Alternator Valeo CL8+ Citroën Peugeot 9649611780

€61.00

Stellantis CITROEN PEUGEOT
9649611780 1638104480
5705AW 5705NH 5705FA

1 in stock

Description

VALEO CL8+ alternator for Citroën and Peugeot vehicles

Part description

Used Valeo CL8+ alternator, part number 9649611780, is a component of the charging system in Citroën and Peugeot vehicles. When the engine is running, the alternator supplies power to electrical accessories and charges the battery. Its proper operation is important for reliable starting and a stable power supply to the vehicle’s electrical equipment.

When replacing a faulty alternator, matching the product designation and design is essential. This part offers a repair option using a used Valeo alternator. Specific vehicle models, engine versions, and electrical specifications are not provided in the information available, so compare the listed numbers and design with the original part when selecting a replacement.

Technical information

  • Manufacturer: Valeo
  • Model: not specified; only the Citroën and Peugeot vehicle makes are listed
  • Alternator designation: CL8+
  • Part type: alternator
  • Condition: used part
  • Main product number: 9649611780
  • Additional numbers: 1638104480, 5705AW, 5705NH, 5705FA
  • Rated voltage and charging current: not specified

Product codes

Product codes: 9649611780, 1638104480, 5705AW, 5705NH, 5705FA.

These designations are listed in the product information and can help you search for a replacement alternator. In addition to matching the designations, compare the mounting points, electrical connections, and pulley with the old part.

Installation recommendations

The following procedure is a general guide to replacing an alternator. Access to the part, the method for releasing the belt, and the procedure for working on the electrical system depend on the specific vehicle model and configuration. Follow the vehicle manufacturer’s service instructions.

1) Before installation

  • Compare the designations on the original and replacement alternators, housing shape, mounting points, electrical connectors, and power cable terminal.
  • Check that the pulley design, offset, and grooves match. Compare electrical specifications using the labels and service data.
  • Inspect the used part, especially for cracks in the housing, damaged threads, connectors, corroded contacts, and signs of contamination by oil or other fluids.
  • Check that the pulley turns freely by hand; significant play, binding, or unusual noise should be assessed before installation. Spinning it alone does not confirm electrical functionality.
  • Also check the battery, wiring, ground connections, and accessory drive. A charging fault may not be caused by the alternator alone.

2) Tools and materials required

  • A standard set of wrenches and sockets, a torque wrench, and suitable tools for releasing belt tension, depending on the vehicle configuration.
  • A multimeter or, if available, a suitable instrument for checking the charging system.
  • Materials for safely cleaning contacts, a clean cloth, and protective gloves.
  • A means of recording the belt routing and cable connections before removal.

3) Step-by-step installation procedure

  1. Secure the vehicle safely, switch off the ignition, and let the engine cool.
  2. Follow the prescribed procedure for putting the electronics to sleep and disconnect the battery in accordance with the manufacturer’s instructions. Do not work on the alternator’s high-current connection while it is live.
  3. Gain access to the alternator by removing only the covers or surrounding components required for the specific vehicle configuration.
  4. Record the auxiliary belt routing, connector positions, and cable layout.
  5. Release the tension as prescribed and remove the belt from the alternator pulley. Check the belt condition and the condition of any accessible pulleys.
  6. Disconnect the alternator’s electrical connections. Release connector locks without force and secure the cables to prevent damage.
  7. Support the alternator, loosen its fasteners, and carefully remove it.
  8. Compare the two parts side by side and clean the mating surfaces. Check the condition of the fasteners and brackets.
  9. Position the replacement alternator without forcing it into place. Tighten the fasteners in the order and to the values specified by the vehicle manufacturer.
  10. Connect the electrical wiring, secure the connectors, and refit the protective terminal covers. Route the cables away from moving and hot parts.
  11. Fit the belt according to the recorded routing and restore the correct tension using the prescribed procedure. Check that it is seated in all grooves.
  12. Refit the removed components, check the work area, and reconnect the battery according to the manufacturer’s procedure.

4) Checks after installation and function testing

  • After starting the engine, check the charging warning light and any vehicle warnings.
  • From a safe distance, check that the belt is running smoothly and listen for squealing, binding, or knocking. Keep hands and tools away from the drive while it is running.
  • Measure charging system operation according to the service procedure, including with electrical accessories switched on if applicable. Assess the results according to the vehicle’s specific charging system.
  • Never test the alternator by disconnecting the battery while the engine is running. This may damage the electronics.
  • If the checks reveal no problems, take a short test drive. After switching off the engine, visually recheck the belt, fasteners, and cable routing.

5) Common installation mistakes and how to avoid them

  • Choosing based only on the vehicle make: always compare the product numbers, electrical specifications, and mechanical design.
  • Working with the battery connected: safely disconnect the power supply according to the service instructions before handling high-current contacts.
  • Incorrect belt routing or seating: record the routing before removal and check all grooves before starting the engine.
  • Dirty or loose contacts: check that the connections are clean and secure and that they are protected against short circuits.
  • Overlooking the original cause of the fault: fix any fluid leaks, tensioning faults, or wiring problems to prevent damage to the replacement part as well.

Reasons why the part may be damaged

Alternators can generally fail as a result of normal wear and tear or faults in surrounding components. The following list does not describe the condition observed on this particular unit.

  • Wear to the bearings, brushes, and slip rings over prolonged use.
  • Failure of the regulator or rectifier section, which can result in insufficient or unstable charging.
  • Ingress of oil, water, or other contaminants, which damages electrical and mechanical components.
  • Faults in the belt, tensioning system, or pulleys, which can cause slipping, vibration, and increased bearing stress.
  • Faulty electrical connections and grounds, leading to contact resistance, overheating, and charging problems.
  • Prolonged overloading, a short circuit, or improper handling of the battery, which can damage the alternator’s electrical components.

Additional information

Weight 6 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.