Passenger armrest Citroën Peugeot 9826490980

€42.00

Stellantis CITROEN PEUGEOT
9826490980

1 in stock

SKU: 9967-F8_K24 Categories: , , , Tag:

Description

Right armrest for the front passenger seat for CITROEN, PEUGEOT, and other Stellantis models
Used part – may be dirty – must be cleaned
Fixed

Part Description

Citroën Peugeot passenger armrest 9826490980 supports the forearm and makes journeys more comfortable. This used interior part, in a fixed design, is intended for the right front passenger seat and provides a practical replacement for a damaged or worn armrest, provided it matches the original mounting and seat design.

When choosing, compare the product number 9826490980, shape, and mounting section with the old part in particular. Please note that it may be dirty: the part must be cleaned before use. The specific color and surface material are not listed in the available information.

Technical Information

The model names are taken from the product labels. They do not mean that the armrest is identical across all seat variants; the matching shape and mounting are also decisive.

Product Codes

  • Product codes: 9826490980.

Use the number 9826490980 when searching for a replacement armrest and comparing it with the marking on the original part.

Installation Recommendations

The following procedure applies generally to this type of interior part. The exact mounting mechanism is not described in the available information. Therefore, adapt removal and installation to the specific seat and the vehicle manufacturer’s service instructions.

1) Before installation

  • Compare the part marking, shape, dimensions, orientation, and mounting method with the original armrest.
  • Inspect the used part, especially the load-bearing and mounting sections. Do not install an armrest with cracked or deformed mounting.
  • Also check the mating part on the seat. Damaged seat mounting can cause looseness even after the armrest is replaced.
  • Clean the surface with a product suitable for the actual material. Test it first in an inconspicuous area, do not soak the part, and let it dry.

2) Tools and materials required

  • Hand tools suitable for the actual type of mounting.
  • Plastic removal tool for any covers.
  • Soft cloths, a suitable cleaning product, and protection for the surrounding upholstery.
  • A container for removed fasteners and adequate lighting.

3) Step-by-step installation procedure

  1. Park the vehicle in a safe place, secure it against movement, and switch off the ignition.
  2. Adjust the seat to make the mounting accessible, and cover the surrounding upholstery to protect it from damage.
  3. Inspect the original mounting and determine how to release it in accordance with the service procedure. Do not tamper with unknown mechanisms or electrical seat connectors.
  4. If the mounting is covered by a cap, carefully release it with a suitable tool. Do not force it off without knowing the position of the clips.
  5. Before disassembly, record the armrest orientation and the order of the mounting components, for example by taking a photo.
  6. Hold the armrest in place and release its locking mechanism in a way appropriate to the mounting design.
  7. Remove the original part without using force. If it will not release, first check whether it is still secured by another component.
  8. Clean the contact surfaces and inspect the seat mounting. Stop installation if there are cracks, deformation, or a damaged joint.
  9. Compare the removed armrest and the replacement side by side. Do not modify a different mounting by drilling, grinding, or forcing it into place.
  10. Position the replacement armrest in the correct orientation and secure it according to the manufacturer’s instructions. If the joint is bolted, follow the specified tightening procedure.
  11. Refit any covers and check that everything is seated correctly, the mounting is secure, and the adjacent seat components move freely.

4) Post-installation checks and function verification

  • With the vehicle stationary, apply moderate hand pressure to the armrest. It must not come loose, shift in its mounting, or exhibit unusual play.
  • Check that it does not obstruct seat controls, the seat belt, or access to the seat belt buckle.
  • If everything is securely fastened, listen for any knocking or squeaking during a short test drive. Perform any further checks or tightening only after stopping safely.

5) Common installation mistakes and how to avoid them

  • Choosing based only on the model name: also compare the product number, shape, and actual mounting.
  • Forcing covers off: first determine how they are secured and use suitable removal tools.
  • Mixing up the order of mounting components: photograph the assembly before disassembly and keep the parts organized.
  • Installing into a damaged mating part: check the condition of the seat mounting before fitting the replacement armrest.
  • Insufficient or excessive tightening: follow the manufacturer’s instructions rather than relying on guesswork or force.
  • Using harsh cleaning methods: choose a product suitable for the surface, limit moisture, and install the part only after it has dried.

Reasons Why the Part Gets Damaged

The following are common causes of damage to armrests. This is not a description of defects found on the item being offered.

  • Excessive loading: putting the full weight of the body on the armrest when getting in or out can damage the load-bearing section or mounting.
  • Everyday wear: prolonged use puts strain on the surface and mounting components, which may gradually develop play.
  • Impacts and snagging on objects: careless handling of luggage or other objects can damage both the surface and the structure.
  • Improper maintenance: harsh products, stiff brushes, and excessive moisture can damage the armrest surface.
  • Incorrect removal or installation: forceful prying, incorrect positioning, and improper tightening can damage the mounting.

Additional information

Weight 0.9 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.