Description
Left driver’s seat armrest for CITROËN, PEUGEOT and other Stellantis models
Used part – may be dirty – must be cleaned
Fixed
Part description
Driver’s armrest with product number 9827280780 provides comfortable support for the arm while driving. It is a suitable replacement for a damaged or missing armrest, provided it matches the design and mounting of the original part. Matching the original design helps restore seat comfort without unnecessary modifications to the interior.
This is a used part for the left driver’s seat, described in the supplied information as fixed. It may be dirty and will need cleaning before installation. When choosing, compare the number 9827280780, the shape of the armrest and its mounting method with the existing part.
Technical information
- Manufacturer: not specified; the supplied information gives the designation Stellantis CITROËN PEUGEOT.
- Model: Citroën Berlingo K9, FIAT DOBLO III, OPEL COMBO E K9, PEUGEOT RIFTER, Toyota ProAce City.
- Part type: armrest.
- Application: left driver’s seat.
- Design according to supplied information: fixed.
- Condition: used part, may be dirty; must be cleaned.
- Other numbers: not specified.
The models are taken from the product labels. Specific model years, trim levels and seat configurations are not specified; therefore, the model name alone is not sufficient information for choosing the part.
Product codes
- Product codes: 9827280780.
Use the product number as the main reference when looking for a replacement Citroën Peugeot armrest, and also compare its design and mounting.
Installation recommendations
General guidance for this type of part: the removal and attachment method for the armrest depends on the specific seat and vehicle configuration. The following procedure is general and is not an installation guide for each of the listed models. Check the manufacturer’s service procedure for the exact mounting design.
1) Before installation
- Compare the product number, shape, dimensions and mounting section with the original armrest.
- Inspect the used part, especially for cracks, deformation, surface damage and the condition of the mounting points.
- Also inspect the mating part in the seat. Damaged mounting cannot be fixed simply by replacing the armrest.
- Clean the armrest with a product suitable for its actual surface. Test it first on an inconspicuous area and allow the part to dry.
2) Required tools and materials
- Hand tools suitable for the actual fasteners.
- Plastic trim removal tool for interior covers, if present.
- Soft cloth, suitable cleaning product and protection for the surrounding upholstery.
- Flashlight and a container for safely storing removed components.
3) Step-by-step installation procedure
- Park the vehicle safely, secure it against movement and switch off the ignition.
- Adjust the seat to access the mounting and avoid damaging the surrounding interior. If the work requires disconnecting the seat’s electrical connectors, first follow the manufacturer’s instructions for safely disconnecting the power supply.
- Inspect the original armrest’s mounting and determine the specified release method. Do not try to pull the part out or twist it forcibly.
- If covers conceal the mounting, carefully remove them with a suitable tool without damaging the upholstery.
- Record the position and order of the mounting components, for example by taking a photograph.
- Support the armrest and release its mounting using the method appropriate to the seat design.
- Remove the original part, clean the contact surfaces and check that the seat mounting is not loose or damaged.
- Position the replacement armrest and check that it fits correctly. If the mounting does not match, stop the installation; do not force or modify the part.
- Secure the armrest according to the manufacturer’s service procedure and use only undamaged mounting components suitable for the specific configuration.
- Reinstall any covers, check that they are seated correctly, and remove tools and protective materials from the interior.
4) Post-installation checks and function verification
- While stationary, check that the armrest is firmly attached, has no unusual play and does not come loose when supporting an arm normally.
- Check that it does not interfere with seat adjustment, seat belt use or access to the controls.
- Inspect the surrounding upholstery and any covers. Nothing should be trapped or loose.
- A separate test drive is generally not necessary. During your next drive, listen for any knocking or squeaking; carry out any further checks only after stopping safely.
5) Common installation mistakes and how to avoid them
- Choosing based only on the vehicle model: also compare the product number and mounting design.
- Forcibly removing covers or the armrest: first determine how they are secured and use suitable tools.
- Incorrect tightening or securing: follow the manufacturer’s procedure; excessive force may damage the mounting.
- Overlooking seat damage: check the mating part and its stability before installation.
- Soaking or using aggressive cleaners: use a product suitable for the actual material and allow the part to dry before installation.
Reasons why the part may become damaged
Armrests generally become damaged through long-term use, excessive loads and careless handling. The following causes do not describe defects identified on this specific item.
- Putting body weight on the armrest when getting in or out of the vehicle may overload its structure and mounting.
- Repeated use leads to surface abrasion and gradual wear of the mounting components.
- Impacts while transporting objects may cause cracks or deformation.
- Driving with a loose mounting may increase play and put additional strain on the contact surfaces.
- Unsuitable cleaning and spilled liquids may damage the surface or leave dirt that is difficult to remove.
- Improper removal may damage the covers, retaining components and the mounting itself.






