Original drivers under the steering wheel (levers) COM2002 VALEO for Citroën C2 and Citroën C3. The module integrates direction indicators and lighting, wiper control (including rear), fog lights and satellite controller of the car radio. Execution with rain sensor support. Ideal replacement for failure of the original module – easy solution of frequent defects, such as random sign shutdown, non -functional wiper positions or radio control outages.

This type COM2002 is designed specifically for a rain sensor; The electronics in the module communicate with BSI and, according to the equipment of the car, can also operate the on -board computer button. Always follow the OEM codes: 96488210XT, 6239.GV, 6239.tn. If the numbers match your original work, the match and connectors are usually ensured.

Why change this part: for C2/C3 cars, the COM2002 is one of the more often worn components – especially the mechanics of the rudder self -sample, micro -pipes in the levers and cable jumper (so -called clock spring). Replacement of the complete unit will restore the certainty of controlling lights, wipers and radio and prevent further unwanted behavior of electrical equipment.

Installation tips: Before any intervention, always disconnect the negative pole of the battery and wait at least 10 minutes for the airbag. This is followed by removal of the steering wheel airbag, steering wheel and plastic steering column covers. The COM2002 module is slid on the pillar and secured; It can be removed and replaced when connectors are disconnected. Pay attention to the correct centering of the airbag ring (flat cable) to avoid damaging it at full refund.

Technical information

• manufacturer: valeo/psa
• Model: Citroën C2; Citroën C3 I; Citroën C3 pluriel
• product codes: 96488210XT; 6239.GV; 6239.tn
• Additional numbers: Module designation COM2002; design with a rain sensor

Key advantages: The original VALEO version guarantees the proper functioning of all levers and drivers, full compatibility of connectors and communication with BSI. Thanks to accurate pairing according to OEM numbers 96488210XT / 6239GV / 6239TN you can quickly find the right part for the Citroën C2 and C3 (including the pluriel version) without the need for modifications.

This cruise control stalk is a direct-fit steering column switch designed for Citroën and Peugeot models equipped with the combined COM2000/COM2002 control cluster. Built with professional workshops and DIY mechanics in mind, the part carries common OEM reference numbers used in service and spare-part searches, making it easy to find and replace. The stalk restores reliable speed-hold and resume functions, improving driver comfort on longer journeys and ensuring correct interaction with the vehicle’s cruise system.

Features And Application

• Direct Fit For Vehicles Using COM2000 / COM2002 Instrument Cluster.
• Compatible With Numerous Citroën And Peugeot Models — Typical Applications Include 206, 307, 406, 407, 807, Berlingo II, C5 I, C8, And Partner II.
• OEM Cross-Reference Numbers Included To Simplify Searching And Ordering.
• Designed For Mechanics And Skilled DIY Installers — Simple Mechanical Replacement With Standard Tools.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën 206; Citroën 307; Citroën 406; Citroën 407; Citroën 807; Citroën Berlingo II; Citroën C5 I; Citroën C8; Peugeot 206; Peugeot 307; Peugeot 807; Peugeot Partner II
• Product Codes: 96336889XT, 9641796480, 96538213XT
• Additional Numbers: 96336889ZL, 6242Z9, 9633689XT

Installation Recommendations

• Always Disconnect The Battery Before Starting Work And Wait The Manufacturer-Recommended Time To Deactivate The Airbag System.
• Remove Steering Column Trim Carefully To Access The Stalk Mounting Screws Or Clips.
• Unplug Electrical Connector(s) From The Old Stalk; Note Connector Positioning To Avoid Incorrect Reassembly.
• Fit The Replacement Stalk In Reverse Order, Ensuring Secure Fastening Of Screws And Proper Routing Of Wiring Harnesses.
• After Installation, Verify All Cruise Functions (Set, Resume, Cancel) And Check The Instrument Cluster For Fault Codes; Clear Any Stored Faults If Present.

Common Failure Reasons

• Mechanical Wear And Tear Of The Internal Switch Contacts After Years Of Use.
• Oxidation Or Corrosion Of Electrical Contacts, Especially In Vehicles Exposed To Moisture.
• Physical Damage From Impact Or Improper Handling During Steering Repairs Or Airbag Deployment.
• Intermittent Operation Caused By Loose Connectors Or Damaged Wiring In The Steering Column.
• Faults In The Combined COM2000/COM2002 Unit May Also Affect Cruise Function, So Diagnose Both The Stalk And The Control Unit.

Practical Tips

• When Replacing The Stalk, Inspect The Wiring Harness And Column Connectors For Corrosion Or Heat Damage — Repair Faulty Contacts Before Reassembly.
• Keep A Note Of The Original Part Number Before Removal To Ensure Correct Cross-Reference And Fast Reordering.
• Use Proper Torques On Fasteners And Avoid Over-Bending The Stalk To Prevent Premature Failure.

Why Mechanics Choose This Part

Clear OEM References, Direct Fitment To Common Citroën And Peugeot Models, And A Robust Mechanical Design Make This Cruise Control Stalk A Reliable replacement option for workshops and experienced DIYers. The part simplifies repairs, reduces vehicle downtime, and restores full cruise functionality without major electrical work in most cases.

These COM2002 Valeo steering column switches are designed to seamlessly operate multiple vehicle functions for the Citroën C3 Pluriel. They control headlights, Sensodrive system, fog lights, car radio, trip computer, front windshield wipers, and the horn, providing comprehensive control at your fingertips.

Designed for both professional mechanics and individual car enthusiasts, these reliable steering switches offer an affordable and effective replacement option to maintain your vehicle’s original performance and safety. Their robust design ensures smooth operation and longevity, which is crucial since steering column switches are subject to frequent use and occasional wear.

Replacement of the steering column switches typically involves removing the steering column cover to access and disconnect the faulty switch module, followed by installing the new unit and verifying all functions operate correctly. Regular inspection is recommended as faults often occur due to wear of internal contacts or exposure to dust and moisture.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C3 Pluriel, COM2002
• Product Codes: 96488228XT, 6239VN
• Additional Numbers: NFP

This part is primarily intended for the Citroën C3 Pluriel but may be compatible with other Citroën and Peugeot models according to manufacturer specifications. For questions about compatibility or installation, please contact our support team.

We provide expert advice and support to ensure proper installation and safe functionality of this essential component. Trust our range of quality parts to keep your Citroën or Peugeot running smoothly and safely.

Designed for the PSA Citroën and Peugeot models, this switch is compatible with the Citroën C2 and C3. The ease of installation allows for a straightforward replacement process, typically requiring only basic tools. It’s advisable to replace the switch if you experience any issues with your vehicle’s lighting or wiper systems, as these problems can stem from a malfunctioning component.

Technical Information:

• Manufacturer: Valeo
• Model: Citroën C2, C3
• Product Codes: 96474011XT, 6239EH
• Additional Numbers: N/A

Thanks to their multifunctionality, the controls allow for convenient operation of fog lights, rear wipers, and radios directly from the driver’s position. An integrated rain sensor further enhances driving safety in adverse weather conditions by automatically activating the wipers.

Technical Information:
Manufacturer: VALEO
Model: CITROËN C2, C3, PEUGEOT 1007
Product Codes: 96474025XT, 96576781XT, 6239X0
Additional Numbers: COM2002

When replacing the old control with a new one, it’s important to verify the product’s compatibility with your vehicle and ensure that all connections are correctly attached. Replacement parts should be installed by a trained technician to avoid any issues related to improper installation.

With our used parts, you gain not only quality and reliability but also a cost-effective solution that is much friendlier than purchasing new components. All our products undergo thorough inspection, so you can expect performance comparable to original new parts.

Are you searching for high-quality and reliable control switches for Citroën and Peugeot models? We present to you the VALEO COM2002 control switches, which are compatible with Citroën C2, C3, C3 Pluriel, and Peugeot 1007. These switches are mounted under the steering wheel and allow easy operation of fog lights, rear wipers, car radio, and wiper sensors. Thanks to their high quality and precise workmanship, they are an ideal choice for replacement parts.

Control switches are designed to provide maximum functionality and long-lasting durability. Replacing these switches is often necessary due to wear or damage, and with our used parts, you can obtain a reliable replacement for a fraction of the cost of a new part. These components are known for their durability and long-term reliability, which is why they are highly sought after by both mechanics and users performing DIY repairs.

Technical Information:
Manufacturer: Valeo
Model: COM2002
Product Codes: 96488214XT, 6239VA
Additional Numbers: NFP
This model of control switches has been specifically designed for use in Citroën and Peugeot vehicles, ensuring seamless compatibility and performance.

Investing in quality replacement parts is key to keeping your vehicle in excellent technical condition. With our VALEO COM2002 control switches, you can be assured that you are getting a product that meets your expectations and also contributes to better functionality of your car. Remember, the right part not only enhances driving safety but also provides comfort and convenience while driving.

Are you looking for a reliable and high-quality steering control for your Citroën C2 or C3? Order this used but fully functional control that is perfect for replacing original non-functional or worn-out parts in your vehicle.

This steering control is designed for precise operation of your vehicle’s functions, including fog lights, rear wipers, car radio, and cruise control. The integrated rain sensor guarantees that your driving will always be comfortable and safe, regardless of the weather conditions. The radio and cruise control control must be transferred from your existing vehicle, allowing for simple installation without the need for further modifications.

Technical Information:
Manufacturer: Valeo
Model: Citroën C2, Citroën C3
Product Codes: 96488227XT, 6239VL
Additional Numbers: 6239VL NFP

This steering control has been thoroughly tested to guarantee its full functionality. It comes from trusted sources, ensuring you receive a product that meets your expectations and high standards. It is specifically designed for Citroën C2 and Citroën C3 models, making it an excellent choice for owners of these vehicles.

Thanks to its robustness and wear resistance, it promises long-term reliability and functionality. Additionally, transferring the radio and cruise control from your existing vehicle means you won’t need to invest in new expensive parts.

Whether you are a professional mechanic or someone who repairs their own car, this steering control is a great choice to ensure that your Citroën continues to operate smoothly and efficiently. Order now and get the replacement part you can rely on during the most demanding drives!

These switches manage crucial functionalities such as headlights, fog lights, radio controls, cruise control, ESP, and the front and rear windshield wipers. A functional steering column switch ensures a smooth and safe driving experience by allowing easy access to essential controls. Common issues with older or worn-out switches may include faulty signal operations or intermittent failures, often due to wear and tear over time.

For ease of installation, you can have your old switch replaced at our partner service in Most, or opt for our mobile mechanic service, which brings the expertise right to your doorstep.

Technical Information

• Manufacturer: Valeo
• Model: Steering Column Switch
• Product Codes: 96488239XT, 6239HV
• Additional Numbers: COM2002

This switch is integral in managing various car functions, including lights, SENSODRIVE, fog lights, the radio, trip computer, front and rear wipers, and the horn. A malfunctioning switch can lead to inconvenience and safety issues, making timely replacement important.

Installation of this steering wheel control switch is straightforward. It typically involves removing the airbag and steering wheel, followed by the replacement of the old switch with the new one. Be sure to disconnect the battery before starting the installation process to avoid any electrical mishaps.

Generally, steering wheel control switches may fail due to wear and tear from constant usage or electrical issues. Most vehicle owners may face issues after several years of regular driving.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C2, C3
• Product Codes: 96488229XT, 6239VP
• Other Numbers: COM2002

With the part number 96474013XT and alternative number 6239W8, this switch manages critical operations including headlights, fog lights, the radio, cruise control, front and rear wipers, the sensor, and the horn. It’s a vital element for ensuring safety and functionality while driving.

Over time, steering column switches may wear out due to regular usage, leading to malfunction or complete failure. Common issues can arise from faulty connections or wear on the internal components. It is advisable to inspect and replace the switch if you experience problems with controlling lights, wipers, or other functions.

Technical Information

• Manufacturer: PSA
• Model: Citroën C2, C3; Peugeot 1007
• Product Codes: 96474013XT
• Additional Numbers: 6239W8