This complete instrument cluster is a direct-fit replacement suitable for workshop fitting or DIY installation. It provides speedometer, tachometer, fuel gauge and warning indicators in one unit and is commonly referenced by product numbers, making it easy to find when searching parts catalogs or online. The unit is ideal for mechanics and experienced enthusiasts working on Citroën C2/C3 models with the 1.4 HDi engine.

Key Benefits

• Direct replacement for original equipment SAGEM clusters—matching mounting points and electrical connectors.
• Commonly searched by part numbers, improving findability: 9652008280, P9652008280, 6105EV.
• Saves diagnostic time by restoring all instrument functions in a single swap.

Fitment And Models

Compatible With: Citroën C2; Citroën C3; Citroën C3 Pluriel (1.4 HDi applications). Verify model year and engine type against the part numbers where possible to ensure exact fitment.

Function And Symptoms Of Failure

The instrument cluster displays vehicle speed, engine rpm, fuel level and several warning lights. Common symptoms indicating a faulty cluster include blank or partially lit displays, erratic or stuck needles, non‑functioning odometer, or intermittent warning lights. Failures are often electrical in nature rather than mechanical.

Why The Part Fails

• Electrical Stress: Voltage spikes or poor battery/alternator regulation can damage onboard electronics.
• Wear And Tear: Stepper motors and backlighting age over time and may lose precision or fail.
• Environmental Damage: Moisture ingress or corrosion on connector pins leads to intermittent faults.
• PCB Or Component Faults: Cracked solder joints or failed components on the circuit board may cause loss of function.

Replacement Procedure (Overview)

• Disconnect Battery: Always isolate the battery negative terminal before starting to avoid short circuits.
• Remove Trim: Carefully remove dashboard trim and fasteners around the cluster to access mounting screws.
• Unscrew Cluster: Remove the retaining screws and gently pull the cluster forward.
• Disconnect Electrical Connectors: Release locking tabs and unplug all connectors; note cable positions for reassembly.
• Install New Cluster: Reconnect connectors, secure the cluster with screws and refit trim.
• Test Before Reassembly: Reconnect the battery and verify gauges, warning lights and odometer operation before finishing reassembly.
• Diagnostic Programming: In some vehicles, an instrument cluster replacement may require coding or synchronization with vehicle systems using dealer-level diagnostic tools (e.g., Diagbox/Lexia) to ensure correct immobilizer and mileage reporting.

Installation Recommendations

• Use Proper Tools: Plastic trim tools reduce the risk of breaking dashboard clips and trim.
• Handle With Care: Avoid touching circuit board components and connector pins; static discharge precautions are recommended.
• Check Power Supply: Verify battery voltage and charging system health before declaring a new cluster faulty.
• Document Mileage: Record the odometer reading prior to removal for workshop records; some markets require mileage retention procedures.

Technical Information

• Manufacturer: SAGEM
• Model: Combination Instrument Cluster (for Citroën C2 / C3 1.4 HDi)
• Product Codes: 9652008280; P9652008280
• Other Numbers: 6105EV

Note: This unit was removed from a vehicle with approximately 350,000 km. Sold as a used complete instrument cluster suitable for professional fitting or competent DIY installation.

This full instrument cluster is a direct-fit replacement unit commonly referenced by part numbers 9652008280, P9652008280 and 6105EV. Designed for Citroën C2 and C3 models with the 1.4 HDi engine, it is particularly relevant for professional mechanics and experienced DIYers who search by product code when sourcing electrical and dashboard components. The listing includes the exact codes stamped on the unit to help you find the correct match for your vehicle.

The instrument cluster provides essential driver information: vehicle speed, odometer/trip mileage, fuel level, engine warning indicators and other status lights. As a combined unit it houses both mechanical stepper motors for gauges and electronic modules for the display and warning lamp logic, integrating with the vehicle’s electrical network.

How To Replace

• Prepare: Park on a level surface, switch off ignition and remove key.
• Safety: Disconnect the negative terminal of the battery to avoid short circuits and airbag/airbag wiring issues.
• Access: Remove the trim bezel around the dashboard cluster—typically secured with clips and a few screws. Keep fasteners organized.
• Unplug: Unscrew the instrument cluster, carefully tilt it forward and unplug the multi-pin connectors. Note connector orientation and any locking tabs.
• Swap: Install the replacement unit, reconnect plugs and secure the cluster with its screws. Refit trim bezel.
• Verify: Reconnect the battery, start the vehicle and check all gauges, warning lights and odometer readout for correct function. If any warning lights remain or communications errors appear, perform electrical diagnostics on related circuits and fuses.

Installation Recommendations

• Use Proper Tools: Trim tools and a small Torx set reduce damage to dashboard plastics and fasteners.
• Battery Disconnection: Always disconnect the negative battery terminal before unplugging the cluster to protect vehicle electronics and prevent short circuits.
• Cable Care: Inspect connectors and wiring for corrosion or damaged pins; clean contacts if necessary before reassembly.
• Static Precautions: Avoid static discharge when handling the electronic module. Ground yourself or work on an anti-static mat if available.
• After Installation: Confirm odometer and trip counters are functioning and compare display behavior to the original unit to ensure proper fitment.

Common Failure Reasons

Instrument clusters on older Citroën C2/C3 models typically fail due to a few recurring causes: internal solder joint cracks from thermal cycling, worn or stuck stepper motors causing inaccurate needle movement, LCD or segment failure in the display, water ingress or moisture damage behind the dashboard, and corrosion on connector pins. Electrical surges or intermittent vehicle wiring faults can also damage the cluster electronics. Recognizing the failure pattern (flickering display, stuck needles, or partial/blank readouts) helps direct effective repair or replacement.

Technical Information

• Manufacturer: SAGEM
• Model: Citroën C2; Citroën C3; Citroën C3 Pluriel (1.4 HDi)
• Product Codes: 9652008280; P9652008280; 6105EV
• Additional Numbers: H 01; Mileage On Unit: 242000 km

Part numbers and revision codes printed on the housing are the most reliable way to confirm fitment. This listing highlights the exact codes found on the unit to help mechanics and knowledgeable DIYers locate the correct replacement quickly.