Description
Gear Shift Knob And Gaiter For Citroën C5 X7 Vehicles
Chrome Trim With Slight Cracks
This replacement gear shift knob and gaiter set is designed for Citroën C5 X7 vehicles and offers a direct-fit solution for worn or damaged interior shift components. The kit includes the shift knob with chrome trim and the leather/PVC gaiter. Note that the chrome trim shows slight cracks, which are visible but do not prevent mechanical function. Ideal for workshop technicians and experienced DIYers looking to restore shift feel and interior appearance quickly.
Overview
The shift knob provides the tactile interface between driver and gearbox, while the gaiter protects the gear lever mechanism from dust and debris and completes the interior finish. This unit is typically used on manual gear levers and fits the Citroën C5 X7 family. The combined replacement improves shifting ergonomics and prevents further wear to the lever surround.
How To Replace
Basic replacement steps (general procedure – follow vehicle-specific guidance if available):
- Park The Vehicle On A Level Surface, Engage The Parking Brake And Switch Off The Ignition.
- Move The Gear Lever To Neutral To Give Better Access.
- Remove The Old Knob: Depending On Variant, The Knob Either Pulls Off With Firm Upward Force Or Is Unscrewed/Released By A Retaining Clip. Use A Trim Tool Or Flat Screwdriver To Release Any Clips Carefully To Avoid Damaging Surrounding Trim.
- Detach The Gaiter From The Centre Console By Releasing Clips Or Removing Fasteners; Slide The Gaiter Off The Lever.
- Install The New Gaiter Over The Lever And Secure Its Base To The Console Fastening Points.
- Fit The New Knob Onto The Lever, Aligning Splines Or Locating Features, Then Push Or Screw Down Until The Retaining Mechanism Clicks Into Place.
- Check Shift Movement Through All Gears To Confirm Proper Seating And Clearance.
Installation Recommendations
- Use Plastic Trim Tools To Avoid Scratching The Console.
- Wear Gloves When Handling The Gaiter To Prevent Transfer Of Oils That Can Accelerate Material Degradation.
- Inspect The Lever Retaining Clip And Any Splines For Wear; Replace If Excessively Worn To Ensure A Secure Fit.
- Do Not Force The Knob If It Does Not Seat Easily—Check Alignment And Fasteners Before Applying Additional Force.
Why This Part Commonly Fails
Shift Knobs And Gaiters Are Subject To Continuous Use And Environmental Stress. Common Failure Modes Include:
- Wear And Abrasion Of The Knob Surface From Frequent Handling.
- Cracking Or Peeling Of Chrome Trim Due To Age, Temperature Cycles And UV Exposure—Explains The Noted Slight Cracks In The Trim.
- Gaiter Deterioration Or Tears Caused By Material Age, Oil/Grease Contamination Or Repeated Flexing.
- Worn Splines Or Retaining Clips Leading To A Loose Or Wobbly Knob.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C5 X7
- Product Codes: 98028381ZD, 759268, 2403HT
- Additional Numbers: 2403HT | 759268 | 98028381ZD
Part Function
The Shift Knob Serves As The Driver Interface For Gear Selection, Providing Grip And Mechanical Connection To The Gear Lever. The Gaiter Protects The Inner Mechanism From Dirt And Moisture, Prevents Drafts Into The Cabin And Improves The Visual Finish Around The Lever.
Who Should Fit This Part
Suitable For Professional Automechanics And Experienced DIY Enthusiasts Comfortable With Interior Trim Removal. Basic Hand Tools And Patience Are Required To Ensure A Clean, Secure Installation.
