Description
Left rear passenger seat belt for Peugeot 206 and 206+. Color FXX – BLACK
Overview
This left rear pyrotechnic seat belt is a direct-fit safety component for Peugeot 206 and 206+ models. Designed for mechanics and experienced DIYers, the assembly includes a pretensioner intended to remove slack in severe impacts and keep occupants secured. It fits original mounting points and carries the OE-style reference numbers commonly used when searching parts catalogues.
Key Features
- Left Rear (Passenger Side) Seat Belt Assembly
- Pyrotechnic Pretensioner (activates in significant collisions to reduce slack)
- Color: FXX – Black
- Direct fit for Peugeot 206 and Peugeot 206+
- Ideal for replacement after deployment or visible damage
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 206, Peugeot 206+
- Product Codes: 96544969XX
- Additional Numbers: 8975QY, 8975R2, 8975.QY, 8975.R2
Compatibility And Fitment
Fits Peugeot 206 and 206+ models that use left rear pyrotechnic seat belt assemblies with the above product codes. Always verify the mounting style and connector shape against the original part before installation.
How The Part Works
The seat belt restrains rear-seat occupants during normal driving and locks under sudden deceleration. The integrated pyrotechnic pretensioner is designed to activate in a severe impact, removing slack from the belt webbing to position the occupant correctly before load-limiting occurs.
Replacement Procedure (Summary)
- Disconnect the vehicle battery and wait at least 10 minutes to allow SRS capacitors to discharge.
- Remove interior trim panels to expose belt mounting points and electrical connector for the pretensioner.
- Unbolt the lower anchor, retractor, and buckle mounting bolts (retain hardware if required by workshop practice).
- Disconnect the electrical connector from the pretensioner module carefully.
- Fit the new assembly in reverse order, ensuring the retractor and buckle are correctly aligned and bolts are tightened to the manufacturer’s torque specification.
- Reconnect the battery and use a diagnostic tool to check SRS system status and clear any fault codes where applicable.
Installation Recommendations
- Always follow the vehicle manufacturer’s service manual and torque specifications.
- Disconnect the battery before starting work and wait to ensure the SRS system is de-energized.
- Inspect mounting points and wiring for corrosion or damage; replace any compromised fasteners or connectors.
- After fitting, verify correct operation of seat belt buckles and check that the SRS warning light behaves normally. Use appropriate diagnostic equipment if necessary.
Common Failure Causes
- Deployment During A Collision – Pyrotechnic pretensioners must be replaced after activation.
- Webbing Wear Or Contamination – Cuts, fraying, or heavy soiling reduce effectiveness and require replacement.
- Retractor Failure – Mechanical jamming or internal corrosion can prevent correct extension/retraction.
- Electrical Connector Corrosion Or Damage – Can prevent pretensioner signaling or cause SRS faults.
- Age And Environmental Degradation – Prolonged exposure to moisture or chemicals accelerates wear.
Why Choose This Part
This assembly provides a straightforward replacement for left rear seat belt failures or post-collision renewals on Peugeot 206 and 206+ vehicles. With OE-style reference numbers and correct fitment for the intended models, it helps restore rear-seat occupant protection to the vehicle’s original specification.
Note
Replace any pyrotechnic-equipped seat belt after deployment or if there is any visible damage. Professional installation is recommended for those without experience in SRS-related repairs.
