Multifunction Stalk Switch Designed For Workshop And DIY Use. This COM2008P steering column module provides direct control of lighting, indicators, wipers and on-board computer functions. Ideal for mechanics and experienced car owners who need a reliable replacement part for Citroën and Peugeot models, it is frequently searched by OEM references and product codes (see Technical Information). Clear mechanical actuation and integrated electrical contacts ensure precise signal input for vehicle safety and convenience systems.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II; Peugeot 508; DS4; DS5
• Product Codes: 96759249XT; 98000200ZD
• Other Numbers: COM2008; 6243C4

Installation Recommendations

Work Should Be Carried Out By A Qualified Technician Or An Experienced DIYer With Basic Tools. Follow These Steps:

• Disconnect The Negative Battery Terminal And Wait A Few Minutes To Minimize Airbag Deployment Risk.
• Remove Steering Column Covers And, If Required By Vehicle Design, The Steering Wheel Or Airbag Module Following Manufacturer Safety Procedures.
• Unplug The Multi-Pin Connector From The Old Stalk Assembly And Unscrew Any Retaining Clips Or Fasteners.
• Fit The New COM2008P Stalk, Ensure Connectors Are Correctly Seated And Locking Tabs Are Engaged.
• Reassemble Covers, Reconnect Battery, And Verify All Functions: Indicators, Headlights, Fog Lights, Wipers (Front And Rear), Horn And Trip Computer Controls.
• If Any Function Fails After Installation, Recheck Connector Integrity And Wiring For Corrosion Or Broken Pins.

Most Common Failure Reasons

• Wear Of Internal Contacts Due To High Mileage, Causing Intermittent Or Non-Functioning Signals.
• Moisture Ingress Or Corrosion In Electrical Connectors, Leading To Faulty Operation.
• Mechanical Breakage Of Plastic Levers Or Retaining Tabs From Repeated Use Or Forceful Operation.
• Faulty Solder Joints Or Internal Switch Mechanisms Causing Intermittent Electrical Contact.

Search Tip: This Part Is Often Listed Under References 96759249XT, 98000200ZD, COM2008 Or 6243C4 — Entering Any Of These Codes Speeds Up Finding The Correct Item In Catalogs.

Overview

Multifunction Steering-Column Stalks (COM2008) designed for Peugeot 407 provide reliable control of vehicle lighting, wipers, cruise system and in-cabin convenience functions from behind the steering wheel. This replacement stalk assembly restores ergonomic, factory-style switching for workshops and DIY mechanics who need a direct-fit part referenced under common product codes.

Key Features And Benefits

• Multifunction Design: Single compact unit controls headlights, fog lights, wipers (front and rear), rain sensor input, cruise control and radio interface where applicable.
• Direct Fit: Manufactured to match original mounting points and electrical connectors for straightforward replacement on compatible Peugeot 407 vehicles.
• Improved Driveability: Restores proper control of safety-related systems (lights, wipers, ESP inputs), reducing driver distraction and improving road safety.
• OEM Cross-Reference Numbers Included: Easier identification for technicians searching by part number.
• SEO-Friendly Identification: Commonly searched under COM2008, 96663607XT, 6242NA, 96773906ZD and related codes.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 407
• Product Codes: 96663607XT, 6242NA, COM2008
• Additional Numbers: 96773906ZD

Compatibility And Applications

Intended For Peugeot 407 models. Ideal For Automechanics And Enthusiasts Performing Steering-Column Service Or Restoring Malfunctioning Switchgear. Use The Product Codes Above When Searching Catalogs Or Ordering Replacement Units.

Installation Recommendations

• Safety First: Disconnect The Battery And Wait Sufficient Time Before Starting Work To Prevent Airbag Deployment. Follow The Vehicle Manufacturer’s Safety Procedures When Working Around The Steering Column.
• Removal Steps: Remove Steering-Column Trim Covers To Access The Stalk Assembly, Disconnect Electrical Connectors Carefully, And Unfasten Mounting Screws Or Clips Holding The Stalk Unit.
• Fitting Steps: Position The New Stalk Unit, Reconnect All Plugs Ensuring Secure Pins, Reassemble Trim, Reconnect The Battery And Verify All Functions (Lights, Indicators, Wipers, Cruise Control, Rain Sensor, ESP Signals) Before Final Reassembly.
• Estimated Time: Typically 30–90 Minutes Depending On Experience And Tools Available.
• Testing: Check All Switch Functions And Electronic Messages On The Dashboard After Installation To Confirm Correct Operation.

Why This Part Fails Most Often

Common Causes Of Failure Include Mechanical Wear Of Internal Switch Contacts, Contamination Or Corrosion From Moisture Ingress, Broken Or Worn Lever Mechanisms Due To Frequent Use, And Electrical Failures From Short Circuits Or Connector Damage. Symptoms Of A Faulty Stalk Include Intermittent Lighting, Non-Working Wipers, Loss Of Cruise Control, Fault Codes Related To Steering-Column Inputs, Or Physical Play/Inconsistent Switch Operation.

Practical Tips For Mechanics

• When Replacing The Stalk, Inspect Related Wiring Harnesses And Connectors For Corrosion; Repair Any Damaged Pins To Prevent Recurrence.
• Keep Part Numbers To Hand For Quick Cross-Reference In Parts Catalogs And When Ordering Replacement Units.
• Where Possible, Test The New Assembly On-Bench With A 12V Supply And Simple Load Before Full Refit To Save Time.

Additional Notes

This Unit Is Supplied As A Replacement Steering-Column Stalk Assembly Referenced By The Codes Above. Confirm Functionality After Installation By Verifying All Lighting, Wiper, Cruise And ESP-Related Inputs Operate As Expected.

Main product description

Original controls under the steering wheel (combined switch/lever) VALEO COM2008PV2-CEM00 for Citroën and Peugeot cars. OE/PSA number 98180645ZD. This is a used, fully functional part dismantled from a Peugeot 308 T9. The module provides control of the lights, fog lights, turn signals, horn, wipers (front and rear), cruise control and has preparation for controlling the car radio (need to add or transfer a separate controller/satellite depending on the equipment).

Main functions and features
– Controls: dipped/main beam, fog lights, turn signals, horn, front and rear wipers with spray
– Cruise control/speed limiter: lever for activation and adjustment (if the car is equipped)
– Preparation for car radio control: a separate controller can be remounted from the original module
– Original manufacturer: VALEO
– Type/designation: COM2008PV2-CEM00 (also known as COM2008 PV2)
– Condition: used, tested part; normal traces of use without affecting function

Technical information
– OE/PSA number: 98180645ZD (alternatively also listed as 98180645 ZD)
– Equipment variant: with cruise control, preparation for radio control
– Location: under the steering wheel, part of the steering column
– The compatibility of connectors and functional equipment must match your car and the original part

Compatibility
– Verified origin: Peugeot 308 T9
– Also often used on: selected versions of the Peugeot Partner II (B9) and related Citroën models
– Recommendation: before purchasing, always compare the part number 1:1 (98180645ZD) and the COM2008PV2 designation, or verify by VIN

Installation and service notes
– If you are replacing a part with the same number and equipment, the exchange is usually plug & play
– Telecoding/adaptation via diagnostics (BSI) and steering wheel angle sensor calibration may be required on some cars
– The car radio driver is a separate module – transfer it from the original part if it is not included
– When working on the steering column, always disconnect the battery and follow airbag safety procedures

Why choose an original used part?
– 100% original VALEO = correct compatibility and long service life
– Quick and economical repair without compromises in functionality
– Exact behavior of levers and switches as from the factory

Searched labels and keywords
– PSA CITROËN PEUGEOT 98180645ZD, 98180645 ZD
– VALEO COM2008, COM2008PV2, COM2008PV2-CEM00
– Controls under the steering wheel, combination switch, levers, light switch, turn signal lever, wiper lever, cruise control, radio control

Tip for checking compatibility
– The surest thing is to compare the label of your original module (part number and code COM2008) or send us the VIN – we will verify for you.

Original used Citroën Peugeot (PSA) 98095330ZD cruise control control/lever – for steering column with COM2008 module. It reliably operates the cruise control and speed limiter, an ideal replacement for a malfunctioning or worn part. Thanks to OEM quality, it fits exactly, has the right button logic and a long life – without the compromises typical of cheap replacements.

Main advantages
– Original PSA part 98095330ZD – assurance of compatibility and correct function
– Cruise control and speed limiter functions (CRUISE/LIMIT), buttons +/–, RES/MEM, ON/OFF
– Designed for COM2008/COM2008e modules – quick plug-in replacement without modifications
– Suitable for Citroën, Peugeot and selected derivatives on PSA platforms (Fiat/Toyota/Opel) – see below

Technical information
– Designation/OEM: 98095330ZD (PSA)
– Part Type: Control/Cruise Control Lever (Bottom Lever Under Steering Wheel)
– Location: under the steering wheel, near the steering column (left side under the turn signal)
– Compatibility module: COM2008 / COM2008e (steering column)
– Functions: cruise control activation/deactivation, speed setting +/–, restore/save (RES/MEM), LIMIT switching
– Connector: original socket for COM2008 (without installation modifications)
– Power supply: 12 V system, data communication via COM2008
– Material: durable plastic, black design with white print
– Condition: used, tested, fully functional; normal cosmetic signs of use without affecting function

Exemplary vehicle compatibility
– Citroën: C3 (II/III), C4, C4 Picasso/Grand, C5 X7, Berlingo B9 and others with COM2008
– Peugeot: 207, 208, 2008, 308 (T7/T9), 3008, 5008, Partner B9, Expert II
– Fiat: Scudo II (on PSA platform)
– Toyota: ProAce I (2013–2016, PSA)
– Opel: selected models on the PSA platform (e.g. Combo E, Zafira Life, Vivaro C – depending on equipment)
Note: Actual compatibility may vary by year of manufacture, trim and module type. Always verify by OEM number 98095330ZD, lever/connector shape and VIN.

Installation and activation
– Replacement: remove the upper/lower steering column cover, release the old lever from the COM2008 module, snap in the new one, plug in the connector
– Safety: disconnect the battery before work (min. 10 minutes) due to airbags
– Coding: if the car has not yet had cruise control active, it must be enabled in BSI/ECU diagnostics (DiagBox/Lexia/PP2000). Replacing the lever itself usually does not require any further modifications

How to verify the correct part
– Compare OEM code: 98095330ZD
– Check if the vehicle has a COM2008/COM2008e module
– Compare the shape of the lever and connector with the old part
– In case of uncertainty, send us the VIN – we will verify suitability

Why choose a used original?
– Better durability and feeling of control than cheap aftermarket copies
– Accurate fit and correct pictogram graphics
– Immediate replacement without additional modifications

Key wanted links: cruise control controller 98095330ZD, cruise control lever Citroën Peugeot, cruise control switch COM2008, cruise control switch under the steering wheel, Peugeot 308 T9 cruise control, Expert II controls under the steering wheel

Package: 1x cruise control controller/lever 98095330ZD. Functionality guarantee.

Multifunctional controls under the steering wheel (COM 2008) for Peugeot 3008 I and 5008 I ensure comfortable and safe control of the car’s key functions – direction and dipped beam lights, front fog lights, cruise control/speed limiter, control of the car radio, front wipers including rain sensor and communication with ESP. It is a central module with levers and integrated electronics that is directly connected to the vehicle’s network and shares data with, for example, the stabilization system.

This particular type corresponds to the part numbers below and is for the first generation 3008 and 5008 models. PSA offered multiple variants of the COM2008 depending on trim (with/without cruise control, with/without rain sensor, etc.), so matching the codes on your original part label and connectors is essential. If you have the numbers listed, this is the correct replacement.

When to change the part: typical symptoms of a defect are spontaneous switching or failure of turn signals or wipers, non-functioning cruise control, problems with the radio control on the lever, an ESP/ASR error message related to the angle of the steering wheel, or intermittent contacts in some positions of the lever. Due to the age of the cars and the mechanical wear of the switch contacts, the replacement of the COM2008 is quite frequent in these models.

Installation in a nutshell: disconnect the battery before work and wait a few minutes for the airbag. Remove the steering wheel airbag, release and retract the steering wheel, remove the plastic shaft covers and release the COM2008 module fuses. After the replacement, we recommend initializing/telecoding the variants via diagnostics (Diagbox/Lexia) and calibrating the steering wheel angle sensor so that the ESP, cruise control and wipers with rain sensor work correctly.

Compatibility: the module is designed for Peugeot 3008 I and 5008 I cars (approx. 2009-2016) with the corresponding equipment according to the codes below. The same platform and COM2008 designation are used for other Peugeot and Citroën models; however, always follow the matching part number and connector design.

Technical information

• Manufacturer: PSA Peugeot Citroën
• Model: Peugeot 3008 I (T84), Peugeot 5008 I (T87)
• Product codes: 96663613XT, 96773912ZD, 6243WP
• Other numbers: 6243.WP, 6243 WP, COM 2008, COM2008, 96663613 XT, 96773912 ZD

Before ordering, please compare the numbers and equipment of your car (cruise control, rain sensor, type of connectors). Correct matching will guarantee full functionality of lights, wipers, cruise control, radio control and communication with ESP.

Product Overview

High-quality steering column stalk switches (COM2008) designed for Citroën/Peugeot vehicles. This unit consolidates multiple controls on a single stalk assembly: lighting, fog lamps, cruise control, audio commands and front wiper functions including rain sensor signalling to the vehicle. Commonly searched by part numbers 96667319XT, 96773912ZD and 624399, this switch assembly is aimed at professional technicians and skilled DIYers who maintain Peugeot 3008 I and 5008 I models.

Features And Functions

• Integrated Control Of Headlights And Parking Lights
• Fog Light On/Off Functions
• Cruise Control Activation And Adjustment
• Radio/Audio Steering Commands (Where Fitted)
• Front Wiper Control Including Intermittent Settings
• Rain Sensor Interfacing (Signal To Vehicle System)
• ESP Signal Integration For Stability System Feedback

Compatibility

Designed For: Peugeot 3008 I, Peugeot 5008 I. Often Identified By: COM2008, 96667319XT, 96773912ZD, 624399. Always check the part numbers listed on the old unit before ordering to ensure exact match with your vehicle’s fitted assembly.

Replacement Procedure

Intended For Experienced Mechanics And Competent DIYers. Typical Replacement Steps:

• Disconnect The Vehicle Battery Before Any Work On Steering Column Electronics.
• Remove Steering Wheel Trim And Airbag Module Following Manufacturer Safety Procedures.
• Unscrew Or Unclip Steering Column Covers To Access The Stalk Assembly.
• Disconnect Multi-Pin Electrical Connectors And Release Retaining Clips Or Screws.
• Withdraw Old Stalk Assembly And Fit The Replacement, Ensuring Correct Connector Orientation.
• Reassemble Covers And Airbag, Reconnect Battery And Perform Functional Check Of All Controls (Lights, Wipers, Cruise, Audio).

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 96667319XT, 96773912ZD, 624399, COM2008
• Other Numbers: T84, T87

Installation Recommendations

• Always Isolate The Battery Prior To Disassembly To Avoid Airbag Deployment And Electrical Damage.
• Follow Manufacturer Torque Specifications For Any Fasteners Around The Steering Column.
• Handle Airbag Modules And Connectors Carefully; Ensure Connectors Are Fully Engaged And Security Clips Are Replaced.
• After Installation, Verify All Functions: Dipped/Main Beam, Indicators, Fog Lights, Wipers (All Speeds), Rain Sensor Response, Cruise Control And Audio Commands.
• If Any Functions Are Missing After Fitment, Inspect Connector Pins For Damage Or Corrosion And Confirm The Correct Part Code Was Fitted.

Most Common Failure Reasons

• Wear Of Internal Contact Tracks From High Use (Indicators, Wipers, Cruise).
• Oxidation Or Corrosion Of Electrical Contacts Leading To Intermittent Operation.
• Mechanical Damage To The Stalk Lever From Impact Or Excessive Force.
• Ingress Of Moisture Or Dirt Causing Short Circuits Or Sticking Switches.
• Faulty Connectors Or Broken Retaining Clips Causing Poor Electrical Connection.

Notes For Purchase

Part Numbers 96667319XT, 96773912ZD and 624399 Are Frequently Used Search Terms; Include These In Your Order To Ensure Correct Item. Suitable For Workshops And Skilled DIY Enthusiasts Who Are Comfortable Working With Steering Column Electronics.

Order Now To Replace Faulty Stalk Controls And Restore Full Functionality To Your Peugeot 3008 I Or 5008 I Steering Column.

Original control (lever) cruise control for Citroën and Peugeot with modular unit under the steering wheel type COM2008. Ideal for replacement of non -functional levers or for additional commissioning of cruise control for cars that have the necessary cabling and the COM2008 unit from production. Corresponds to codes 96655861XT, 96655861DZ and OEM 6242ZS.

Cruise control keeps the set speed without having to hold the gas, which increases comfort on longer routes and can contribute to a more economical driving. The control is intuitive – using the lever under the steering wheel set/save speed, increase/reduce the settings and temporarily turn off or restore the function.

Compatibility: Designed for PSA vehicles approximately 2008 equipped with a column module COM2008 (typically Citroën C3 II, DS3, Berlingo III B9, C5 II/X7 and Peugeot Partner III B9, etc.). Always verify before buying according to the VIN and the type of column unit to see if the COM2008 has. This part is not designed for older COM2000 assemblies (often on older models as 206, etc.).

Installation and activation: In most cases, it is sufficient to remove the plastic steering columns, insert the lever into the prepared slot in COM2008 and secure it with a screw (usually torx). Subsequently, it is necessary to activate the cruise control function in the control unit/BSI by diagnostics (diagnostics (diagnostics). For proper activity, the brake pedal must be functional in the car; Some engines also require a clutch pedal switch. After activation, we recommend performing a test drive and verify all functions (SET/RES/±, brake cancellation).

Status and tips: This is the original part of the car, common cosmetic tracks of use are not affected. You can get the highest certainty of compatibility by comparing the part number and physical verification of the type of column unit. If you additionally put into operation cruise control, check the presence of the necessary pedal switches and support the function in the engine control unit.

technical information
Manufacturer: PSA Citroën/Peugeot (OEM)
Model: Driver/Cruise control lever for COM2008 (under steering wheel)
Product codes: 96655861XT, 96655861ZD, 6242ZS
Other numbers: 6242.ZS, 96655861 XT, 96655861 ZD

If you are looking for a cruise control lever for Citroën/Peugeot with COM2008, verify the codes of 96655861XT, 96655861ZD, 6242ZS and simply refill or replace the existing driver. Properly selected part and activation through diagnostics are the key to fully functional cruise control and more convenient driving.

Drivers under the steering wheel (levers) VALEO COM2008 for Citroën C3 II and DS3. It is an original module under the steering wheel, which brings together the direction indicator/light lever, wiper lever and on -board computer drivers, or even cruise control according to the equipment of the car. Ideal replacement in a malfunction of the control of turn signals, wipers, lights or a defect in the airbag contact ring. Search and ordered often according to codes 96667324XT, 624340, 9673879ZD.

Functions and benefits: The COM2008 module is designed as a central control unit under the steering wheel. Umožňuje přesné mechanické aretace směrovek, intervalové a automatické režimy stěračů (pokud je výbavou), ovládání mlhovek a dalších funkcí dle specifikace konkrétního dílu. The Valeo design is robust and compatible with the original electrical connection of the dog – without the need to modify the cabling with the correct match of the codes.

Compatibility: Citroën C3 II (A51, approx. 2009–2016) and DS3 (A55, approx. 2010–2016). Within these models, there are variants according to the equipment (eg S/Cruise control, automatic wipers/light, fog light type). Always compare the part number on the label of your original module and connector equipment before buying. Code coincidence 96667324XT or its equivalents is crucial for proper function.

Typical manifestations of defects: spontaneous shutdown or non -switching of rigs, non -functional some wiper positions, fog lights, occasional horn outages or airbag lights due to worn contact ring. In these cases, the replacement of the entire COM2008 module is a common and fast solution.

Mounting notes: Disconnect the battery before work and wait for at least 10 minutes for the airbag. Set the wheels straight, remove the airbag and steering wheel, release the module and disconnect the connectors. During the installation, pay attention to the centering of the airbag contact ring. For ESP cars, the steering wheel is required after replacing the steering wheel sensor. We recommend installation to an experienced car mechanic.

technical information
Manufacturer: Valeo / PSA
Model: COM2008 (drivers under the steering wheel)
Product codes: 96667324XT
Other numbers: 624340, 96773879

Selection tip: follow the code on your original episode and visual match of connectors and controls. If you are unsure of compatibility, also compare the car equipment (cruise control, automatic wipers/lights). Properly selected COM2008 ensures full functionality without coding, or only with the necessary calibration for ESP cars.

It is a part designed to fit various models, including the Peugeot 407 and others that utilize the COM2008 series. Regular wear and tear can lead to malfunctions in the steering column switch due to factors such as environmental exposure, frequent usage, and electrical issues. Therefore, replacing it as needed is crucial to maintaining optimal control over your vehicle.

Installation is straightforward; simply remove the old switch and replace it with the new one, ensuring all connectors are securely attached. Regular maintenance checks can help identify when a replacement is necessary, ensuring your vehicle operates smoothly and efficiently.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: Steering Column Switch COM2008
• Product Codes: 96667313XT, 624384
• Other Numbers: 96773906ZD

High-quality steering column stalk assembly designed as a direct-fit replacement for many Citroën, Peugeot and DS models. The COM2008 stalks consolidate multiple vehicle controls into a single unit, restoring full functionality for lighting, signaling, wipers and dashboard functions. Ideal for professional technicians and DIY enthusiasts looking for an OE-compatible spare part by product code (98000242ZD, 98199434ZD, COM2008).

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot / DS)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 98000242ZD, 98199434ZD
• Other Numbers: COM2008

Compatibility And Application

Designed to replace the original multi-function stalks fitted on Citroën C4 II, Peugeot 508 and DS models (DS4, DS5). This unit controls exterior lighting (headlights, parking lights), fog lights, turn signals, horn, front and rear wipers, and provides inputs to the trip computer and onboard electronics. Customers commonly search using the product codes listed above—include these codes when locating the correct spare part.

Installation Recommendations

Before starting work, disconnect the negative battery terminal and wait at least 10 minutes to deactivate the airbag system. Remove the steering wheel trim and lower/upper column covers to access the stalk assembly. Unplug the electrical connector(s) and remove the retaining screws or clips holding the module. Fit the new stalk in reverse order, ensuring connectors are fully seated and clips engage. Refit column covers and verify all functions (lights, indicators, wipers, horn, trip computer) before returning the vehicle to service. If the steering wheel or airbag must be removed, follow the vehicle manufacturer’s safety procedures or have the job performed by a trained technician.

Why The Part Fails Most Often

Multi-function stalk assemblies are subject to frequent mechanical use and electrical switching. Common failure modes include worn contacts causing intermittent or non-functioning indicators and wipers, plastic fatigue or broken levers from repeated operation, and corrosion or moisture ingress affecting electrical connectors. Faulty stalks may also trigger electrical faults or warning lights if internal switches fail. Environmental exposure, heavy use of the wiper and indicator functions, and long service life increase the likelihood of failure.

Practical Notes For Mechanics And DIYers

• Verify the product code when searching or ordering; these units are often found by part number rather than description.
• Check related fuses and wiring if symptoms persist after replacement—intermittent faults can originate elsewhere in the circuit.
• Use care with connectors and retainers to avoid damaging fragile plastic clips on the steering column covers.
• After installation, perform a full function check: headlights (including dipped/main beam), fog lights, left/right indicators, horn, front/rear wipers and the trip computer inputs.

Replacing a faulty COM2008 stalk restores full control of essential vehicle functions and ensures safe, reliable operation of lighting and signaling systems. The part is a direct-fit option for the listed Citroën, Peugeot and DS models and is suited for both workshop installation and competent home mechanics.