Original DELPHI COM2005 steering wheel controls (light and wiper stalks) for Peugeot 307 and 308. Used, fully functional disassembly part – ideal as a replacement for a faulty module that causes turn signals, wipers or fog lights to not work. Often searched by codes 96651590XT, 6242.CC, 6424.KN, 98069976XT.

Key features
– Type: COM2005 (multiplex/CAN) – cannot be confused with COM2000
– Manufacturer: DELPHI / PSA
– Functions: indicators and lights, front and rear wipers and washers, fog lights, on-board computer control (button at the end of the lever)
– Unit under the steering wheel with two levers; may also include a rotary airbag connector (clockspring) – refer to product photos
– Mostly plug & play; available functions depend on BSI configuration

OEM/PSA numbers (for search and match verification)
– 96651590XT
– 98069976XT
– 6242.CC
– 6424.KN

Compatibility
– Peugeot 307 (especially facelift with CAN, circa 2005–2008)
– Peugeot 308 I (T7, 2007–2013)
Note: Some models like the Xsara Picasso use the COM2000 version; this part is COM2005. Always check compatibility by part number and connectors.

Technical information
– Interface: PSA multiplex/CAN
– Controls: left stick (lights, indicators, fog lights), right stick (wipers/washers, rear wiper), on-board computer button
– Connectors and mechanical mounts must match your original unit
– For cars with ESP, calibration of the steering wheel angle sensor may be necessary after installation

Condition and warranty
– Used original part, tested during disassembly, visually inspected; condition see photos
– Functionality guarantee according to the conditions of our e‑shop

Installation recommendations
– Always disconnect the battery before assembly (work in the airbag area)
– Compare part numbers (eg 96651590XT / 98069976XT / 6242.CC / 6424.KN), lever designs and connectors with your old part
– If you have cruise control in your car, check if you need a version with a cruise control stick

Why choose a used original?
– Better reliability and compatibility than cheap replacements
– Significant savings compared to a new part
– Quick replacement without the need to modify the cabling

Not sure about compatibility? Send us the VIN or a photo of the label and connectors of your unit – we will verify compliance with parts 96651590XT, 98069976XT, 6242.CC, 6424.KN.

High-quality replacement COM2000 stalks designed for Citroën and Peugeot models provide reliable control of lighting, wipers and signaling functions. Perfect for professional workshops and DIY mechanics who want a direct-fit solution that restores full steering-column functionality. The unit is commonly sought by part number, so please check the listed product codes for quick identification. Ideal for vehicles where the original stalks show wear, intermittent contacts, or broken mechanical parts.

Key Features

• Direct-fit COM2000 steering column stalks for multiple Citroën and Peugeot models.
• Controls: Headlights, Fog Lamps, Front And Rear Wipers, Horn. Cruise Control And Radio Functions May Require Additional Components Or Transfer Of Existing Control.
• Durable electrical contacts designed for frequent switching and harsh in-cabin conditions.
• Commonly identified by OEM and aftermarket product codes for fast cross-referencing.

Compatible Models

Typically fitted to Citroën Berlingo, Citroën Xsara, Peugeot 206 and Peugeot Partner ranges (including Berlingo II / Partner II / Xsara variants). Use the product codes below to confirm exact fitment for a specific vehicle generation or trim.

Replacement Procedure

• Disconnect battery and follow manufacturer instructions for SRS/airbag safety before starting work.
• Remove steering column trim panels to access the stalk assembly; keep screws and clips organized for reassembly.
• Unplug electrical connectors from the old stalk unit and release any retaining clips or screws.
• Fit the new COM2000 stalk assembly, secure mechanically and reconnect the electrical plugs until they click.
• Reassemble trim, reconnect the battery and verify all functions: lights, indicators, wipers, horn and any transferred cruise/radio controls.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Steering Column Controls / COM2000 Stalks
• Product Codes: 96605638XT, 96787362XT, 624235
• Other Numbers: 6239AE, 6239CQ, 6242F0, COM2000

Installation Recommendations

• Always Disconnect The Battery Before Working On The Steering Column And Wait The Recommended Time For SRS Circuits To Discharge.
• Follow Manufacturer Procedures For Airbag Removal If Necessary; If Unsure, Have A Trained Technician Perform The Task.
• Ensure Connectors Are Clean And Free Of Corrosion; Lightly Inspect Contact Pins Before Reconnection.
• If Cruise Control Or Radio Functions Are Not Working After Swap, Check Whether The Function Requires Transferring The Original Control Module Or Additional Coding.

Most Common Failure Reasons

• Mechanical Wear: Frequent use causes switches and plastic levers to loosen or break over time.
• Electrical Contact Degradation: Oxidation, dirt and arcing lead to intermittent operation of lights, indicators or wipers.
• Moisture Ingress Or Corrosion: Exposure to humidity can corrode contacts and connectors inside the stalk assembly.
• Impact Or Physical Damage: Steering column impacts or rough handling during repairs can crack levers or damage internal mechanisms.
• Faulty Connectors Or Wiring: Problems in the vehicle harness or connectors can mimic stalk failure; inspect wiring before replacement.

This COM2000 stalk assembly is a practical replacement to restore steering-column switch functionality. Check the product codes listed above to match the correct unit to your vehicle model and configuration.

COM2000 levers drivers for Citroën and Peugeot with multiplex wiring. The module under the steering wheel brings together control of lights, fog lights, rudders, front wipers and horn; The equipment also supports cruise control and remote control of the car radio (the radio driver must be delivered or transferred from the original episode as needed). Thanks to the original design of the dog is ensured proper communication with the on -board network and the functionality of all relevant systems.

This combined switch is located on the steering wheel pillar. Typical manifestations of its wear are spontaneous flashing, ripples outages, non -functional wiper interruptions, occasional clampson malfunction or problem control of fog lights. The replacement is suitable for the symptoms mentioned or after mechanical damage to the levers.

Mounting tip: disconnect the battery before starting work and wait for the system discharge (due to the airbag). Then remove the steering columns, remove the airbag steering wheel according to the manufacturer’s procedures and release the switch from the lock. Carefully compare the connectors, equipment (fog lights, cruise control, radio control) and unit designation before assembling the new part. For some cars, it is necessary to re -install a separate car radio driver or cruise control lever from the original part.

technical information

• Manufacturer: PSA (Citroën/Peugeot), designation of the COM2000 module
• Model: Peugeot 206; Peugeot 307 I; Citroën Berlingo II; Peugeot Partner II
• Product codes: 96605695XT (OE)
• Other numbers: COM2000, crowd

Recommendations for selection: follow the code 96605695XT and compare physical design and equipment. The right choice of variant ensures trouble -free functioning of rudder, lights, wipers and additional functions such as cruise control and audio system control.

Drivers under the steering wheel Delphi COM2000 for Citroën/Peugeot – original used part with codes 96451821ZL and 6242G5. It is a complete module under the steering wheel (switch below the steering wheel), which ensures everyday control of lights and wipers. The ideal replacement for a fault of the direction lights, wipers or horn, when it is often found according to code 6242G5 / 96451821ZL.

Module function: control of dipped/long -distance and fog lights, rudders, front and rear wiper and washer, horn and on -board computer. It also supports automatic wiper modes (in rain sensor cars).

Compatibility according to models: Peugeot 206, 307 I, 406, 807 and Citroën C5 I, C8, Berlingo II, Partner II, Xsara and Xsara Picasso. Always verify the match by the part number and connectors to your original unit, because the dog used multiple variants of COM2000 according to the equipment.

Typical manifestations of defects and reasons of exchange: spontaneous flashing or ripples, non -functional horn, irregular wiper operation, non -return lever to the basic position or occasional loss of contact. The cause is mechanical wear of internal contacts and microswitches due to age and frequent use.

Installation notes: The replacement takes place under the steering wheel. Always disconnect the battery for safety reasons and wait a few minutes before dismantling the airbag. After removing the steering wheel, the COM2000 is released from the shaft and disconnects the connectors. During the installation, pay attention to the correct centenance and locking of the unit. In most cases, the plug & play; For some cars, the basic settings/configuration of functions via the diameter/lexia may be required after assembly (eg the presence of fog lights or rear wiper is controlled by BSI configuration).

technical information

• Manufacturer: Delphi (PSA Citroën/Peugeot)
• model: COM2000 – module lever under the steering wheel
• Product codes: 96451821zl, 6242G5
• Other numbers: 96 451 821 ZL, 6242.G5, COM2000

Tip for the correct selection: Compare the label on your original episode (numbers 9645… / 6242…) and the shape / number of connectors. Code agreement significantly increases the certainty of compatibility within the vehicle equipment.

Product Overview

High-quality cruise control stalk (steering column switch) designed for Citroën and Peugeot passenger cars equipped with the COM2008/COM2000 control systems. Ideal for professional workshops and experienced DIYers who perform steering-column electrical repairs. This switch restores cruise control and speed limiter functions, improving driver comfort and safety. Commonly searched by part numbers 96655861XT, 96655861ZD and reference 6242.ZS.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: COM2008 / COM2000 (control unit type); Fits many vehicles from 2008 onward
• Product Codes: 96655861XT, 96655861ZD, 96655861DZ
• Other Numbers: 6242.ZS, 6242ZS

Fitment / Compatible Models

Typical fitment includes, but is not limited to: Citroën C3 II, DS3, C5 II, C8, Berlingo III; Peugeot 206, 308 (T9), 407, 807, Partner III, Expert II, Jumpy II. Also compatible with other Citroën and Peugeot models equipped with COM2008/COM2000 steering column controls.

Function and Features

The stalk assembly provides user control for cruise control and speed limiter functions: set, resume, accelerate/decelerate and cancel. It interfaces with the vehicle’s COM module and sends switch signals to the engine management and convenience systems. Constructed with electrical contacts and mechanical switches designed for frequent use; replacement restores reliable button response and system interaction.

Installation Recommendations

• Safety First: Always disconnect the battery before starting work and follow the vehicle manufacturer’s instructions to avoid damage to steering column electronics and airbags.
• Basic Steps: Remove lower and upper steering column trim, unfasten retaining screws, unplug the connector from the old stalk, remove the stalk and install the new unit in reverse order.
• Tools: Common trim tools, Torx/Phillips screwdrivers and a small ratchet set are usually sufficient. Use anti-static precautions if available.
• Electronics: In most COM2008/COM2000 installations the stalk is plug-and-play and functions immediately after installation. In some vehicle configurations adaptation or coding with a PSA diagnostic tool (DiagBox/Lexia) may be required to enable all functions.
• Testing: After reassembly and battery reconnection, verify all stalk functions (set, resume, +/-, cancel) and check for any fault codes on the dashboard.

Why This Part Most Commonly Fails

• Wear Of Electrical Contacts: Frequent use causes contact erosion or intermittent signals, leading to unresponsive or erratic cruise control operation.
• Mechanical Damage: Breakage of plastic levers or internal components due to impact, rough handling during steering column repairs or aging.
• Corrosion And Moisture Ingress: Environmental exposure or condensation can corrode contacts and connectors, producing faults.
• Connector/Cable Issues: Loose or damaged wiring at the plug causes intermittent loss of function.
• Symptoms To Watch For: Cruise not engaging, buttons intermittently non-responsive, stuck stalk, or persistent control-related fault messages on the dash.

Recommendation

If the stalk shows intermittent faults or physical damage, replacement is the most reliable remedy. For workshops, inspect connector pins and harness condition before replacing; for DIY repairs, follow the safety and installation steps closely and confirm full system operation after fitting.

Original combined switch below the Delphi COM2000 steering wheel for Citroën and Peugeot. Suitable as a replacement for defective rudder, lights and wipers on models with multiplex wiring. This module (dog codes 96511179XT, 6242C2) is often sought by part number and replaces the unavailable original (NFP). Ideal for Citroën C5 I, C8, Berlingo II and Peugeot 206, 307, 807, Partner II – Always compare numbers and connectors before ordering.

The function and equipment of the module vary according to the version of the car: usually includes fog lights, wipers (including rain sensor, if equipped with) the rear wiper, on-board computer, cruise control and car radio control. For the radio controller, it may be necessary to add or transfer the existing control from your car. If you are dealing with spontaneous switching of lights/wiper, impaired blinker return or non -functional switching of on -board computer modes, the replacement of the COM2000 module is a common and effective solution.

Installation notes: The replacement is removed by removing the steering wheel and plastic steering column covers. Always disconnect the battery for safety reasons and wait at least 10 minutes before handling the airbag. Then disconnect the module connectors, release the lock and replace the piece with a piece. In most cases, the installation of plug & play; Activation of cruise control (if the car did not have before) may require diagnostics and permission to function in BSI/ECU. Compare the position and type of connectors, the lever and the equipment (fog lights, rain sensor, radio control).

technical information

• Manufacturer: Delphi (COM2000)
• Model: Citroën C5 I, C8, Berlingo II; Peugeot 206, 307, 807, Partner II
• Product codes: 96511179XT, 6242C2
• Other numbers: 624231, 9239p3

This is the original part of the removal. Before purchasing, please carefully verify the match by the number of the part and equipment of the car; Different variants of COM2000 differ according to functions (fog lights, rain sensor, cruise control, radio control). Thanks to accurate pairing according to OEM codes (96511179XT, 6242C2, 624231, 9239p3), you minimize the risk of incompatibility and get a reliable replacement for the original module, which is already kept as NFP.

High-quality Steering Column Stalk Assembly Designed To Replace Faulty Or Worn EATON COM2000 Units On Various Citroën And Peugeot Models. This Multifunction Stalk Operates Fog Lights, Trip Computer Functions, Wiper Sensor Inputs, Horn, Cruise Control And Radio Controls (Radio Button Module May Need To Be Supplied Or Transferred From The Original Unit). The Part Is Commonly Referenced By Its Product Code 96375855ZL When Searching In Catalogs Or Online.

Technical Information

• Manufacturer: Eaton (Used On Stellantis Citroën/Peugeot)
• Model: COM2000 / Steering Column Stalk
• Product Codes: 96375855ZL, 963758555ZL
• Additional Numbers: 6242F9, COM2000
• Compatible Vehicles: Citroën C5 (I), Citroën C8, Citroën Xsara, Citroën Xsara Picasso, Peugeot 307, Peugeot 807

Function And Application

The Stalk Assembly Centralizes Several Controls On The Steering Column To Provide Convenient Access To Lighting, Wipers, Cruise Control, Horn And Radio Functions Without Removing Hands From The Wheel. It Interfaces With The Vehicle’S Steering Column Wiring Harness And The Central Electronics Unit To Transmit Switch Signals To The Relevant Systems.

How Replacement Is Performed

General Replacement Steps For Mechanics And Experienced DIYers:

• Disconnect The Battery And Wait A Few Minutes To Ensure Systems Are De‑energized.
• Remove Steering Column Trim Covers To Access The Stalk Fastenings.
• Unscrew The Mounting Screws And Carefully Unplug Electrical Connectors.
• Transfer Any Required Submodules (For Example Radio Control Buttons) If They Are Not Included With The New Stalk.
• Fit The Replacement Unit, Reconnect Connectors, Reassemble Trim And Reconnect The Battery.
• Verify All Functions: Indicators, Wipers, Fog Lights, Trip Computer Inputs, Horn, Cruise Control And Radio Controls.

Installation Recommendations

Always Disconnect The Battery Before Starting Work. Use Correct Trim Tools To Avoid Damage To Plastic Covers. Ensure Connectors Seat Properly And Retaining Clips Are Engaged. If The Radio Control Module Is Separate, Transfer It Carefully To Preserve Wiring And Connectors. After Installation, Check All Functions Under Static Conditions And During A Short Test Drive.

Why The Part Most Commonly Fails

Common Causes Of Failure Include Mechanical Wear Of Internal Contacts, Oxidation Or Corrosion On Electrical Contacts, Ingress Of Moisture Or Dirt, Broken Plastic Levers Or Mounting Clips And Intermittent Connector Faults. Frequent Use Of Buttons And Switches, Long Service Life Or Exposure To Humidity Accelerates Degradation.

Notes And Practical Tips

• Part Numbers Like 96375855ZL Are Often Used By Technicians And DIY Customers To Find The Correct Replacement Quickly.
• If Radio Controls Are Missing From The Supplied Unit, Plan To Transfer The Original Control Module Or Source The Specific Module Separately.
• After Replacement, Perform Functional Checks For All Associated Systems; Some Features May Require Additional Initialization In The Vehicle’S Settings, Depending On Model And Equipment.

COM2000 steering wheel driver from Delphi for Citroën and Peugeot. The module brings together the rudder and light levers, fog lights, front and rear wiper controls, horn and, according to the equipment, also controls the car radio and cruise control. It is an original used part of the dog, ideal as a replacement for a defective switch. It is also wanted under codes 96511180XT and 6242C3.

Suitable solution for frequent COM2000 defects: spontaneous shutdown or inaccurate automatic return of turn signals, wiper speeds, non -functional fog lights, occasional clampson malfunction or airbag error caused by defective spiral cable in the ring under the steering wheel. Replacement of the complete unit gets a quick and reliable repair without lengthy diagnostics of individual subcovers.

As a rule, the assembly is simple: when the battery is disconnected (wait at least 10 minutes due to the airbag system), the airbag and the steering wheel are removed, the Bajonet COM2000 is unlocked, the connectors disconnect and the spare part is deployed. For some equipment it is necessary to transfer a separate cruise control driver or radio control to the new unit. When handling the spiral airbag cable, make sure to maintain its center position.

technical information
Manufacturer: Delphi (COM2000)
Model: Citroën C8, Citroën Xsara, Citroën Xsara Picasso, Peugeot 206, Peugeot 807
product codes: 96511180XT, 6242C3
Other numbers: 624227, 6239AV, 6239P5, 6239PP, 6239Q9, 6239wy, 6239V9

Before purchasing, we recommend verifying the match according to the OEM code and equipment of your car (fog lights, radio control, cruise control, rear wiper). Match by part number is the safest way to ensure full compatibility without the need for modifications.

This cruise control stalk is a direct-fit steering column switch designed for Citroën and Peugeot models equipped with the combined COM2000/COM2002 control cluster. Built with professional workshops and DIY mechanics in mind, the part carries common OEM reference numbers used in service and spare-part searches, making it easy to find and replace. The stalk restores reliable speed-hold and resume functions, improving driver comfort on longer journeys and ensuring correct interaction with the vehicle’s cruise system.

Features And Application

• Direct Fit For Vehicles Using COM2000 / COM2002 Instrument Cluster.
• Compatible With Numerous Citroën And Peugeot Models — Typical Applications Include 206, 307, 406, 407, 807, Berlingo II, C5 I, C8, And Partner II.
• OEM Cross-Reference Numbers Included To Simplify Searching And Ordering.
• Designed For Mechanics And Skilled DIY Installers — Simple Mechanical Replacement With Standard Tools.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën 206; Citroën 307; Citroën 406; Citroën 407; Citroën 807; Citroën Berlingo II; Citroën C5 I; Citroën C8; Peugeot 206; Peugeot 307; Peugeot 807; Peugeot Partner II
• Product Codes: 96336889XT, 9641796480, 96538213XT
• Additional Numbers: 96336889ZL, 6242Z9, 9633689XT

Installation Recommendations

• Always Disconnect The Battery Before Starting Work And Wait The Manufacturer-Recommended Time To Deactivate The Airbag System.
• Remove Steering Column Trim Carefully To Access The Stalk Mounting Screws Or Clips.
• Unplug Electrical Connector(s) From The Old Stalk; Note Connector Positioning To Avoid Incorrect Reassembly.
• Fit The Replacement Stalk In Reverse Order, Ensuring Secure Fastening Of Screws And Proper Routing Of Wiring Harnesses.
• After Installation, Verify All Cruise Functions (Set, Resume, Cancel) And Check The Instrument Cluster For Fault Codes; Clear Any Stored Faults If Present.

Common Failure Reasons

• Mechanical Wear And Tear Of The Internal Switch Contacts After Years Of Use.
• Oxidation Or Corrosion Of Electrical Contacts, Especially In Vehicles Exposed To Moisture.
• Physical Damage From Impact Or Improper Handling During Steering Repairs Or Airbag Deployment.
• Intermittent Operation Caused By Loose Connectors Or Damaged Wiring In The Steering Column.
• Faults In The Combined COM2000/COM2002 Unit May Also Affect Cruise Function, So Diagnose Both The Stalk And The Control Unit.

Practical Tips

• When Replacing The Stalk, Inspect The Wiring Harness And Column Connectors For Corrosion Or Heat Damage — Repair Faulty Contacts Before Reassembly.
• Keep A Note Of The Original Part Number Before Removal To Ensure Correct Cross-Reference And Fast Reordering.
• Use Proper Torques On Fasteners And Avoid Over-Bending The Stalk To Prevent Premature Failure.

Why Mechanics Choose This Part

Clear OEM References, Direct Fitment To Common Citroën And Peugeot Models, And A Robust Mechanical Design Make This Cruise Control Stalk A Reliable replacement option for workshops and experienced DIYers. The part simplifies repairs, reduces vehicle downtime, and restores full cruise functionality without major electrical work in most cases.

Looking for high-quality and reliable steering column switches for your Citroën or Peugeot? Our used auto parts are an excellent choice for professional mechanics or individuals who prefer to perform vehicle repairs themselves. These switches are essential for the proper functioning of many key vehicle components.

This product enables full control over lights, fog lamps, front and rear wipers, indicators, horn, electronic stability program (ESP), cruise control, and the car stereo — particularly useful if you wish to maintain your current control setup or transfer switches from an original configuration.

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Model: Primarily compatible with Peugeot 307
• Product Codes: 96439234ZL, 6242F3
• Additional Numbers: NFP

Our steering column switches are designed to meet the original equipment specifications and ensure seamless integration and operation. Since these are older parts, we recommend thoroughly verifying product compatibility with your specific vehicle.

Purchase from us to obtain reliable auto parts with a solid performance history and long service life. Our products are carefully inspected to guarantee their functionality, helping keep your vehicle safe and fully operational.