Seat belt buckle Citroën Peugeot 98163195480

€36.00

Stellantis CITROEN PEUGEOT
98163195480

1 in stock

SKU: 9982-L6_K18 Categories: , , , Tag:

Description

Seat belt buckle for various CITROEN, PEUGEOT and other Stellantis models
Short – for the front passenger seat

Part description

This used seat belt buckle 98163195480 in the short version is intended for the front passenger seat. It secures the seat belt tongue and releases it when unfastened. It is a suitable choice when replacing a damaged or unreliable buckle, provided it matches the original part and the vehicle specification.

When selecting a part, compare above all the product number 98163195480, length, shape and mounting method. Matching the model name alone is not sufficient to identify the correct variant. For a safety component, not only correct installation is important, but also faultless operation of the locking mechanism.

Technical information

Product codes

  • Product codes: 98163195480

Compare the number with the marking on the original buckle and the catalog specification for the specific vehicle version.

Installation recommendations

The following generally applies to this type of part: the seat belt buckle is part of the safety restraint system. The procedure below is general; exact access, mounting and any electrical connection depend on the specific model and vehicle version. We recommend having the replacement carried out by a qualified mechanic and following the manufacturer’s service documentation.

1) Before installation

  • Compare the part number, short version, body shape, mounting and any connector with the original part.
  • Inspect the housing, release button and mounting section. Cracks, deformation, significant corrosion or signs of forced tampering are reasons not to use the part.
  • Check that the corresponding belt tongue clicks in and releases smoothly. However, a manual test alone does not confirm the overall safety of the part.
  • If there is any suspicion that the part was subjected to a load in an accident, or any doubt about the condition of the buckle, do not install it without an expert assessment.

2) Tools and materials required

  • Hand tools suitable for the fasteners used and a torque wrench.
  • Where required for access, suitable tools for carefully removing covers.
  • A flashlight, clean cloth and service documentation for the specific vehicle.
  • If the version includes an electrical connection, diagnostic equipment may be needed for subsequent checks.

3) Step-by-step installation procedure

  1. Secure the vehicle against movement, switch off the ignition and prepare a safe work area.
  2. Check the replacement procedure and the rules for working near the restraint system in the service documentation. If disconnecting the battery is required, follow the specified procedure and waiting time.
  3. Gain access to the buckle mounting. Remove covers or other components only to the extent required for the specific version.
  4. Note the original orientation of the buckle, the arrangement of the fasteners and any cable routing.
  5. If an electrical connector is present, release its locking tab and disconnect it without pulling on the wires.
  6. Use a suitable tool to release the fastener and remove the original buckle. Check the condition of the contact surface and mounting point.
  7. Compare the two parts again. If the mounting, length or connection differs, do not proceed with installation and do not modify the buckle.
  8. Position the replacement buckle in the correct orientation. Follow the manufacturer’s instructions regarding whether the fasteners can be reused and tighten them to the specified torque.
  9. Connect and secure any wiring so that it is not pinched or stretched when the seat moves. Reinstall any covers that were removed.
  10. If the battery was disconnected, restore power according to the manufacturer’s procedure and carry out functional checks before using the vehicle.

4) Post-installation checks and function verification

With the vehicle stationary, fasten and unfasten the belt several times. The tongue must click securely into place, remain locked when pulled by hand and release when the button is pressed. Check that the buckle is firmly mounted and moves freely without interfering with the seat. If the vehicle monitors belt fastening, also check that the indicator works correctly and that there are no restraint system faults. Do not use the passenger seat if anything is irregular. A test drive is not a substitute for checking seat belt function.

5) Common installation mistakes and how to prevent them

  • Selecting based on the model alone: also compare the product number and design version.
  • Incorrect orientation or tightening: follow the service procedure rather than guessing.
  • Pinched wiring: if there are wires, check them also when changing the seat position.
  • Lubricating or disassembling the mechanism: unless expressly instructed by the manufacturer, do not apply lubricants to the buckle or interfere with its internal components.
  • Overlooking accident damage: do not use a suspect part; have the entire affected restraint system assessed.

Reasons why the part may become damaged

Seat belt buckles in general may be damaged for the following reasons; this is not a description of any defects identified in this particular part:

  • Wear of the locking mechanism and button due to repeated use.
  • Dirt, small objects or spilled liquids entering the buckle.
  • Mechanical stress, impacts and forcibly inserting an unsuitable tongue.
  • Loads during a traffic accident, which may not be visible on the outer housing.
  • Incorrect removal or improper mounting.
  • For electrically connected variants, damage to wires or the connector as well.

Additional information

Weight 1.2 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.