Right wing mirror Citroën Xsara Picasso – original used part PSA 8149.NJ (8149NJ). Complete right-hand mirror for the passenger side, electrically controlled and with an integrated outside temperature sensor. The ideal choice for quick and reliable replacement without modifications – it fits exactly, preserves the original appearance and functions and saves costs compared to a new part.

Main features
– OE/PSA number: 8149.NJ (8149NJ)
– Designed for: Citroën Xsara Picasso (N68)
– Side: right (passenger)
– Control: electric glass adjustment
– Equipment: integrated outdoor temperature sensor
– Wiring: 7 wires (7pin)
– Design: complete mirror (body, arm, glass, wiring; cover according to current photos)
– Condition: used part, fully functional; may bear minor cosmetic scratches consistent with use

Compatibility
– Citroën Xsara Picasso, approx. 1999–2010 (various engines and equipment)
– We recommend to check against OE number 8149.NJ and compare the number of wires/connector with your original mirror.
– Version with temperature sensor – if your car does not have a sensor, please check compatibility before purchase.

Technical notes for assembly
– Standard attachment for Xsara Picasso; installation without the need to modify the bodywork.
– The number of pins (7) must correspond to the installation in the car; check the shape and fitting of the connector according to the photos.
– The color of the cover may differ from the color of your car; possibly the cover can be repainted or replaced with your own.

Why choose this part?
– Original PSA quality and exact fit
– Fully tested functionality (electric control, temperature sensor communication)
– Economical and ecological variant compared to the new part

Search terms
– Right wing mirror Citroen Xsara Picasso
– Passenger mirror Xsara Picasso 8149.NJ
– OEM/PSA: 8149NJ, 8149.NJ, right electric mirror with temperature sensor

Note: This is a used original part. Please refer to photos and description for condition and finish; functionally fine, cosmetic traces from use possible. Verify that the OE number and connector match your car.

Product Overview

High-mounted third brake light (center high mount stop lamp, CHMSL) designed for Citroën Xsara Picasso. This original-equipment replacement part restores rear signalling visibility and safety after a damaged or non-functioning rear centre lamp. Commonly searched by part numbers 6351Y2, 6351ER and 6351L0, the unit is suitable for mechanics and experienced DIY installers looking for a direct-fit solution.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën Xsara Picasso
• Product Codes: 6351Y2, 6351ER, 6351L0
• Other Numbers: (N68), 6351.ER, 6351.L0, 6351.Y2, 6351ER, 6351L0, 6351Y2

Fitment And Compatibility

This third brake light is intended as a direct replacement for the centre brake lamp used on Citroën Xsara Picasso models. It is frequently referenced by its OE part codes (listed above), so customers often locate it using those numbers. Confirm visual match with the existing unit and connector type before installation to ensure proper fitment.

How It Works And Typical Failure Modes

The centre high-mounted brake lamp provides an additional, elevated brake signal to improve visibility for trailing drivers and reduce rear-end collision risk. Failure modes include bulb or LED element burnout, water ingress leading to corrosion, cracked or damaged lens, degraded seals, and wiring/connector faults. Environmental exposure and physical impact are the most common causes of damage.

Replacement Frequency

Longevity depends on technology and vehicle use: LED-based units typically last many years, while incandescent lamp assemblies may require replacement more often as bulbs age or wiring corrodes. Replace the unit immediately if the lamp does not illuminate reliably, if condensation is present inside the lens, or if the housing is visibly cracked.

Installation Recommendations

• Work Recommended For: Professional Auto Technicians Or Skilled DIYers.
• Tools Typically Required: Trim removal tools, Torx or Phillips screwdriver set, socket set, and electrical contact cleaner.
• Procedure Overview: Remove interior tailgate trim to access the lamp assembly; unfasten retaining screws or clips; carefully unplug the electrical connector; remove the old unit and fit the replacement; reconnect the plug and secure the assembly; reassemble trim and test function.
• Safety Advice: Disconnect the vehicle battery before beginning work to avoid short circuits and accidental activation. Take care with interior trim clips to avoid breakage.
• Post-Installation: Verify Brake Light, Parking Light (if integrated), And Hazard Light Operation From Both Manual Brake Application And Bulb/LED Self-Check If Available.

Why This Part Is Replaced

Technicians most often replace the third brake light because of water ingress causing corrosion, physical damage from impacts or lifted tailgate objects, failed bulbs or LED modules, and connector corrosion leading to intermittent operation. Addressing underlying sealing or wiring issues at the same time prevents repeat failures.

Search Tips

For quick results in parts catalogs or online stores, search by OE part numbers 6351Y2, 6351ER or 6351L0. Including the vehicle model name “Xsara Picasso” in the search increases accuracy when matching fitment and connector type.

This genuine used exterior mirror is a direct-fit replacement for Citroën Xsara Picasso models equipped with electric mirror adjustment and an external temperature sensor. Ideal for mechanics and DIY enthusiasts who search by product code, the unit preserves original mounting points and electrical connections for straightforward installation. The grey metallic finish (EZRC) matches factory paint tones and the 7-wire connector supports mirror adjustment and sensor signals. As a used component it offers cost-effective restoration of functionality while maintaining original equipment characteristics.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Xsara Picasso
• Product Codes: 96570955XT, 96570985XT, 815351
• Additional Numbers: EZRC, (N68)

Compatibility

Directly Fits: Citroën Xsara Picasso models with electric mirrors and 7-wire connector layouts. Confirm compatibility by matching the product codes listed above with the mirror on the vehicle.

Function

The Mirror Provides Electric Adjustment And Includes An External Temperature Sensor. It Retains The Original Mounting Interface And Wiring Harness For Seamless Integration With Door Electronics. The Unit Restores Mirror Positioning And Temperature Sensing Functions Used By The Vehicle Systems.

Installation Recommendations

• Disconnect The Battery Before Starting Work To Avoid Short Circuits Or Damage To Vehicle Electronics.
• Remove Inner Door Trim Carefully To Access Mirror Fasteners And Electrical Connector; Use Trim Tools To Prevent Damage.
• Disconnect The Mirror Wiring Harness And Unbolt The Mirror From The Door (Typically 3 Fasteners).
• Transfer Any Components Required From The Old Unit (For Example Mirror Glass Or Cover) If They Are Not Included With The Replacement.
• Fit The New Mirror, Tighten Fasteners To Manufacturer Torque Where Available, Reconnect The Wiring And Refit The Door Trim.
• After Installation, Reconnect The Battery And Test All Functions: Electric Adjustment, Temperature Sensor Signal (If Applicable), And Any Integrated Heating Or Folding Functions.
• Inspect Wiring Loom At The Door Hinge For Fatigue Or Breaks; Replace Damaged Clips Or Grommets To Prevent Future Wire Chafing.

Most Common Reasons For Failure

• Impact Damage From Collisions Or Scrapes Causing Broken Mounts, Cracked Glass, Or Bent Housing.
• Water Ingress And Corrosion Around Electrical Contacts Resulting In Intermittent Or Lost Function.
• Wiring Fatigue At The Door Hinge Area Leading To Broken Or Shorted Wires (Especially On Vehicles With High Door Use).
• Wear Of Internal Adjustment Motor Mechanisms After Many Years Of Use.
• Failure Of The Temperature Sensor Due To Moisture Or Contamination.

This Used Mirror Is A Practical Choice To Restore Functionality And Appearance On Citroën Xsara Picasso Vehicles While Keeping Replacement Costs Down. Always Follow Safe Working Practices And Manufacturer Guidelines During Installation.

Genuine used PSA part – fuel tank cover/door for Citroën Xsara Picasso. An ideal replacement for a cracked or broken door; assembly is quick and without modifications, replacement piece by piece.

Key OEM numbers for lookup and verification
– 9631275877
– 151780
– Color marking: KNAC / KNA – GRILYNE paint (painted part in the original shade; for an exact match, compare the paint code with the car’s VIN plate)

Compatibility
– Citroën Xsara Picasso (N68), approx. 1999–2012
– Fits all engines and equipment of this model with the same type of attachment

Technical information
– Part type: tank cap cover (fuel tank door), not screw cap
– Material: plastic, front painted
– Mounting: on the original hinge/holder in the mudguard; locking latch as per serial part
– Surface: original PSA paint (shade according to KNAC/KNA code)
– Condition: used part, there may be minor cosmetic marks from use; functional – see product photos for condition and possible scratches

Why choose this part?
– PSA original – exact geometry, correct radius and joints, no need for fine-tuning
– Quick installation without programming and without interventions in the bodywork
– You will maintain a uniform shade of paint (if the color code matches), often without the need for painting

Assembly tips
– Before assembly, compare the shape of the strap and latch with the original part
– Check the paint code on the vehicle plate; KNAC/KNA should match your shade
– When transferring from original part, check the spring/stop (if included in your design)

Search Terms (SEO)
– Citroën Xsara Picasso tank door
– Xsara Picasso KNAC KNA tank cap cover
– Citroen fuel tank cover 9631275877, 151780
– tank cap cover Citroën Xsara Picasso

Note: Always verify the OEM number and paint code match your car before ordering. The contents of the package correspond to the photos in the menu.

Product Overview

High-quality replacement bulb holder with a short length of wiring designed for the left rear tail lamp of the Citroën Xsara Picasso. This direct-fit part is often searched by product codes 6350N0, 6350T2 or 9631564080 and is ideal for professional workshops and DIY mechanics looking for a reliable lamp socket assembly for brake/taillight and indicator applications.

Features And Function

• Designed To Hold P21/5W Combination Bulbs For Brake And Tail Functions.
• Includes Short Wiring Pigtail For Easier Replacement Without Splicing The Main Harness.
• Standard 2/3-Pin Socket Configuration Depending On Application, With Push/Turn Or Clip-In Mounting.
• Plastic Body With Metal Contact Terminals To Ensure Electrical Connection Between Bulb And Vehicle Wiring.

Compatibility

Fits Citroën Xsara Picasso rear left tail light assemblies where the original part numbers 6350N0 / 6350T2 / 9631564080 are specified. Check the lamp type and socket shape on the vehicle to confirm fitment before installation.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën Xsara Picasso
• Product Codes: 6350N0, 6350T2, 9631564080
• Additional Numbers: (N68), 6350.N0, 6350.T2, 6350N0, 6350T2, 9631564080, P21/5W

Installation Recommendations

• Disconnect Battery Before Starting Work To Avoid Short Circuits And Accidental Bulb Activation.
• Access The Rear Lamp From Inside The Boot Or By Removing The Lamp Assembly According To Vehicle Instructions.
• Remove The Old Socket By Unplugging The Connector And Releasing Any Clips Or Screws Holding The Holder In Place.
• Compare New Socket With Old One For Pin Layout And Bulb Type. Transfer Any Rubber Seals If Required.
• Install The New Socket By Securing Clips/Screws, Plugging In The Connector And Fitting The Correct Bulb Type (P21/5W Where Applicable).
• Use Dielectric Grease On Contacts To Reduce Corrosion Risk And Ensure A Reliable Connection.
• Test All Light Functions Before Reassembling Trim Panels.
• If Wiring Is Damaged, Repair With Proper Automotive Connectors Or SOLDER And HEAT-SHRINK, Do Not Rely On Twist Connectors For Long-Term Repair.

Why This Part Commonly Fails

• Corrosion On Metal Contacts Caused By Moisture Ingress Leading To Intermittent Or Lost Electrical Contact.
• Heat Damage From Overloaded Bulbs Or Poor Contact Causing Plastic To Deform Or Melt.
• Mechanical Fatigue And Vibration Leading To Broken Clips Or Cracked Socket Housings On Older Cars.
• Abrasion Or Insulation Damage To The Wiring Causing Short Circuits Or Open Circuits.
• Failure Frequency Depends On Vehicle Age And Environmental Exposure; Salt, Road Debris And Repeated Bulb Changes Increase Failure Likelihood.

Additional Notes

This socket assembly is supplied without bulbs. When replacing, fit the correct bulb type and check the lamp lens and seals to prevent future moisture-related failures. Suitable for professional fitment or competent DIY installation following standard automotive safety practices.

High-quality replacement passenger airbag designed for Citroën Xsara Picasso vehicles. This airbag assembly matches factory fitment and carries the commonly searched part numbers used by mechanics and DIY enthusiasts, making it easy to find and verify compatibility. The unit is intended as a direct replacement for a deployed or damaged passenger airbag, restoring full frontal occupant protection when correctly installed and diagnosed.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Xsara Picasso
• Product Codes: 9631316180, 8216A1
• Other Numbers: 8216.A1, NFP, (N68)

Function and Application

The passenger airbag is a primary component of the Supplemental Restraint System (SRS). In the event of a significant frontal impact, the airbag inflates rapidly to cushion the passenger, reducing the risk of head and chest injuries. This module is fitted into the dashboard on the passenger side and works together with seat belts, seatbelt pretensioners, and the vehicle’s central airbag control unit to provide occupant protection.

Signs Of Fault Or When Replacement Is Required

• Airbag Warning Light (SRS) illuminated after a collision or electrical fault.
• Visible damage to the dashboard, deployment residue, or a known previous deployment.
• Corroded or damaged connectors at the airbag harness or mounting area.
• After an accident where the airbag deployed, the module must be replaced.

Common Causes Of Failure

• Deployment during a crash – airbags are single-use components and must be replaced after activation.
• Electrical Issues – damaged wiring, poor connectors, or corrosion can interrupt the squib circuit and trigger faults.
• Impact Or Physical Damage To The Module Or Dashboard Area.
• Environmental Damage – moisture ingress or contamination affecting connectors and contacts.

Installation Recommendations

Installation of an airbag is safety-critical. Follow these guidelines:

• Always Disconnect The Vehicle Battery Before Starting Work And Wait At Least 10 Minutes To Allow The SRS Capacitor To Discharge.
• Use Appropriate Tools And Follow The Manufacturer’s Removal/Mounting Sequence—remove glovebox or trim panels as required to access the module.
• Disconnect The Airbag Connector Carefully; Do Not Pull On Wires—use the correct release tab or locking mechanism.
• Fit The New Module And Secure All Fasteners To The Manufacturer’s Specified Torque Values.
• After Installation, Use A Diagnostic Tool To Clear SRS Fault Codes And Confirm That The Airbag Warning Lamp Goes Out.
• If Any SRS Fault Persists, Recheck Connectors, Wiring And Diagnosis Before Returning The Vehicle To Service.

Recommended For Who

Intended For Professional Auto Technicians And Experienced DIYers Familiar With SRS Systems. This part is often searched by part number (e.g., 9631316180, 8216A1), so keeping these references handy speeds up identification and ordering.

Why This Part Adds Value

Provides direct-fit replacement using manufacturer part references, restoring original passive safety performance. Clear product codes in the listing help technicians locate the correct item quickly in parts catalogs and diagnostic systems.

Important Safety Notice

Airbags Are Safety Devices. Incorrect Handling Or Installation Can Cause Injury Or System Malfunction. If You Are Not Fully Confident In Performing The Replacement And Diagnostic Checks, Have The Work Carried Out By A Qualified Technician.

Product Overview

High-quality Rear Right Tail Light designed as an original Citroën replacement for the Xsara Picasso (models produced up to 2004). This passenger-side combination lamp restores the correct rear lighting functions and appearance after damage or wear. Ideal for professional garages and DIY mechanics who need a direct-fit, OEM-style unit identified frequently by part numbers 9631563980 and 6351N0.

Key Features

• Direct Fit For Passenger Side: Designed to match the mounting points and connector layout of Citroën Xsara Picasso (up to 2004).
• OEM Quality: Marketed as an original Citroën unit, ensuring correct lens geometry, reflector position and finish.
• Combination Lamp Functionality: Provides Rear Position (Tail), Brake and Turn Signal lighting in a single assembly; may also include reverse or fog lamp depending on vehicle variant.
• Simple Replacement: Bolt-on design with a plug-in electrical connector for straightforward installation in workshop or home settings.
• Searchable By Part Number: Frequently listed and searched using codes 9631563980 and 6351N0—useful for quick identification.

How It Works And Typical Applications

This rear right lamp is a combination unit that houses the rear position (tail) lamp, stop (brake) lamp and direction indicator. When fitted to the vehicle it ensures compliance with rear lighting functions and optical alignment so other road users can clearly see braking and turning signals. It is suitable for Xsara Picasso models produced until 2004 and intended as a replacement for damaged or non-functioning original rear-right lamps.

Installation Guide

Recommended For Trained Mechanics And Competent DIYers:

• Open The Tailgate/Boot And Remove Interior Trim To Access Lamp Fasteners.
• Unscrew The Mounting Bolts And Carefully Pull The Lamp Assembly Outwards From The Body.
• Disconnect The Electrical Connector By Releasing The Locking Clip, Then Remove The Lamp Assembly.
• Install The New Lamp By Plugging In The Connector, Seating The Lamp Correctly And Replacing The Mounting Bolts.
• Test All Light Functions (Tail, Brake, Indicator And Reverse If Applicable) Before Reinstalling Trim.

Always Follow Common-Sense Safety Procedures: Disconnecting the battery is recommended when working on vehicle electrics to reduce risk of short circuits. Tighten fasteners to manufacturer torque where available and check the lamp alignment after installation.

Technical Information

• Manufacturer: Citroën
• Model: Citroën Xsara Picasso (Up To 2004)
• Product Codes: 9631563980, 6351N0
• Additional Numbers: (6351.N0), (N68)

Recommendations For Mounting

• Inspect The Connector And Wiring For Corrosion Or Damage Before Fitting The New Lamp.
• Replace Bulbs As Necessary With Correct Types Specified In The Vehicle Manual; If Reusing Old Bulbs, Check Sockets For Corrosion.
• Ensure Sealing Surfaces Are Clean And Free Of Old Sealant To Prevent Water Ingress.
• After Installation, Verify That All Light Functions Operate Correctly And That The Lens Sits Flush With The Bodywork.

Why This Part Typically Fails

• Bulb Burnout: The most common cause of apparent lamp failure—individual bulbs within the assembly reach end of life.
• Water Ingress And Condensation: Cracked lenses or degraded seals allow moisture into the housing, causing corrosion of contacts and premature failure.
• Impact Damage: Rear collisions or knocks can crack the lens or break mountings, necessitating lamp replacement.
• Connector Corrosion Or Wiring Faults: Corroded pins or damaged wiring can cause intermittent operation or full failure of one or more lamp functions.

Who Should Fit This Part

Suitable For Professional Auto Technicians And Experienced DIY Enthusiasts. If You Are Unsure About Electrical Work Or Lamp Alignment, Seek Assistance From A Qualified Workshop.

Description

This electric central locking latch is a direct-fit replacement for the left front (driver’s) door on the Citroën Xsara Picasso. Designed to restore reliable locking and unlocking via the central locking system, it is suitable for professional workshops and DIY mechanics who need a robust OEM-compatible part. Common search terms include Citroën Xsara Picasso door lock, left front door lock, central locking actuator, and part number 9135H5.

Function And Symptoms

The unit controls mechanical locking and provides electrical feedback to the central locking system. Faulty locks typically produce symptoms such as: door failing to lock or unlock with remote or central control, intermittent operation, audible grinding or clicking inside the door, or inability to secure the vehicle from the driver side. Electrical faults or broken internal levers prevent proper operation of the latch.

Fitment

Intended For: Citroën Xsara Picasso (Left Front / Driver’s Door). Check the vehicle model and door position when ordering. Many customers search by the product code 9135H5.

Replacement Procedure

Basic replacement steps for a competent mechanic or experienced DIYer:

• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Unintended Electrical Operation.
• Remove The Interior Door Trim Panel And Any Moisture Barriers To Access The Lock Assembly.
• Disconnect The Electrical Connector From The Lock And Detach Control Rods/Linkages From The Mechanism.
• Unscrew The Fastening Bolts And Extract The Old Lock From Inside The Door Shell.
• Install The New Lock, Reattach Rods/Linkages In The Correct Positions, Reconnect The Electrical Connector And Test Locking/Unlocking Before Reassembling The Door Trim.
• Ensure Proper Adjustment Of Linkages And Lubricate Moving Parts If Needed.

Installation Recommendations

Use appropriate trim tools to avoid damage to clips and panels. Test the new lock operation with the door open and the battery connected before fitting the trim. Check connector pins for corrosion and clean contact surfaces. If the door has suffered water ingress, inspect and renew the inner water barrier to prevent premature failure. Tighten mounting bolts to manufacturer torque where available.

Common Failure Reasons

Door locks fail most often due to a combination of mechanical wear and environmental factors: prolonged exposure to moisture leading to corrosion, ingress of dirt and grit, worn or broken internal levers and microswitches, degraded electrical contacts, and physical damage to linkage rods. Frequent remote operation and aging can accelerate wear of the actuator and internal gears.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën Xsara Picasso (Left Front / Driver’s Door)
• Product Codes: 9135H5, 9135.H5
• Additional Numbers: (N68), NFP

Note For Professionals

This part is commonly searched by its product code. When fitting, verify mechanical linkage positions and electrical connector pin condition. Replace any damaged retaining clips or water seals to ensure long-term reliability.

Tailgate handle (fifth door handle) with microswitch for Citroën Xsara Picasso. An original PSA part, suitable for cars up to the year of manufacture 2005. An ideal replacement for a cracked or non-functional trunk handle – it will retain the original appearance and the correct function of the lock release.

Main advantages
– Original PSA (Citroën/Peugeot), NFP – no longer produced, suitable as a replacement in OE quality
– Integrated trunk lid release microswitch
– FZL color – Ouragan Gray (FZL), matches the original bodywork
– Direct mounting on the original attachment, without modifications

Technical information
– Location: tailgate/fifth door – outer handle with button (microswitch)
– Functions: mechanical grip of the lid + electric switching of the trunk lock
– Electrics: microswitch connector (depending on the car equipment, 2pin)
– Material: durable plastic, surface in FZL shade (Ouragan Grey)
– Condition: used original part (OE), visual wear corresponds to age; fully suitable for further use
– Delivery: usually without mounting screws and license plate light bulbs (you can change from the original part)

Compatibility
– Citroën Xsara Picasso (N68), model years approx. 1999–2005
– Fits cars up to facelift/part change in 2005. We recommend checking against OE number or VIN before ordering.

OE/product numbers to search
– 9635595877 (PSA)
– 874293 (PSA)
– 6554F2 / 6554.F2 (PSA)
– Keywords: Xsara Picasso trunk handle, tailgate handle, tailgate handle, trunk button, Citroën trunk switch, OE 9635595877, 874293, 6554F2

Color
– FZL – Gray Ouragan

Assembly tips
– Before assembly, clean and lubricate the lid lock mechanism; check the wiring gland seal for leaks.
– Check the match of the microswitch connector; older pieces may vary in bundle shape or length.
– Tighten the screws carefully to avoid cracking the plastic.

How to verify the correct part
– Compare the OE numbers on your original part with the listed 9635595877 / 874293 / 6554F2.
– Alternatively, send us the VIN of the car, we will check compatibility for you.

Note
– NFP (No Further Production) – the part is no longer produced as new; this original used piece is an ideal choice to preserve its original condition and function.

Original double air conditioning pipe (coolant line) for Citroën Xsara Picasso 1.6 8V petrol. This is a used PSA OEM part, ideal for professional air conditioning repair and home service. Wanted OE number: 6460SP / 6460.SP and replacement 6460LR / 6460.LR. The part is listed in the PSA catalog as NFP (No Further Production – no longer produced), therefore the original from secondary production is difficult to obtain.

Key features and functions
– Type: double climate pipe – high-pressure discharge branch + low-pressure suction branch
– Purpose: connecting the compressor with the condenser and the evaporator (R134a refrigerant line)
– Construction: aluminum pipe with original PSA flanges/quick couplings
– Seals: O-rings (a new mounting kit is always recommended)
– Condition: used original part, functional unit, normal signs of use; the tightness of the O-rings is not guaranteed – they are replaced with new ones as standard

Compatibility
– Vehicle: Citroën Xsara Picasso (N68)
– Engine: 1.6 8V petrol (1.6 i)
– Years of production: approximately 1999–2010
– OE numbers: 6460SP, 6460.SP, 6460LR, 6460.LR (PSA Citroën/Peugeot)
Note: If you are not sure about compatibility, send the VIN – we will verify the correctness of the part before ordering.

Why choose this part?
– Original PSA design = exact seating surfaces and dimensions, no modifications during assembly
– NFP part: the new one is no longer produced, the used original is the most reliable way to fully function the air conditioning
– A quick way to eliminate a refrigerant leak or to restore pressure in the system without making a replacement pipe

Assembly recommendations for mechanics
– Always replace the O-rings with new ones and lightly coat them with suitable PAG oil
– Check and clean the seating surfaces, do not damage the flanges and locking clips
– After assembly, perform a vacuum and pressure leak test; only then fill with R134a according to the manufacturer’s specification
– In the case of an open system, it is recommended to replace the dryer
– Tighten according to the manufacturer’s torques, prevent twisting of the pipes in the holders

Typical symptoms of a faulty pipe that this part addresses
– Coolant leakage (greasy maps, green UV traces at joints)
– Failure to maintain pressure in the system, frequent shutdown of the compressor
– Rusted or cracked aluminum pipes, damaged flanges

Are you searching by code 6460SP or 6460Z9? This is the correct original air conditioning line for the Xsara Picasso 1.6 8V. If you have a question about assembly or compatibility verification, let us know – we’ll be happy to help.