Reliable Sanden Air Conditioning Compressor designed for Citroën and Peugeot vehicles. This unit (Sanden 1355F SD6V12) offers robust cooling performance and is commonly used in a range of Stellantis models. It Is Supplied With Standard Mounting Points And Electrical Connector Arrangement Compatible With Many OEM Installations, Making It A Practical Choice For Professional Workshops And Competent DIYers Looking To Restore Full A/C Functionality.

Key Features And Benefits

Efficient Cooling Performance: Engineered To Deliver Stable Refrigeration Capacity Under Typical Driving Loads, Improving Cabin Comfort And Defogging Capability. Durable Construction: Internal Components And Clutch Designed For Long Service Life Under Normal Operating Conditions.Direct Replacement: Matches Common OEM Mounting Interfaces And Electrical Connections For Easier Fitment.Supports Routine Service: Works With Standard A/C Service Procedures (Recovery, Evacuation, And Recharge), Allowing Fast Turnaround In A Workshop Environment.

Compatibility And Application

Common Fitment Includes Citroën C4 And Select Peugeot Models Such As Peugeot 207, 307 And 308. Compatibility Is Often Referenced By Product Codes And OEM Numbers Listed Below; Always Verify The Part Number On The Vehicle Before Installation To Ensure Proper Match.

Technical Information

• Manufacturer: Sanden
• Model: Citroën C4; Peugeot 207, Peugeot 307; Peugeot 308
• Product Codes: SD6V12, 1355F
• Additional Numbers: 9659875780, 6453WK, 6453WL, 648708, 9822826880, 1671553680, 6453QK

How The Part Functions

The Compressor Is The Heart Of The Vehicle’s Air Conditioning System. It Compresses Refrigerant Vapor And Pumps It Through The Condenser, Receiver/Drier And Evaporator To Remove Heat From The Cabin. The Electromagnetic Clutch Engages And Disengages The Compressor According To System Demand, Controlled By The Vehicle’s Climate Control Electronics.

How To Replace (Overview)

1) Recover Refrigerant With Appropriate Certified Equipment. 2) Remove Drive Belt And Disconnect Electrical Connector(s) To The Clutch. 3) Detach Suction And Discharge Lines (Cap And Replace O-Rings). 4) Unbolt Compressor From Bracket And Remove Unit. 5) Fit Replacement Compressor, Replace O-Rings And Seals, Reinstall Lines And Torque Fasteners To OEM Values. 6) Evacuate System To Recommended Vacuum, Refill With The Correct Refrigerant And Specified Lubricant Volume, Then Test For Leaks And Proper Operation.

Installation Recommendations

Recover Refrigerant Using A Certified Recovery Station Before Any Work. Replace Receiver/Drier Or Accumulator Whenever The Compressor Is Replaced To Prevent Contamination. Replace O-Rings And Use The Correct Type And Amount Of PAG Oil Specified For The Vehicle. Evacuate The System Thoroughly After Assembly To Remove Moisture And Air. Verify Belt Tension And Electrical Connections. Perform A Leak Test And Functional Test At Operating Temperature.

Reason Why The Part Most Often Fails

Compressor Failure Is Most Commonly Caused By Lack Of Lubrication (Oil Loss Or Incorrect Oil), Contamination In The A/C Circuit (Debris From A Failed Component), Excessive Wear Of Bearings Or Clutch, And System Leaks Leading To Moisture Ingress. Overheating From Restricted Condenser Or Poor Cooling Airflow Can Also Accelerate Wear. Regular Maintenance Of The Entire A/C System Helps To Minimize These Risks.

Practical Tips For Workshops And DIY Mechanics

Keep A Clean Working Environment To Prevent Foreign Material Entering The System During Replacement. Label And Inspect Lines And Electrical Connectors Before Disassembly. Use Only Approved Seals And Lubricants. After Installation, Run The System Through Several Operating Cycles And Check For Unusual Noises Which May Indicate Misalignment, Incorrect Oil Charge, Or Internal Damage.

Product Overview

The Sanden SD6C12 1367 air conditioning compressor is a direct-fit cooling compressor commonly used on a range of Citroën and Peugeot models. Designed to compress refrigerant and circulate it through the HVAC system, the unit is belt driven and engages via an electromagnetic clutch when the A/C is commanded on. This used unit offers a cost-effective replacement option for workshops and skilled DIYers who verify compatibility by product number.

Key Benefits

• Direct Fit For Multiple Models: Often interchangeable on a variety of PSA platforms when matching the product codes.
• Robust Sanden Design: Proven architecture with a wet lubrication system compatible with standard A/C oils used on these vehicles.
• Cost Effective Replacement: Salvaged unit with relatively low mileage source can reduce downtime and cost compared with new aftermarket options.

Technical Information

• Manufacturer: Sanden
• Model: SD6C12 1367
• Product Codes: 9678656080, 9822826880
• Additional Numbers: 6453ZZ, 648708, 648709, 648701, 1671553680
• Mileage: Removed From Vehicle With 64,000 Km
• Typical Refrigerant: Systems On These Models Commonly Use R134a

Recommended For Models

• Citroën Berlingo B9
• Citroën Berlingo III
• Citroën C3
• Citroën C3 Picasso
• Citroën C3 Pluriel
• Citroën C4
• Citroën C4 II
• Citroën C5
• Citroën C5 X7
• Peugeot 207
• Peugeot 308
• Peugeot Partner
• Peugeot Partner III
• Peugeot Partner Tepee
• Peugeot 508

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Avoid Electrical Damage.
• Recover Refrigerant Using Certified Recovery Equipment Or Have A Qualified Workshop Perform Recovery And Recharge.
• Remove Drive Belt, Disconnect Electrical Connector And Remove Mounting Bolts To Replace Compressor.
• Replace All A/C System O-Rings And The Receiver/Drier Or Accumulator When Replacing The Compressor To Prevent Contamination And Moisture Issues.
• Flush The System If There Is Evidence Of Contamination. Refill With Correct Type And Quantity Of Refrigerant Oil Specified For The Vehicle.
• Perform Vacuum And Leak Test Before Recharging The System. Verify Clutch Engagement And System Pressures During Initial Run.

Most Common Failure Reasons

• Clutch Wear Or Failure Causing Inability To Engage The Compressor.
• Bearing Wear Leading To Noise Or Seizure.
• Internal Leakage Or Loss Of Compression Due To Worn Seals.
• System Contamination From Metal Debris Or Moisture Leading To Rapid Compressor Damage.
• Insufficient Lubrication Or Incorrect Oil Causing Premature Wear.
• Drive Belt Or Tensioner Issues Affecting Compressor Drive.

Practical Notes

Because failures in A/C systems are frequently caused by contamination, it is best practice to inspect and, if necessary, service the expansion valve/orifice tube, dryer/accumulator and other A/C components when fitting a replacement compressor. Matching the exact product codes listed in the Technical Information increases the chance of a correct fit and reliable operation.

Product Overview

This Sanden SD6V12 air conditioning compressor is a direct-fit replacement commonly used on various Citroën and Peugeot models. It is a cost-effective option for workshops and DIY mechanics looking to restore cooling performance after a compressor failure. The unit is compatible with R134a systems and is often searched for by part numbers such as 1355F, 9659875780, 6453WK and related OEM references.

Technical Information

• Manufacturer: Sanden
• Models: Citroën C4; Peugeot 207; Peugeot 307; Peugeot 308
• Product Codes: 1355F; SD6V12
• Additional Numbers: 9659875780; 6453WK; 6453WL; 6453QK; 648708; 9822826880; 1671553680; R134A
• Removed Mileage: 88,000 km (unit removed from vehicle)

Installation Recommendations

• Have the refrigerant recovered and the system evacuated by a certified technician in accordance with local regulations.
• Inspect and replace the receiver/drier (or accumulator), expansion valve/orifice tube and all O-rings to prevent contamination and ensure proper sealing.
• Drain and measure the oil from the old compressor to determine the correct amount and type of PAG oil to add; always top up to the manufacturer-specified charge.
• Replace compressor mounting bolts and tighten to the manufacturer torque specifications. Check belt condition and tensioner, replace if worn.
• After installation, perform a deep vacuum (minimum 30 minutes depending on system size), leak test, and then recharge with the correct R134a refrigerant mass as specified for the vehicle.
• Verify electrical connector and clutch engagement function before final reassembly. Run the A/C system and check high/low pressures and cabin cooling performance.

Most Common Failure Reasons

• Clutch coil or electromagnetic clutch wear causing engagement failure.
• Worn bearings leading to noise and eventual seizure.
• Contamination from system failures (e.g., burst dryer, particulate ingress) causing internal damage.
• Loss of refrigerant/oil due to leaks, resulting in insufficient lubrication and overheating.
• Corrosion or damage to refrigerant lines and fittings leading to leakage and compressor overload.

Notes For Mechanics and DIYers

This compressor is suitable for professional workshops and experienced DIY mechanics. It is frequently located by its part numbers, so searching by any of the listed codes will improve the chances of finding the correct unit. Always follow manufacturer procedures and safety regulations when working on the A/C system.

Air conditioning compressor MAHLE SD6C12 – replacement for Sanden SD6V12 (PSA 1355F). Reliable air conditioning compressor/AC compressor for Citroën and Peugeot cars. Dismantled from a car with approx. 2,000 km, quiet operation and quick pressure build-up. Ideal as a direct replacement for a faulty original when looking for a part by number.

Key features
– Manufacturer and type: MAHLE SD6C12 (replacement for Sanden SD6V12, PSA designation 1355F)
– Condition: brand new, approx. 2,000 km
– Purpose: R134a air conditioning for selected Citroën/Peugeot models
– Identical mounting and connection geometry with the original for the specified OE numbers
– 12 V electromagnetic clutch included (standard for this type; check with label/photo)

Vehicle compatibility
– Citroën C4
– Peugeot 207, 307, 308
– And other PSA cars using the OE/OEM numbers below. Always verify by part number and VIN.

OE/OEM and cross search numbers
– 9659875780
– 6453WK
– 6453WL
– 9822826880
– 1671553680
– 1355F
– SD6C12 / SD6V12 (Sanden/MAHLE)

Technical information
– Construction: 6-piston compressor (SD6 series)
– Clutch power supply: 12 V
– Refrigerant: R134a
– Oil: PAG according to the specification of the car system (usually PAG 46; add the amount according to the manufacturer)
– Belt: grooved (PK) – compare the diameter and number of grooves with the original part
– Connecting hoses: O-rings, check the dimensions according to the label/photo
Note: Details (pulley diameter, number of grooves, orientation of outlets) may vary depending on the variant – follow the number on the label and the OE references.

Why choose a new MAHLE
– Quick and cost-effective replacement for the original Sanden 1355F SD6V12
– Minimal wear due to low travel
– OEM part quality, accurate mating surfaces and seals

Installation recommendations
– Before assembly, flush the system, replace the dehydrator/dryer and O-rings
– Check the amount and type of oil in the compressor, evacuate the system and fill with the correct amount of R134a
– Check the cleanliness and function of the expansion valve, check the pressure and suction lines
– After assembly, carry out a leak test and functional test

How to check compatibility
– Compare the OE number from the old compressor (label) with the above references
– If in doubt, check against the VIN and the manufacturer’s catalog

Are you looking for “Citroën/Peugeot A/C Compressor”, “PSA AC Compressor”, “MAHLE SD6C12” or “Sanden 1355F SD6V12”? This remanufactured piece is ready to be a direct replacement for the original for the listed models and OE numbers.

Product Overview

This Sanden SD6C12 1367 air conditioning compressor is a direct-fit replacement commonly used on a range of Citroën and Peugeot petrol and diesel models. The compressor is driven by the engine accessory belt and uses an electromagnetic clutch to engage the refrigeration circuit. Replacing a worn or failed compressor restores refrigerant circulation and cooling performance for the vehicle’s air conditioning system.

Key Benefits

• Direct fit for multiple Citroën and Peugeot applications listed below.
• Restores proper refrigerant compression and system pressure for effective cabin cooling.
• Supplied used but functional, inspected and ready for installation.

Compatibility

Typical fitment includes Citroën Berlingo B9, C3 II, C3 Picasso, C4, C5 III, DS3 and Peugeot 207, 307, 308, 508, Partner III. Always match part numbers listed in the Technical Information to confirm fitment for a specific vehicle model and engine variant.

Technical Information

• Manufacturer: Sanden
• Model: SD6C12 1367
• Product Codes: 9678656080, 9822826880, 982826880
• Additional Numbers: 6453ZZ, 6453.ZZ, 648701, 648708, 648709, 1671553680, 1364F, 1367F

Installation Recommendation

Installation should be performed by a qualified mechanic or an automotive workshop with air conditioning service equipment. Recommended steps include: properly evacuating the refrigerant, replacing the dryer/receiver and any vulnerable O-rings, flushing the system if contamination occurred, installing the compressor, performing a full vacuum and leak test, and recharging the system with the correct refrigerant and specified oil type and quantity. Refer to the vehicle service manual for the exact refrigerant type and oil capacity. Always follow standard safety procedures and disconnect the battery before starting mechanical work.

Why This Part Fails Most Often

Common causes of compressor failure include lubricant loss (insufficient oil), contamination from a failed clutch or internal wear, refrigerant leaks that lead to inadequate lubrication, seized bearings, or electrical/clutch faults preventing engagement. Contaminants circulating in the AC circuit (metal debris from a failing compressor) can lead to rapid failure of replacement components if the system is not thoroughly cleaned.

Signs You Need To Replace The Compressor

• Weak or no cooling from the air conditioning system.
• Unusual noises (grinding, rattling) from the compressor area.
• Compressor clutch not engaging while system is activated.
• Visible refrigerant or oil leaks near the compressor.

Practical Tips For Fitters and DIYers

• Verify all listed part numbers against the original compressor to ensure compatibility.
• Replace the receiver/drier and change oil when replacing the compressor to avoid contamination issues.
• Use proper personal protective equipment and AC service tools—refrigerant is under high pressure and requires certified handling.

Warranty And Condition

The unit is supplied used with a guarantee of functionality. Photos are illustrative. The part has been inspected for operational condition but may show cosmetic signs of prior use.

Known for its durability and consistent performance, the Sanden SD6V12 1364F compressor is often sought after with its specific product numbers. Over time, compressors can fail due to wear, oil leaks, or refrigerant contamination, which leads to diminished air conditioning efficiency or complete AC failure. Replacing a faulty compressor with this model restores optimal function, improving comfort and cabin air quality.

Installation typically involves removing the old compressor and replacing it with this unit, making sure to flush the AC system and replace the refrigerant and oil according to manufacturer specifications. Proper handling and fitting ensure long service life and trouble-free operation.

Technical Information:

• Manufacturer: Sanden
• Model: SD6V12 1364F
• Product Codes: 9671216280, 16171553680, 9822826880, 648708, 648709, 648701, 6453WL
• Additional Codes: Listed in short description

This compressor is compatible with Citroën Berlingo B9, C3 II, C3 Picasso, C4, C5 III, DS3, and Peugeot 207, 307, 308, 508, Partner III models. It’s a reliable choice for replacing worn-out or malfunctioning AC compressors, ensuring efficient air conditioning performance.

We provide thoroughly inspected and functional parts only, making this air conditioning compressor a safe investment for your automotive repair or maintenance projects. For installation guidance and further technical assistance, feel free to contact our customer support team—they’re ready to help you find the perfect match for your vehicle.

Choose quality and dependability with the Sanden SD6V12 1364F Air Conditioning Compressor and enjoy a comfortable driving experience even in the hottest conditions.