Description
Gear Selector Lever, Gearshift Selector For PEUGEOT 308 T7. Without Bowden Cables.
This genuine-style gear selector lever is intended for Peugeot 308 (T7) applications and is often sought under part numbers 9672042980 or 2400KK. Designed for workshop fitment, the unit provides precise gear selection feedback and a direct mechanical interface to the transmission linkage. Supplied without Bowden cables, it is suitable for installations where the existing cable set is reused or when replacing the lever only.
Technical Information
- Manufacturer: Stellantis / Peugeot / Citroën
- Model: Peugeot 308 T7
- Product Codes: 9672042980, 2400KK
- Additional Numbers: 2400.KK, 2400KK, 9672042980
Application and Compatibility
Fits Peugeot 308 models designated T7 where the vehicle uses a separate gear selector lever with cable-actuated linkage. This part is commonly searched by its OEM numbers (9672042980, 2400KK), so entering these codes in parts catalogs will typically return this exact item.
Function
The gear selector lever translates the driver’s shift input into movement transmitted via the shift cables (Bowden cables) or direct linkage to the transmission. It contains the pivot, mounting points and often bushings or plastic bearings that ensure smooth, accurate gear changes. As this unit is supplied without Bowden cables, the linkage cables must be present or sourced separately.
Replacement and Installation
High-level replacement steps (for experienced mechanics or qualified DIY personnel):
- Park the vehicle on a level surface and engage the parking brake.
- Disconnect the battery to prevent accidental electrical issues while working around interior trim and electrical connectors.
- Remove interior trim panels or center console pieces necessary to access the selector assembly.
- Note cable routing and any retaining clips; mark positions if necessary to preserve adjustment.
- Disconnect shift cables from the selector (observe any retaining clips) and unbolt the selector from its mounting points.
- Install the new selector in reverse order, ensuring correct seating of bushings and correct cable attachment.
Adjust cable free play and end-stops to manufacturer specification and verify smooth gear engagement across all gears. - Reassemble trim panels, reconnect the battery, and perform a road test to confirm correct operation.
Mounting Recommendations
- Use correct tools and avoid forcing plastic clips or bushings; replace any damaged retaining clips.
- Check and, if necessary, replace worn shift cables when replacing the selector—worn cables are a frequent cause of imprecise shifting.
- Tighten fasteners to the vehicle manufacturer’s torque specifications where available.
- Inspect surrounding trim seals and gaiters to prevent dirt ingress that accelerates wear.
Most Common Failure Causes
Selector levers typically fail due to mechanical wear and tear or impact damage. Common issues include worn plastic bushings or bearings that create play in the lever, fractured mounting ears or plastic components, corrosion on metal linkages, and contamination from dirt or spilled liquids that cause increased friction. Symptoms of a failing selector include loose or vague gear selection, difficulty engaging gears, gear popping out of engagement, or an inconsistent detent feel when shifting.
Why Choose This Part
Ordering by OEM number (9672042980 / 2400KK) ensures you receive the correct geometry and fitting points for Peugeot 308 T7 applications. The unit is aimed at professional garages and competent DIYers who need a direct-fit replacement lever when the original component has worn bushings or mechanical damage.
Notes
This product is supplied without Bowden cables; verify whether your vehicle requires new cables or if the originals can be reused during installation. Search terms that improve findability: Peugeot 308 gear selector, gearshift selector 9672042980, 2400KK shift lever.
