Description
Left driver’s side exterior mirror for PEUGEOT 307 vehicles. Electrically adjustable and heated, electrically folding to the vehicle. Color EZRC – Gray Aluminium Paint. 7 Pin (5+2).
This left electric folding and heated exterior mirror is a direct-fit replacement aimed at professional workshops and experienced DIY mechanics working on Peugeot 307. Designed to restore full functionality — electric adjustment, heating element and power-folding — this unit matches the original EZRC finish in Gray Aluminium and uses a 7-pin connector (5+2). Ideal for technicians searching by product code 8149VV or by the EZRC designation.
Key Features
- Electric Adjustment: Smooth motorized mirror position control for precise driver-side visibility.
- Heated Glass: Integrated heating element to speed up defrosting and improve visibility in cold conditions.
- Electric Folding: Power-folding mechanism for protection in tight spaces and automatic folding when required.
- Connector: 7-Pin Configuration (5+2) Compatible With Existing Wiring Harness.
- Finish: EZRC Gray Aluminium Paint To Match Original Exterior Trim.
- Direct Fit: Designed For Driver Side (Left) On Peugeot 307 Models.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 307
- Product Codes: 8149VV
- Other Numbers: EZRC; 7-Pin (5+2); Color: Gray Aluminium Paint
Installation Recommendations
- Disconnect Battery: For electrical safety, disconnect the negative battery terminal before beginning work.
- Remove Interior Trim: Carefully pry off the triangular door trim to access mirror mounting bolts and the electrical connector.
- Unfasten Mounting Bolts: Support the mirror assembly, then remove the mounting bolts holding the mirror to the door.
- Disconnect Connector: Release the 7-pin electrical connector and any clip retainers. Inspect connector pins for corrosion or damage.
- Install Replacement: Position new mirror, connect the electrical plug, and loosely fit mounting bolts. Check alignment, then torque bolts to manufacturer specification.
- Test Functions: Reconnect Battery. Verify Electric Adjustment, Heating Element, And Power Folding Operation Before Reassembling Trim.
- Reassemble Trim: Refit door trim and ensure all clips and fasteners are properly secured.
Why This Part Commonly Fails
- Motor Wear: Repeated use of adjustment and folding motors leads to mechanical wear and eventual failure.
- Water Ingress And Corrosion: Moisture can cause corrosion of internal gears, motor brushes and electrical contacts, especially at the connector.
- Impact Damage: Parking knocks or collisions frequently crack housings or damage the folding mechanism.
- Connector Faults: Bent or corroded pins in the 7-pin connector can result in intermittent or complete loss of function.
- Heater Element Failure: Over time the heating element or its wiring can degrade, reducing defrost performance.
Tips For Diagnostics And Aftercare
- Simple Tests: Check mirror motor operation by applying 12V to the adjustment motor terminals (only if you are experienced) and measure continuity of the heating element with a multimeter.
- Inspect Connector: Clean Pins And Apply Dielectric Grease To Prevent Future Corrosion.
- Lubrication: Periodically lubricate folding joints with appropriate grease to reduce wear and noise.
- Post-Installation Check: Confirm All Functions Work At Cold And Warm Engine Temperatures To Ensure Heater And Motors Operate Normally.
This replacement left mirror is an effective, original-fit solution for restoring safety and convenience features on Peugeot 307 vehicles. Searchable by code 8149VV and EZRC finish, it suits workshops and skilled DIY installers who need a reliable, plug-and-play style repair when the original mirror fails.
