Description
Right passenger armrest for CITROEN and PEUGEOT models
Used part – possibility of contamination – must be cleaned
Part description
This right passenger armrest is designed for selected Citroën and Peugeot cars. It is an interior part that increases the comfort of the crew and at the same time helps to preserve the original appearance of the car’s interior. Parts of this type are also often searched by product number, in this case 8830C2.
The armrest is suitable as a replacement for a damaged, worn or missing original part. Since this is a used auto part, it may show normal signs of use consistent with age and usage. Before assembly, we recommend a thorough visual inspection and cleaning of the part.
- Type of part: right passenger armrest
- Purpose: car interior
- Brand: Citroën / Peugeot
- Searched designation: 8830C2
Technical information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Citroën Berlingo, Citroën C3, Citroën Xsara Picasso, Peugeot 307, Peugeot Partner
- Other numbers: 8830C2, NFP
Product codes
Product codes: 8830C2
- Citroën Berlingo
- Citroën C3
- Citroën Xsara Picasso
- Peugeot 307
- Peugeot Partner
Installation recommendations
Generally and typically for this type of interior part, the exact replacement procedure may vary depending on the specific model and design of the car. The procedure below is a practical general guide for replacing the passenger armrest.
1) Before assembly
- Check whether the new used part corresponds to the original piece in terms of shape, design side and attachment.
- Compare the number 8830C2 with the removed part if it is legible on the original part.
- Check the condition of the upholstery, plastic parts, joint and attachment points.
- Because the part may be dirty, clean it carefully with a suitable interior cleaner before assembly.
2) Necessary tools and materials
- Set of common hand tools
- Screwdrivers or bits according to the type of connecting material
- Plastic pry bar for gentle disassembly of interior covers
- Interior cleaner and clean cloth
- Work gloves and sufficient lighting
3) Step-by-step assembly procedure
- Park the vehicle in a safe place and secure it against movement.
- Prepare your workspace so that the surrounding interior parts are not damaged.
- Carefully access the attachment area of the original armrest, or remove the covering plastic elements if they prevent access.
- Unfasten the fasteners of the original backrest and remove the old part without using force to avoid cracking the brackets or upholstery.
- Compare the dismantled part with the replacement part, especially the fixing, shape and orientation of the right side.
- Clean the contact surfaces and the surroundings of the installation site from dust and dirt.
- Place the armrest in place and check that it is properly seated in the mount without tension.
- Reinstall the fasteners and tighten evenly to avoid warping or damage to the bracket.
- Put back all covers and interior elements that were removed for assembly.
- Test the movement of the armrest, its stability and overall fit.
-
4) Post-assembly checks and function verification
- Check that the backrest is firmly attached and does not have excessive play.
- Verify that it does not make unwanted noises during use and does not restrict the surrounding parts of the interior.
- Check that the backrest moves naturally if its structure is movable.
- Recheck the fastening after a short period of use.
5) The most common assembly mistakes + how to avoid them
- Swapping part side – always check before fitting that it is the passenger’s right armrest.
- Damage to plastic covers – use a suitable plastic pry bar and do not apply brute force.
- Assembly without fitting comparison – always compare the new and original part before fitting.
- Uneven tightening – tighten the fastening gradually and with feeling.
