High-quality multifunction steering column stalk (DELPHI COM2003) designed for PSA group vehicles. This compact control unit brings together numerous driver functions — lighting and fog lamps, wiper and washer control for front and rear, trip computer operation, ESP inputs, cruise control engagement and radio controls (radio control may need to be added or transferred from the original stalk). Ideal for professional workshops and experienced DIY mechanics who service Citroën and Peugeot models. Use key search terms like DELPHI COM2003, 96605590XT and 624297 to find this part quickly.

Fitment And Replacement

Typical fitment includes Peugeot 307 (from 2005) and other PSA models where the COM2003 stalk is used — examples from workshop records: Peugeot 206, Peugeot 307 II, Peugeot 406, Peugeot 807, Berlingo II, Citroën C5 I and Citroën C8. Always confirm physical match of connector and function block before installation. Replacement is straightforward for a trained technician: set the steering wheel to straight ahead, disconnect the battery, remove the airbag and steering wheel (follow manufacturer torque and safety instructions), disconnect the stalk wiring connectors and remove the retaining screws or clips, fit the new stalk, reconnect wiring and reassemble. After fitment, check and test all functions (wipers, lights, trip computer, ESP indications, cruise control and radio controls).

Recommended Installation

• Disconnect the battery before any work on the steering column and wait the recommended time to allow capacitors to discharge.
• Follow manufacturer procedures for airbag removal and steering wheel torque values; use the correct tools to avoid damaging trim or connectors.
• Handle electrical connectors carefully — bent pins or damaged plugs are a common fault after poor installation.
• After installation, verify all functions on the vehicle and, if necessary, clear fault codes with suitable diagnostic equipment. Recalibration of related systems may be required in specific cases.

Most Common Failure Reasons

Multifunction stalks typically fail due to internal contact wear from repeated use (wipers, indicators, cruise control switches), ingress of moisture or dirt causing corrosion of contacts, mechanical breakage of the plastic stalk or internal levers, and electrical faults from connector corrosion or short circuits. Symptoms include intermittent or non-functioning wipers, fog light or indicator failure, loss of radio controls on the stalk, or cruise control not engaging.

Technical Information

• Manufacturer: Delphi (used on PSA / Peugeot Citroën vehicles)
• Model: COM2003
• Product Codes: 96605590XT, 624297
• Other Numbers: COM2003

Why Choose This Part

This multifunction stalk consolidates multiple controls into one serviceable unit, reducing dashboard clutter and simplifying repairs. It’s a practical replacement for workshops and competent DIYers looking to restore full functionality of steering column controls. Using the correct part number (96605590XT / 624297) increases the chance of direct fit and avoids adaptors or rewiring.

Notes For Professionals

When sourcing replacement stalks, check connector type and pinout against the vehicle’s existing part. In cases where radio controls or additional functions are not present on the replacement, the original switch assembly may need to be transferred. Always perform a full functional check and clear any related fault codes after installation.

This used steering column control unit is a direct replacement option for mechanics and DIY enthusiasts working on Peugeot and Citroën vehicles. It is commonly searched by part numbers 96635796XT, 98069979XT and 6242AA, so listing these codes increases findability in online searches. The module centralizes several functions around the steering column: lighting and fog lights control, wiper and rain-sensor signals, trip computer commands, ESP interfacing and cruise control activation. In some vehicle configurations radio or cruise-control commands require transferring the original stalk or adding the corresponding module.

Compatibility And Application

Fits a range of PSA/Stellantis models — commonly used on Peugeot and Citroën cars. Notable applications include:

• Peugeot 307 / 307 CC (including models from 2005 onwards)
• Peugeot 206
• Peugeot 406
• Peugeot 807
• Peugeot Berlingo II
• Citroën C5 I
• Citroën C8

Technical Information

• Manufacturer: Delphi (used on PSA/Stellantis vehicles)
• Model: COM2003
• Product Codes: 96635796XT, 98069979XT, 6242AA
• Other Numbers: COM2003

Function And Symptoms Of Failure

The stalk assembly provides user inputs for lights, fog lights, wipers, rain sensor signals, trip computer navigation, ESP-related commands, cruise control and some radio controls. Common symptoms indicating a faulty stalk include intermittent or non-functioning indicators for fog lights or wipers, lost trip computer control, unresponsive cruise control switches, or unexpected behaviour of related circuits (flickering lights, stuck wiper positions). Electrical contact degradation can also cause fault codes related to steering column switches.

Why The Part Fails Most Often

• Wear Of Internal Contacts: Repeated use causes contact wear or carbonization, leading to intermittent signals.
• Moisture Ingress And Corrosion: Water or condensation in the column can corrode connectors and switch contacts.
• Mechanical Damage: Broken levers, snapped plastic tabs or wear of the detent mechanism from years of use.
• Electrical Faults: Short circuits, wiring chafing or connector faults can damage the module or its functions.

Replacement And Installation Notes

General replacement procedure (overview for experienced technicians):

1. Disconnect The Battery: Always disconnect the negative terminal and wait an appropriate time for airbag system capacitors to discharge before touching the steering column.
2. Remove Steering Column Covers: Unscrew and separate the upper and lower plastic shrouds to access the stalk connectors.
3. Disconnect Electrical Connectors: Carefully unplug the multi-pin connectors. Note connector positions or take photos to ensure correct reassembly.
4. Remove The Faulty Stalk: Release retaining clips or screws and remove the stalk assembly. In some vehicles partial removal of the steering wheel or airbag may be required—follow the vehicle manufacturer’s procedure.
5. Install The Replacement: Fit the new/used stalk, reconnect connectors, reassemble column covers and reconnect the battery.

Important Safety Note: Always follow the vehicle manufacturer’s repair and safety procedures when working near the airbag and steering column. If unsure, have the replacement performed by a qualified technician.

Installation Recommendations

• Ensure Connectors Are Clean: Clean oxidized or corroded terminals before installation for reliable contact.
• Transfer Required Parts: If the vehicle requires the original radio or cruise-control sub-module or trim pieces, prepare to transfer these from the donor stalk.
• Check Related Systems: After replacement, verify wiper park position, indicator operation, trip computer functions and clear any transient fault codes with appropriate diagnostic tools.
• Use Proper Tools: Avoid forcing clips or screws. Use the correct trim tools to prevent damage to covers and trim.

Why Buy This Part

This multifunction stalk offers a cost-effective way to restore multiple steering-column functions at once. It is especially useful when individual switches fail or when mechanical damage affects several controls. Listing OEM part numbers in the product title and description helps technicians and DIYers quickly identify compatibility during repairs.

Keywords: Delphi COM2003, 96635796XT, 98069979XT, 6242AA, Steering Column Stalk, Multifunction Switch, Peugeot 307 CC, Citroën.

High-quality replacement multifunction stalk designed for Citroën and Peugeot models using the DELPHI COM2003 platform. This steering column switch assembly centralizes lighting and wiper commands, trip computer navigation and stability functions into one ergonomic stalk. Ideal for professional workshops and DIY mechanics who search by part number (96567445XT / 6242A4 / COM2003). Installing a correct multifunction stalk restores full driver control over fog lamps, wipers, cruise control and related convenience functions.

Technical Information

• Manufacturer: Delphi (OEM Supplier For Stellantis)
• Model: COM2003 Multifunction Stalk
• Product Codes: 96567445XT, 6242A4
• Additional Numbers: COM2003
• Recommended Vehicles: Peugeot 206; Peugeot 307 II; Peugeot 406; Peugeot 807; Citroën C5 I; Citroën C8; Berlingo II

Installation Recommendations

• Disconnect Battery: Always disconnect the vehicle battery before starting work and wait at least 10 minutes to allow airbag capacitors to discharge.
• Safety First: Secure the steering wheel in the straight-ahead position and follow manufacturer procedures to avoid damage to the airbag and steering column components.
• Access: Remove steering column trim panels to access mounting screws and the electrical connector for the stalk.
• Connector Handling: Carefully unplug the electrical connector; avoid pulling on the wiring harness and check connector terminals for corrosion before reassembly.
• Function Check: After installation, reconnect the battery and verify all stalk functions (lights, wipers, trip computer navigation, ESP indications, cruise control). Clear any stored fault codes using a diagnostic tool if necessary.

How The Part Is Replaced

Replacement typically involves removing the upper and lower steering column covers, unfastening the mounting screws that secure the stalk to the column, disconnecting the electrical plug, and fitting the new stalk in reverse order. Depending on vehicle equipment, some functions (for example radio controls or cruise functions) may require transferring an additional control module or re-using parts from the original stalk.

Why This Part Fails

• Mechanical Wear: Frequent mechanical use leads to worn contacts and plastic components, causing intermittent or lost functions.
• Contamination: Moisture ingress or dust can corrode electrical contacts inside the stalk or at the connector pins.
• Impact Damage: Damage from accidents or rough handling during previous repairs can break internal levers or mounting points.
• Electrical Faults: Short circuits or voltage spikes in the vehicle electrical system can damage internal electronics on multifunction stalks.

Notes For Mechanics And DIYers

This multifunction stalk is a common service item on older Citroën and Peugeot models. Matching the part number (96567445XT, 6242A4, COM2003) to the vehicle is the fastest way to confirm compatibility. When replacing the stalk, inspect the column wiring and connectors for damage and ensure secure mechanical mounting to avoid rattles and intermittent electrical faults.

High-quality multifunction steering column stalk assembly compatible with a range of Stellantis vehicles. Designed for technicians and experienced DIYers, this Delphi COM2003-based stalk unit replaces worn or faulty controls for lights, wipers, cruise control and more. Commonly searched by reference numbers 96605599XT and 6242A4, this part restores reliable switching and precise control of onboard systems. Ideal when stalks become intermittent, noisy, or fail to engage features such as the trip computer, ESP signals, or wiper functions.

Key Features

• Multifunction Control: Integrates Fog Lights, Trip Computer, Front And Rear Wiper, Wiper Sensor, ESP Signals, Cruise Control And Radio Control (Radio Switch Must Be Supplied Or Transferred).
• Delphi COM2003 Platform: Robust electronic switching technology used across various Citroën and Peugeot models.
• Direct Fit For Many Stellantis Models: Designed as a replacement for original equipment stalks with matching connectors and mounting points.
• Common Reference Numbers Included For Easy Search: 96605599XT, 6242A4, COM2003.

Technical Information

• Manufacturer: Delphi / Compatible With Stellantis (Citroën, Peugeot)
• Model: Steering Column Stalk (Multifunction) – Delphi COM2003
• Product Codes: 96605599XT; 6242A4; COM2003
• Additional Numbers: Reference Often Used In Parts Searches: 96605599XT, 6242A4, COM2003
• Compatibility Notes: Fits Various Citroën And Peugeot Models Listed Below; Verify Connector And Mounting Type Against Existing Unit Before Installation.

Compatible Models (Examples)

Citroën: C5 I, C8, Berlingo II. Peugeot: 206, 307 II, 406, 807. Compatibility May Vary By Year And Equipment Level; Compare Part References Before Ordering.

Installation Recommendations

Follow safe workshop practice when replacing the steering column stalk. Basic replacement steps:

• Disconnect Battery: Always disconnect the negative battery terminal and wait sufficient time for SRS capacitors to discharge before touching airbag components.
• Remove Airbag And Steering Wheel (If Required): Release retaining screws or clips as per manufacturer procedure. Mark Steering Wheel Position To Preserve Alignment.
• Access Stalk Assembly: Remove Column Covers To Expose Switch Unit. Unplug Electrical Connectors And Remove Fasteners Holding The Stalk Module.
• Fit New Unit: Install Replacement Stalk, Reconnect All Plugs, Reassemble Column Covers, Replace Steering Wheel And Airbag. Torque Fasteners To Manufacturer Specification.
• Functional Check: Verify Wipers, Washers, Fog Lights, Trip Computer Functions, Cruise Control And Radio Controls Operate Correctly Before Returning Vehicle To Service.

Note: Airbag And Steering Wheel Work Should Be Performed By A Trained Technician If You Are Not Experienced. Use Appropriate Tools And Follow Manufacturer Safety Procedures.

Why This Part Fails

• Mechanical Wear: Frequent Use Causes Switch Contacts And Mechanical Linkages To Wear, Leading To Intermittent Or Failed Operation.
• Electrical Contact Degradation: Carbon Tracks And Contact Surfaces Can Become Worn Or Oxidized, Causing Loss Of Function.
• Moisture And Corrosion: Water Ingress Or High Humidity Can Corrode Connectors Or Internal Contacts, Especially Around The Windscreen Sealing Area.
• Impact Or Physical Damage: Collisions, Improper Removal, Or Forced Operation May Break Switch Levers Or Mounting Points.

Practical Tips For Mechanics And DIYers

• Compare The Old Unit To The New One Visually And Match Connector Types And Pinouts.
• Check Related Fuses And Wiring If Symptoms Are Sporadic Before Replacing The Stalk.
• When Reusing A Radio Or Cruise Control Button, Ensure Proper Transfer Of Sub-Components If Required.
• Search By Part Number (96605599XT / 6242A4 / COM2003) For Fast Identification And Matching.

Warranty And Quality

Sold As A Replacement Steering Column Stalk Intended For Professional Fitment. Part Condition And Warranty Depend On The Seller; Check The Specific Offer For Coverage Details.

The combined switch under the Valeo COM2003 steering wheel for PSA cars is designed for the Citroën C6 and Peugeot 407. It is a module that concentrates control of direction indicators, lights and fog lights, wiper and on -board computer – in this version for rain sensor cars and without rear wiper. Suitable for variants with ESP.

Functionally replaces the original part with codes 96611306XT and 6242T1. The correct OE codes ensure compatibility and full integration into the vehicle network. It is a popular type COM2003 from Valea, used in a number of PSA models for accurate and reliable control of the main features on the steering column.

Condition: Used, fully tested and functional. In this series, the slight clearance of the rudder lever is common – it does not skip and does not affect the function. Visual signs of use may be present, but without effect on operation.

Compatibility: Designed for Citroën C6 and Peugeot 407 in versions without a rear wiper (eg sedan/coupe) and with a rain sensor. Before ordering, always compare OE numbers on your original module (label on the body) with the codes 96611306XT and 6242T1 – this is the safest way to confirm the correct replacement.

Installation note for car mechanics: Recommend disconnect the battery at least 10 minutes before dismantling the airbag and steering wheel. After removing the steering column covers, the COM2003 module is released, disconnected, disconnects connectors and exchanges a piece per piece. In the case of ESP vehicles, the basic calibration of the steering wheel sensor is usually required using diagnostics (Diabox/PP2000) to properly function stabilizing systems and reporting on the dashboard.

Why the part often changes: over time, there is mechanical wear of contacts and microswitches, manifested with irregular function of the rudder, the non -return of the lever, the occasional malfunction of fog lights or the anger of the wiper control. Replacing the entire module is a quick and long -term reliable solution.

technical information

• manufacturer: valeo (COM2003)
• Model: Citroën C6; Peugeot 407 (with a rain sensor, without a rear wiper; with ESP)
• product codes: 96611306XT; 6242T1
• additional numbers: COM2003; Com 2003; 6242.t1; 96611306 XT

If you are looking for a replacement according to the part number, check the match with 96611306XT or 6242T1. This COM2003 levers module (Citroën/Peugeot) restores some controls of lights, rudders, fog lights, wipers and on -board computer and is ready for instant installation.

Looking for reliable spare parts for your Peugeot 307? Our drivers under the steering wheel marked with codes 96605602XT and 6242A7 are the ideal choice to maintain your car. These parts were carefully selected and tested to match original specifications and ensure smooth performance.

The levers drivers are key to the smooth control of your vehicle and ensure control of many features such as lights, fog lights, cruise control and car radio. In addition, through the integration with the on -board computer and the wiper sensor, they allow both the front and rear wiper to be effective. Choosing parts for the Peugeot 307, which work well and are reliable, is essential for your safety and driving comfort.

Technical Information:
Manufacturer: PSA Citroen Peugeot
Model: Peugeot 307
product codes: 96605602XT, 6242A7, 6242A6
More Numbers: NFP

These levers drivers are designed for the Peugeot 307, which guarantees their compatibility and high efficiency. Replacement of the old part for this quality product used can significantly improve the functionality of control in your vehicle. Our drivers under the steering wheel are not only practical, but also very reliable thanks to their robust performance and testing before sale.

Do not hesitate to increase the comfort of your Peugeot 307 with our quality levers. If you need any further information or have specific installation or functionality queries, we are available to you. Ensure these indispensable parts and enjoy a smooth ride with full control over the key features of your vehicle.

This steering column stalk assembly is a direct-fit control unit commonly used on Citroën C8 and Peugeot 807 models built from 2005 onwards. Designed for professional workshops and DIY mechanics, the unit consolidates multiple vehicle controls into a compact stalk module: fog lights, instrument cluster/trip computer commands, ESP-related signals, rear wiper control, cruise control functions and, where applicable, radio steering commands (note that radio control may require an additional or transferred stalk). Fitted correctly, it restores centralised control ergonomics and electrical responsiveness to the steering column area.

Technical Information

• Manufacturer: Delphi
• Model: Citroën C8, Peugeot 807
• Product Codes: 96605603XT
• Other Numbers: 6242A8, COM2003

Compatibility And Application

Fits Citroën C8 and Peugeot 807 vehicles from 2005 onwards using the DELPHI COM2003 electrical architecture. Often searched by product numbers 96605603XT and 6242A8 — include these codes when looking up fitment or ordering to speed identification.

Installation Recommendation

1. Disconnect the negative battery terminal and wait at least 10 minutes to reduce the risk of airbag deployment and allow capacitors to discharge.
2. Remove the steering column trim covers to access the stalk assembly. In some vehicles partial steering wheel removal or airbag disconnection may be required—follow vehicle manufacturer safety procedures.
3. Unplug electrical connectors and release any retaining clips or screws securing the stalk module.
4. Transfer any required knob or radio-control stalk from the old unit if necessary, or fit the supplied stalk as indicated.
5. Fit the replacement unit, reconnect connectors, reassemble the trim and reconnect the battery.
6. Verify all functions (fog lights, trip computer inputs, ESP-related signals, rear wiper, cruise control and radio controls) before final reassembly. Reset or relearn procedures for certain systems may be required according to the vehicle service manual.

Most Common Failure Reasons

• Electrical Contact Wear: Repeated switching causes contacts to oxidize or wear, resulting in intermittent operation or total loss of specific functions.
• Mechanical Damage: Broken levers, cracked housings or internal plastic failure from aging, impact or excessive force.
• Moisture Ingress And Corrosion: Water entry or corrosion in connectors leads to poor conductivity and malfunctioning switches.
• Wiring And Connector Issues: Bent pins, loose connectors or damaged wiring in the steering column harness can mimic stalk failure.
• Component Fatigue: Long service life and high mileage increase the chance of internal switch or spring failure.

Symptoms to watch for include intermittent or non-working fog lamps, unresponsive trip computer controls, erratic rear wiper operation, inability to engage cruise control, or missing radio steering commands. Replacing the stalk assembly with a correctly coded and fitted unit usually resolves these symptoms.

For professional fitment, follow manufacturer torque and safety specifications. If you are a DIY mechanic, ensure you have basic experience with steering column work and adhere to airbag safety precautions. Using the correct product codes (96605603XT, 6242A8, COM2003) when ordering helps ensure you receive the compatible unit for Citroën C8 and Peugeot 807 models.

Overview

High-quality used steering column control module (Valeo COM2003) tailored for Citroën C5 II and Peugeot 407 equipped with ESP. This multi-function stalk assembly manages lighting and convenience functions at the driver’s fingertips — ideal for professional garages and skilled DIY mechanics who need a direct replacement part by product number.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C5 II, Peugeot 407
• Product Codes: 96486272XT, 6242S6
• Additional Numbers: 6239JP, 6242Z6, COM2003

Compatibility

Designed for Citroën C5 II and Peugeot 407 models fitted with ESP where the COM2003 steering column control is specified. Commonly searched by the product numbers above, which helps technicians find the correct replacement quickly.

Function

• Controls Fog Lights
• Operates Trip/Board Computer
• Interfaces With Rain Sensor
• Integrates With ESP Functions
• No Rear Wiper Control On This Unit

Replacement Guide

Recommended for experienced mechanics or competent DIYers. Typical replacement procedure:

• Disconnect the negative battery terminal and wait at least 10 minutes to ensure airbag circuits are de-energized.
• Remove the steering wheel airbag and steering wheel following the vehicle manufacturer’s instructions and torque settings.
• Remove steering column trim pieces to access the stalk assembly; retain all screws and clips.
• Disconnect the multi-pin electrical connector(s) from the stalk module and release any retaining clips.
• Remove the old stalk and install the replacement, ensuring correct orientation and secure fastening.
• Reconnect the electrical connectors and reassemble trims and steering wheel. Reconnect the battery and check all functions (indicators, fog lights, trip computer, rain sensor response and ESP indicators).

Installation Recommendations

• Always follow the vehicle manufacturer’s removal and installation procedures to avoid damage to the airbag and steering column components.
• Use correct torque values for steering wheel fasteners and ensure the steering wheel is aligned before final tightening.
• Verify electrical connectors are fully seated and locking tabs engaged to prevent intermittent faults.
• After installation, confirm that ESP and instrument-cluster warnings are not present; if any warning lights remain, perform diagnostic checks with appropriate PSA diagnostic tools.

Why This Part Fails Most Often

Steering column controls are subject to frequent mechanical and electrical wear. Common failure causes include:

• Mechanical Wear: Repeated use wears internal plastic detents and return springs, causing looseness—the turn signal stalk looseness noted on this unit is typical.
• Contact Wear and Arcing: Electrical contacts can oxidize or pit over time, leading to intermittent operation of lights and switches.
• Moisture Ingress and Corrosion: Exposure to humidity or water infiltration can corrode contacts and connectors.
• Physical Damage: Impact or forceful handling during steering wheel removal/installation can break plastic parts.

Notes For Buyers

This is a used but fully functional unit. It is a direct replacement often located by the product codes listed above. Suitable for professional installation; recommended inspection of connector condition and steering column components during fitting to ensure long-term reliability.

High-quality used steering column control unit (stalk assembly) VALEO COM2003 designed for Citroën C5 II and Peugeot 407 models equipped with ESP. Ideal for professional workshops and DIY enthusiasts who search by OE numbers such as 96473051XT or 6242T0. This unit operates fog lights, the onboard trip computer, rain sensor input and ESP-related switching. The stalk is fully operational; occasional play in the turn-signal lever is noted but does not affect functionality.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C5 II, Peugeot 407
• Product Codes: 96473051XT, 6242T0, COM2003
• Other Numbers: 6242Z6, 6242S6, NFP

Function And Application

This steering column control unit consolidates multiple driver controls into a single stalk assembly. Typical Functions Include:

• Activation Of Front Fog Lights
• Operation Of Trip Computer / Onboard Display Controls
• Integration With Rain Sensor (Input Signal)
• ESP Related Switch Signals
• Turn Signal And Light Flash Functions (Note: No Rear Wiper Control On This Version)

Replacement Procedure

Basic Replacement Steps For A Workshop Or Experienced DIYer:

• Disconnect The Battery Before Starting To Prevent Short Circuits And Airbag Deployment.
• Remove Steering Column Trim Panels To Access The Stalk Mounting Screws.
• Unscrew The Mounting Fixings And Carefully Pull The Stalk Assembly From The Column.
• Disconnect Electrical Connectors, Noting Clip Locations And Any Locking Tabs.
• Fit The Replacement Unit, Reconnect All Plugs, And Reassemble Trim Panels.
• Reconnect The Battery And Verify All Functions: Indicators, Fog Lights, Trip Computer Controls, Rain Sensor Response, And ESP Signals.

Installation Recommendations

• Always Disconnect The Battery Before Removal/Installation And Follow Manufacturer Procedures To Avoid Damage To The Unit Or Airbag System.
• Use Appropriate Screwdrivers And Torque Settings To Avoid Stripping Fasteners Or Cracking Trim.
• Inspect Electrical Connectors For Corrosion Or Bent Pins; Clean Contacts If Necessary Before Reassembly.
• After Installation, Run A Full Functional Check And Clear Any Stored Fault Codes Using Workshop Diagnostic Equipment If Required.
• If The Vehicle Has Steering Angle Or Sensor Calibration Procedures, Perform Those Steps Per Manufacturer Recommendations.

Most Common Failure Causes

• Mechanical Wear Of The Stalk Mechanism Leading To Increased Play Or A Loose Feeler.
• Contact Wear Or Oxidation On Internal Switch Contacts Causing Intermittent Signals.
• Moisture Ingress Or Contamination From Spills That Affect Electrical Contacts.
• Connector Damage Or Broken Wiring In The Column Area Due To Previous Repairs Or Improper Handling.
• Impact Damage From Airbag Deployment Or Steering Column Collision.

Notes For Mechanics And DIYers

This part Is Frequently Searched By OE Numbers (96473051XT, 6242T0, 6242Z6, 6242S6) And By The VALEO COM2003 Designation. Suitable For Citroën C5 II And Peugeot 407 Vehicles Equipped With ESP. The Unit Is Offered As A Used, Fully Functional Item; Observed Slight Play In The Indicator Stalk Does Not Affect Electrical Operation.

Product Overview

High-quality Valeo COM2003 steering column switch assembly designed for Citroën C5 II and Peugeot 407 models equipped with ESP. The module integrates controls for front fog lights, on-board computer functions, rain sensor input and ESP actions. This used unit is fully operational; note that the turn signal stalk may feel slightly loose due to normal wear but operates reliably without skipping.

Key Features

• Direct replacement for original Valeo COM2003 steering column switch.
• Controls: Fog Lights, Trip/On-Board Computer, Rain Sensor Input, ESP interactions.
• Designed for vehicles without rear wiper control on the stalk.
• OEM-level fitment for Citroën C5 II and Peugeot 407 electrical systems.
• Ideal for mechanics and experienced DIY installers seeking a cost-effective, functioning replacement.

Technical Information

• Manufacturer: Valeo
• Model: Fits Citroën C5 II, Peugeot 407 (Vehicles with ESP)
• Product Codes: 96592431XT, 6242T0, COM2003
• Additional Numbers: 6242Z6, 6242S6
• Condition: Used, Fully Functional

How To Replace (High-Level Guide)

Replacement should be performed by a competent technician or an experienced DIYer familiar with steering column work and airbag safety.

• Disconnect Battery: Always disconnect the negative battery terminal and wait at least 10 minutes to ensure airbag capacitors discharge.
• Steering Wheel Position: Mark the steering wheel position relative to the shaft to ensure correct alignment on reassembly.
• Remove Trim And Airbag: Carefully remove the steering wheel trim and airbag module following manufacturer procedures. If unsure, have a professional perform this step.
• Access Switch Assembly: Remove steering column covers to expose the multifunction switch assembly. Unscrew the retaining fasteners.
• Unplug Connectors: Carefully disconnect electrical connectors from the switch assembly; do not force pins.
• Install Replacement: Fit the Valeo COM2003 unit, reconnect connectors, reassemble covers and airbag, and reconnect the battery.
• Function Check: Verify indicators, fog lights, trip computer functions, rain sensor and ESP-related signals before road testing.

Installation Recommendations

• Use appropriate tools and follow Citroën/Peugeot workshop procedures for airbag removal and steering column work.
• Do not force electrical connectors; inspect pins for corrosion or damage and clean if necessary.
• After fitting, perform a full function check of the stalks (indicators, fog lamps, on-board computer scrolling) and perform a road test to confirm proper operation of ESP interactions.
• If any dashboard warnings appear after installation, consult diagnostic equipment to read fault codes and clear adaptions if required.

Why This Part Fails

• Mechanical Wear: Frequent use causes wear of internal contacts, springs and plastic detents—leading to loosened stalks or intermittent signals.
• Electrical Contact Degradation: Carbon tracks and contact surfaces can wear or oxidize, causing loss of function or intermittent operation.
• Ingress And Corrosion: Moisture or contamination entering the column area accelerates corrosion of connectors and contacts.
• Physical Damage: Improper handling or impact (e.g., during steering wheel removal) can crack housings or break internal levers.

Compatibility Notes

This Valeo COM2003 steering column switch is commonly fitted to Citroën C5 II and Peugeot 407 models equipped with ESP. Verify the product codes 96592431XT, 6242T0, 6242Z6 or 6242S6 against the part you are replacing to confirm fitment. In many cases the assembly is a direct plug-and-play replacement, but some vehicles may store adaptations in the central electronics (BSI) that require diagnostic checking after installation.

Why Choose This Unit

Choosing this used Valeo COM2003 unit gives a cost-effective way to restore full stalk functionality on Citroën C5 II and Peugeot 407 vehicles without replacing larger modules. It is suitable for professional workshops and experienced DIY mechanics who want reliable replacement parts with original equipment fitment and proven functionality.