Direct-fit air conditioning tube designed for Stellantis vehicles from the Citroën and Peugeot families. This climate pipe (common references 9684368380, 6477F4, 9831991080, 9819864880) routes refrigerant within the A/C circuit and is suitable for a range of models including Peugeot 308, 3008, 5008 and RCZ as well as Citroën C4 variants and C4 Picasso. Built to OEM mounting points and connection geometries, it helps restore proper refrigerant flow and prevents leaks that cause loss of cooling performance. Ideal for professional workshops and experienced DIYers performing A/C repairs or component replacements.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: PEUGEOT 308, 3008, 5008, RCZ; CITROËN C4, C4 II, C4 PICASSO
• Product Codes: 9684368380, 6477F4, 9831991080, 9819864880
• Additional Numbers: (T84), (T87), R134A

Function And Application

The tube is a fixed pipe/hose element of the vehicle air conditioning system that transports refrigerant between components such as the condenser, evaporator, compressor and receiver-drier/accumulator. It ensures leak-free routing under operating pressure and temperature while maintaining correct bend radii and mounting clearances specific to the vehicle models listed.

Replacement Procedure (Overview)

Replacement of the A/C tube should be performed by qualified personnel or skilled DIY mechanics with proper equipment. Typical steps:

• Recover Refrigerant: Safely evacuate and recover the R134a refrigerant using certified recovery equipment.
• Access And Remove: Remove any protective covers or brackets to access the tube. Undo fasteners and quick-connect fittings. Keep track of clamps and mounting hardware.
• Inspect And Replace Seals: Replace all O-rings and sealing elements on connections with correctly sized, lubricated O-rings (use compatible PAG oil) to ensure proper sealing.
• Install New Tube: Fit the new tube into position, secure brackets and connectors to OEM torque where specified, and ensure proper routing without kinks or contact with moving parts.
• Vacuum And Recharge: Evacuate the system to remove moisture and air, then recharge with the correct type and quantity of refrigerant (R134a) to manufacturer specifications.
• Leak Test And Function Check: Perform a pressure/leak test and verify cooling performance and system pressures during operation.

Installation Recommendations

• Always use certified refrigerant recovery and charging equipment; do not vent refrigerant to atmosphere.
• Replace O-rings at every sealing connection and lubricate them with the correct oil (PAG) to prevent leaks.
• Inspect adjacent components (compressor, condenser, receiver-drier, expansion valve) for damage or contamination; contaminated oil/detritus can damage the new tube.
• Perform a vacuum and leak test after fitting and before final charging. Verify system pressures and temperatures with diagnostic gauges.
• Follow vehicle manufacturer procedures and torque values for clamps and fittings where available.

Why This Part Most Often Fails

Common failure causes for A/C tubes include corrosion (especially in regions with road salt or high humidity), mechanical damage from road debris or incorrect routing, degradation of O-rings and seals leading to slow leaks, and stress from vibration or improper mounting. Contamination inside the A/C system (moisture, debris, or degraded oil) can accelerate wear and lead to blockages or localized corrosion. Failures typically occur after several years of service, but life expectancy depends on driving conditions and maintenance history.

Notes For Buyers

Use the product codes listed above (9684368380, 6477F4, 9831991080, 9819864880) when searching for exact matches. This item is intended for vehicles using R134a refrigerant. For best results, pair replacement of the tube with inspection or replacement of the receiver-drier/accumulator and replacement of O-rings.

This high quality air conditioning pipe fits a range of Peugeot and Citroën models and is a direct replacement for the original line that routes refrigerant between components in the A/C system. Ideal for professional workshops and experienced DIY mechanics, the pipe is often searched by product codes 9658227580, 9653227580 and 647736, so listing these numbers helps you find the exact part quickly.

Key Features

• Direct fit for specific Peugeot and Citroën models, designed to match original routing and connections.
• Compatible with R134a refrigerant systems commonly used in the affected model range.
• Durable construction to resist vibration and typical underbonnet conditions.
• Supplied without O rings or refrigerant; replace sealing elements during installation to ensure leak free operation.

Fitment

Fits the following models: Peugeot 308, Peugeot 3008, Peugeot 5008, Peugeot RCZ, Citroën C4 and Citroën C4 Picasso. Check the product codes 9658227580, 9653227580 and 647736 when searching for compatibility with individual vehicle variants.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 308, Peugeot 3008, Peugeot 5008, Peugeot RCZ, Citroën C4, Citroën C4 Picasso
• Product Codes: 9658227580, 9653227580, 647736
• Additional Numbers: 647736

Installation Recommendations

Replacement of an A/C pipe should be performed by a qualified technician or an experienced DIYer with appropriate tools. Recover refrigerant from the system using certified recovery equipment before removal. Replace O rings and seals with new, correctly sized parts and lubricate them with the correct type of PAG oil. After fitting, evacuate the system with a vacuum pump to check for leaks and remove moisture, then recharge with the correct amount and type of refrigerant. Perform a functional check of the entire air conditioning system and inspect fittings for leaks using electronic leak detector or UV dye if available. Always follow manufacturer safety procedures and disconnect the battery if required by the vehicle manufacturer before beginning work.

Common Failure Causes

Air conditioning pipes typically fail due to corrosion at joints, chafing against adjacent components, vibration fatigue, or damage from previous repairs. Leaks most often occur at flare fittings, crimped joints or where O rings have aged or been reused. Contamination or excessive pressure from an obstructed system can also accelerate wear.

Why Choose This Replacement

Choosing the correct A/C pipe with verified product codes reduces diagnostic time and prevents repeat repairs. This pipe offers an economical solution to restore system integrity and cabin cooling performance when original lines are leaking or mechanically damaged. Including the exact product codes in your search improves the chance of a direct fit and faster repair.

Description

Replacement floor console panel surrounding the gear lever for first‑generation Peugeot 3008 and 5008. This trim piece provides the visible finish around the shift lever, secures the shift boot, and serves as the aesthetic and protective cover for mounting points on the center console. Supplied in Tramontane (HZE) color to match interior trim of original equipment.

Key Features And Benefits

• Direct fit for First Series Peugeot 3008 and 5008 models that use the referenced part numbers.
• OEM‑style finish in Tramontane (HZE) to maintain interior appearance and resale value.
• Replaces worn, cracked or discolored factory panel and broken mounting clips.
• Includes factory mounting locations for secure, vibration‑free installation.

Compatibility

Designed For: Peugeot 3008 I, Peugeot 5008 I. Often Searched By Part Numbers: 9685858777, 7591P7.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 3008 I; Peugeot 5008 I
• Product Codes: 9685858777, 7591P7
• Additional Numbers: 7591.P7, T84, T87

Installation Recommendations

Suitable For Experienced Mechanics And Competent DIYers. Typical Replacement Steps:

1. Park Vehicle On Level Surface And Engage Parking Brake.
2. If The Panel Incorporates Electrical Switches Or Connectors, Disconnect The Battery Before Starting.
3. Remove The Gear Knob According To The Vehicle Procedure (Pull Off Or Unscrew Depending On Variant) And Retract The Shift Boot.
4. Unscrew Any Visible Fasteners And Carefully Release Trim Clips Around The Panel Using Trim Tools To Avoid Breakage.
5. Disconnect Any Electrical Connectors If Present, Then Remove The Old Panel.
6. Fit The New Panel Aligning Clips And Fasteners, Reattach Screws To The Specified Tightening Sequence, And Reconnect Electrical Plugs.
7. Refit The Shift Boot And Knob, Reconnect The Battery If Disconnected, And Verify Full Range Of Gear Movement And Proper Operation Of Any Associated Switches.

Use Plastic Trim Tools To Prevent Damage To Surrounding Surfaces. Replace Broken Clips Or Fasteners As Needed For Secure Mounting.

Why This Part Commonly Fails

• Wear And Tear: Constant contact, scuffs, and abrasion from driver use cause surface degradation and fading over time.
• Broken Mounting Clips: Clips And Tabs Become Brittle With Age Or During Previous Removals, Leading To Loose Fitment Or Rattles.
• Impact Or Forceful Removal: Improper Removal Techniques Can Crack The Panel Around Mounting Points.
• Spills And UV Exposure: Liquids, Sunlight And Heat Accelerate Discoloration And Material Deterioration.

Practical Tips

• Inspect Mounting Clips And Replace Damaged Clips During Installation To Ensure A Tight Fit.
• Keep A Small Stock Of Trim Screws And Clips If You Regularly Service These Models.
• Match The Color Code (HZE Tramontane) To Interior Trim When Ordering To Avoid Visible Mismatch.

Product Overview

This antenna cable assembly routes FM radio and GPS signals from the vehicle antenna into the dashboard head unit. It is a direct-fit replacement aimed at professional garages and experienced DIY mechanics who need reliable radio reception and navigation signal integrity for Peugeot 3008 I and Peugeot 5008 I. The part is commonly searched by its product numbers 9664381680, 6561XT and 6561YS.

Function And Benefits

The cable transmits both FM broadcast signals and GPS satellite signals to the infotainment/navigation unit. Built as a shielded coaxial assembly, it preserves signal strength and reduces interference, which improves radio clarity and GPS lock stability. Replacing a damaged cable restores lost stations, reduces static, and prevents intermittent GPS reception issues.

Fitment And Compatibility

Compatible With: Peugeot 3008 I, Peugeot 5008 I. Known Product Numbers: 9664381680, 6561XT, 6561YS. Other Identifiers: T84, T87. Use the listed part numbers when searching or ordering to increase the chance of an exact fit.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 3008 I; Peugeot 5008 I
• Product Codes: 9664381680; 6561XT; 6561YS
• Additional Numbers: T84; T87

Installation Recommendations

Before starting, always disconnect the negative battery terminal. Typical replacement steps: remove the relevant dashboard trim or glovebox to access the antenna junction, unclip the old cable from antenna and head unit connectors, route the new cable following factory clips and grommets to avoid chafing, connect firmly and secure with original retainers. After installation, reconnect the battery and verify FM radio reception and GPS fix. If routing requires removal of roof lining or pillar trims, perform those steps carefully to avoid damaging clips or insulation. For safe, reliable installation in vehicles with complex dashboards, use proper trim tools and follow manufacturer procedures.

Most Common Failure Causes

Antenna cable failures usually result from connector corrosion, broken or bent connector pins, physical damage from wear or improper routing, water ingress around roof or aerial base, or crushing/cutting during previous repairs. Symptoms include weak or intermittent FM reception, missing radio stations, poor GPS signal or slow satellite lock. Replacing the cable and ensuring correct routing and sealing typically resolves these issues.

Practical Notes For Mechanics And DIYers

Keep the part numbers handy when ordering or searching online: 9664381680, 6561XT, 6561YS. Inspect connectors and mating sockets for corrosion or deformation before installation. Test the head unit with the new cable connected before reassembling trim to confirm successful repair and avoid repeat disassembly.

High-quality rear seat belt designed for mechanics and DIY enthusiasts who service Peugeot and Citroën vehicles. This seat belt fits the rear seating positions on the first-generation Peugeot 3008 and 5008, offering a direct replacement for worn, damaged or deployed units. Often searched by product code 8975HY, the assembly is the original equipment fitment style used by Stellantis/Peugeot/Citroën and restores correct restraint performance and appearance in the vehicle interior.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 3008 I, Peugeot 5008 I (First Generation)
• Product Codes: 8975HY
• Other Numbers: Color Code FXX (Black); Tags/References: T84, T87

Features And Function

The rear seat belt provides primary occupant restraint in the rear seating position and is engineered to lock on sudden vehicle deceleration. Depending on vehicle specification, the assembly may include a retracting mechanism (retractor) and, on some models, pretensioner components. The belt webbing and anchorage restore the seatbelt system to safe, serviceable condition after wear or activation.

Replacement And Installation

General replacement steps for an experienced mechanic or competent DIYer:

• Disconnect The Battery Before Starting Work And Follow Manufacturer Procedures To Avoid Risk Of Airbag Or SRS System Damage.
• Remove Interior Trim Panels To Access Retractor And Anchor Bolts. Retain Fasteners And Clips For Reassembly.
• Unbolt The Lower Anchorage And Retractor Mounting Bolts. Carefully Remove The Old Assembly, Observing Routing And Orientation.
• Install The New Seat Belt In The Same Routing Orientation. Hand-Tighten Fasteners, Then Torque To Manufacturer Specifications.
• Reinstall Trim Panels And Reconnect The Battery. Verify Belt Retracts Smoothly, Latches Securely, And Locks Under A Quick Tug (Emergency Locking Function).

Always Use Correct Tools And Torque Values Specified By Peugeot/Citroën. If The Vehicle Is Equipped With A Pretensioner, Follow SRS Safety Instructions Provided By The Manufacturer.

Why This Part Fails Most Often

• Wear And Abrasion Of Webbing From Regular Use Or Improper Loading.
• Contamination (Oil, Chemicals, Debris) Leading To Reduced Material Strength Or Stiction In The Retractor.
• Corrosion Or Damage To Mounting Points And Bolts Causing Compromised Fixation.
• Pretensioner Deployment In A Crash — After Deployment The Belt Assembly Must Be Replaced.
• Retractor Failure Due To Internal Mechanism Wear Or Dirt Ingress.

Recommendation For Fitment

Inspect Mounting Hardware And Seat Belt Retractor Before Fitment. Replace Any Corroded Bolts Or Damaged Anchors. After Installation, Check Belt Operation Thoroughly: Smooth Retraction, Full Extension Without Snags, And Positive Locking On Sudden Pull. If The Vehicle Has SRS Components Related To The Seat Belt, Observe Safety Precautions And Follow The Manufacturer Service Manual.

Notes For Buyers

Part Commonly Searched By Code 8975HY. Intended For Rear Left Or Right Positions Behind Driver Or Passenger In First-Generation Peugeot 3008 And 5008 Models. Color: Black (FXX).

OEM-style protective trim designed for the area in front of the left exterior mirror on Peugeot 3008 I and 5008 I. The chrome-accented strip in Onyx Black (EXY) restores the vehicle’s original appearance after impact or wear, providing an exact visual match and clean finish. Frequently searched by part numbers 96842433XY, 96842433XT and 9025T2, this trim is ideal for professional workshops and DIY mechanics who want a direct-fit replacement that maintains factory aesthetics.

Benefits

• Factory Fit: Designed to match the original panel lines and mounting points.
• Correct Finish: Chrome accent combined with Onyx Black EXY color for authentic appearance.
• Quick Replacement: Simple clip- and screw-type attachment allows fast repair in the bodyshop or garage.
• Improves Visual Integrity: Replaces scuffed or broken trim to prevent moisture ingress and further body damage.

Fitment

Intended For: Peugeot 3008 I, Peugeot 5008 I. Driver Side (left).

Installation Recommendations

• Perform work on a clean, level surface and protect painted areas with masking tape to avoid scratches.
• Use plastic trim tools to pry clips gently; metal tools can damage paint or the new trim.
• Inspect and replace any broken clips or retainers — brittle clips are a common cause of poor fitment after removal.
• Clean mating surfaces and remove old adhesive residues before fitting to ensure secure seating.
• Tighten any retaining screws to manufacturer torque where applicable and check alignment before final pressing of clips into place.

Most Common Failure Reasons

• Impact Damage: Kerb strikes, shopping trolleys, or door impacts commonly crack or deform the trim.
• Clip Degradation: UV exposure and age make plastic clips brittle, causing the trim to loosen or rattle.
• Surface Wear: Stone chips, abrasions and weathering dull the chrome accent and paint finish over time.
• Improper Previous Removal: Damage from levered removal with metal tools can break mounting points.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 96842433XY, 96842433XT, 9025T2
• Other Numbers: 9025.T2, T84, T87

Suitable for professional bodyshops and experienced DIY enthusiasts. Replace damaged clips and check surrounding panels for secondary damage when fitting. Using correct trim tools and following the steps above will ensure a neat, durable repair.

This genuine-style floor console panel is a direct replacement for Peugeot 3008 and 5008 first generation interiors. Supplied in Color HZE (Tramontane), the panel restores factory appearance in the lower center-console area and helps maintain original fitment and finish. Often searched by part numbers 9685097277 and 7591P6, this item is aimed at professional technicians and competent DIYers performing interior repairs or refurbishments.

Key Benefits

• Direct fit for First Generation Peugeot 3008 and 5008 — no trimming or modification required when matching the correct variant.
• Factory Color HZE – Tramontane for seamless visual integration with original interior trims.
• Restores damaged or cracked console areas caused by impact, worn clips, or spills.
• Ideal for workshop replacement jobs and bodyshop refits where OEM-like appearance is required.

Applications

• Peugeot 3008 I (First Generation)
• Peugeot 5008 I (First Generation)

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I; Peugeot 5008 I (First Generation)
• Product Codes: 9685097277, 7591P6
• Other Numbers: T84, T87
• Color: HZE – Tramontane

Fitment And Replacement Guide

Replacement is straightforward for an experienced mechanic or a confident DIYer. Typical procedure:

• Prepare: Park on level ground and ensure good interior lighting. Gather trim tools and a basic screwdriver/Torx set.
• Remove Surrounding Trim: Carefully pry away adjacent trim pieces with a plastic trim tool to avoid scratching surfaces.
• Unscrew And Unclip: Remove visible screws or fasteners and release retaining clips. Work progressively to avoid cracking brittle clip areas.
• Detach Old Panel: Once unclipped, lift the panel clear and disconnect any plug-in elements if present (e.g., illumination modules or accessory sockets).
• Install New Panel: Align locating tabs and press until clips engage. Refit screws and surrounding trim. Verify correct seating and gap alignment.
• Check Functionality: If the panel carries any accessories (illumination, sockets), verify electrical connections before final assembly.

Estimated Fitment Time: 15–40 minutes depending on experience and model variant. Use of a plastic trim pry tool is recommended to protect visible surfaces.

Installation Recommendations

• Always work methodically and avoid excessive force when releasing plastic clips — many failures occur during removal rather than in service.
• Replace any broken or deformed clips to ensure a secure, rattle-free fit. Clip sets are inexpensive and improve long-term fitment.
• Keep fasteners organized during disassembly to ensure correct reassembly and consistent panel alignment.
• If the panel includes electrical parts, disconnect the battery before unplugging connectors only when advised by vehicle-specific procedures.

Why This Part Most Often Fails

• Impact Damage: Kicks, dropped objects, or collisions can crack the panel or break locating tabs.
• Clip And Fastener Fatigue: Repeated removal or brittle aging of plastic clips causes loose fitment and rattles.
• Liquid Spills And Corrosion: Prolonged exposure to moisture or spilled liquids can warp or stain the panel and affect any integrated trim components.
• Wear And Cosmetic Degradation: Scuffs, abrasion from shoes, and UV fading reduce visual appeal and often prompt replacement.

Search Tip: Customers frequently search by part numbers 9685097277 or 7591P6 when sourcing this console panel. Make sure the color code HZE (Tramontane) matches your vehicle’s interior for the best visual match.

Product Description

High-quality exterior mirror trim designed for the left-hand side of Peugeot 3008 I and Peugeot 5008 I. This painted cover (Color EXY – Black Onyx) restores the original appearance after damage or wear and ensures a factory look thanks to its chrome-accented profile. Ideal for professional workshops and DIY enthusiasts who require a direct-fit replacement matching OE styling and finish.

Keywords: Left Mirror Cover, Mirror Cap, Peugeot 3008 Mirror Cover, Peugeot 5008 Mirror Cap, Black Onyx, Part Number 96859483XT, 96859485XY, 9025Z0.

Technical Information

• Manufacturer: Stellantis / Peugeot Citroën
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 96859483XT, 96859485XY, 9025Z0
• Additional Numbers: T84, T87
• Color Code: EXY (Black Onyx)
• Side: Driver’s Side (Left)

Function and Benefits

The mirror trim protects the mirror housing edge, conceals the fastening points and contributes to the vehicle’s aerodynamic and visual integrity. A correct-fit mirror cap prevents water ingress around the mirror base and maintains factory appearance after minor impacts or paint damage.

Replacement Guide

Typical replacement steps for a left external mirror cap on Peugeot 3008 I / 5008 I:

1. Fold the mirror glass inward. If necessary, remove the mirror glass carefully according to vehicle-specific instructions to avoid damaging the heater element or actuator.
2. Use plastic trim tools to gently pry the old cover off by releasing the retaining clips. Work gradually around the perimeter to avoid breaking clips or deforming the housing.
3. Clean mating surfaces and check the condition of clips. Replace any broken clips with OEM-type fasteners for secure fitment.
4. Align the new painted cover and press firmly until all clips engage. Reinstall the mirror glass and test mirror adjustment and heating function.
5. Perform a visual check and road test at low speed to confirm correct fit and absence of vibration.

Installation Recommendations

• Use plastic trim removal tools to avoid scratching paint and trim.
• Replace damaged or weakened clips when fitting the new cover to ensure a secure, rattle-free installation.
• Avoid forcing clips; if resistance is high, verify clip alignment to prevent breakage.
• When mirror glass removal is required, follow manufacturer guidance to prevent damage to the heating element or motors.

Why This Part Most Commonly Fails

Mirror covers are most frequently replaced due to external impact (parking knocks, road debris) or progressive deterioration: UV exposure and temperature cycles can cause paint peeling or fading and make plastic clips brittle. Freezing conditions and improper removal methods can also break retaining clips, necessitating replacement of the entire cover to restore proper fit and appearance.

Fitment Notes

Designed to match OEM styling and paint code EXY (Black Onyx). Verify part numbers when ordering to ensure correct finish and side. The part is intended as a direct exterior trim replacement for the listed models.

Genuine chrome front right mirror cover/guard for Peugeot 3008 I and 5008 I. This is a used OE PSA part in EXY – Black Onyx, suitable for quick replacement of a cracked or missing cover without the need for painting (if you have the same shade). Typical search/order codes: 9025Y8, 96859482XT, 96859484XY.

Key benefits
– Original PSA part = exact fit, identical structure and EXY shade, solid chrome bar
– Quick and clean bodywork fix for the A-pillar above the right fender
– Savings compared to a new part, maintaining the factory appearance

Compatibility
– Peugeot 3008 I (T84), year of manufacture approx. 2009–2016, right side (passenger in cars with left-hand drive)
– Peugeot 5008 I (T87), year of manufacture approx. 2009–2017, right side (passenger in cars with left-hand drive)
– Chrome finish (check if you have the chrome version)

Technical information
– Location: in front of the right wing mirror, above the right fender, at the base of the A-pillar
– Color: EXY – Black Onyx (Noir Onyx)
– Design: with integrated chrome bar
– Material: high-quality plastic (OE specification), surface treatment according to the original
– OE/Part Numbers: 9025Y8 (PSA), Replacement/Alternate Numbers: 96859482XT, 96859484XY
– Condition: used original part; fully functional, the usual minor cosmetic marks from use may occur

Assembly and tips
– Mounting on the original mounts/clips; replacement is usually quick without special tools
– If you are matching the shade, check the color code on the car (EXY). No painting is necessary when matching
– Before ordering, compare shape and part numbers (9025Y8 / 96859482XT / 96859484XY) or verify by VIN

What will that solve?
– Replacement of a cracked or missing cap
– Restoration of appearance and aerodynamics in the area in front of the mirror
– Preservation of the original chrome line of the body

Note
– This part is intended for the right side (passenger for LHD). In the case of a different design (without chrome), choose the corresponding variant.

This high-quality replacement electric window motor is designed for Peugeot 3008 I and 5008 I vehicles and carries OE references 9682808680, 1607674980 and 9224F6. Ideal for professional garages and skilled DIY enthusiasts, the unit restores smooth and reliable rear right window operation, reducing noise and intermittent failures common with worn motors. Compatible with original mounting points and electrical connectors, it provides a cost-effective solution to a stuck or non-responsive rear passenger window.

The unit converts electrical energy into rotational motion that drives the window regulator mechanism. When the switch is operated, the motor turns the regulator gear or spool, raising or lowering the glass. Typical faults include electrical brush wear, gear damage or water ingress that affects the motor and contacts.

Installation Recommendations

• Prepare Tools: Trim panel tools, Torx/Screwdrivers, socket set and a multimeter for quick checks.
• Safety First: Disconnect the battery before starting work to avoid short circuits and accidental airbag deployment.
• Support The Glass: Secure the window glass in the up or down position with tape or a support to prevent it falling when the motor/regulator is removed.
• Remove Door Trim: Carefully detach door card, unplug electrical connectors for switches and speakers, and remove the moisture barrier if present.
• Unbolt The Motor/Regulator: Remove fasteners holding the motor and regulator assembly, disconnect the electrical connector and extract the unit from the door cavity.
• Fitment: Transfer any required mounting brackets or bolts from the old unit if applicable, fit the new motor, reconnect the plug and temporarily reconnect the battery to test function before fully reassembling the door.
• Final Checks: Verify smooth travel of the window across the full range, adjust glass alignment if necessary, re-fit the door trim and perform a final functional test.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I; Peugeot 5008 I
• Product Codes: 9682808680
• Additional Numbers: 1607674980; 9224F6
• Application: Right Rear Passenger Side Electric Window Motor

Why This Part Most Often Fails

• Water Ingress: Moisture entering the door cavity corrodes electrical contacts and brushes, accelerating failure.
• Wear Of Brushes/Commutator: Normal operation causes wear of internal brushes and commutator, leading to intermittent or no movement.
• Mechanical Damage: Stripped gears, broken teeth or worn regulator components can overload the motor and cause it to stall.
• Contamination And Lack Of Lubrication: Dirt and dried grease increase friction on tracks and cables, putting extra load on the motor.
• Frequent Use And Age: High cycle use over several years increases the likelihood of failure compared to lightly used vehicles.

Practical Tips: Always check the condition of the regulator mechanism and guide rails when replacing the motor. Clean and lubricate tracks, replace worn clips or cables, and verify electrical supply and grounding if intermittent operation is observed. Test the new motor before refitting the door card to ensure correct installation.