The airbag is available in the FXT – Black Cornelia style, which is perfect for maintaining the original aesthetics of your vehicle. Its installation is straightforward and uncomplicated, allowing for a quick and efficient replacement without the need for special tools or extensive professional intervention.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: CITROEN BERLINGO II
Product Codes: 96639595XT, 98158975XT, 4112KX
Other Numbers: FXT – BLACK CORNELIA
Color: Black

Exact knowledge regarding the frequency of airbag failures is not available, but being aware of regular maintenance and checking airbag systems can significantly contribute to your safety on the road. This part is carefully tested, and its functionality is guaranteed. Choose this used driver’s airbag and ensure your driving safety with confidence in this proven and affordable auto part.

For further information or orders, feel free to contact our customer support, which is available to assist you. Restore the functionality of the safety features of your Citroën Berlingo with this quality part. Orders are processed quickly, and the airbag is ready for shipment with options for rapid delivery to your workshop or home.

This driver airbag is a direct-fit safety module intended for Citroën Berlingo II vehicles. It contains the driver airbag cushion and inflator assembly and is designed to restore the frontal passive restraint after deployment or to replace a faulty module. Manufactured to match original mounting points and electrical connectors, the unit helps ensure correct deployment geometry and occupant protection when installed correctly. Commonly searched by part numbers such as 96454032XT and 96639595XT01, this airbag is suitable for workshops and experienced DIY mechanics who require a reliable replacement component.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën Berlingo II (B9) – From 2002
• Product Codes: 96454032XT, 96454032XT00, 96454032XT01, 96639595XT01
• Other Numbers: 4112GG, 98158975XT, 98032239MJ
• Color: FXT – Black Cornelie

Fitment And Application

Intended primarily for Citroën Berlingo II models from 2002 onwards. This driver airbag replaces the steering wheel airbag module and uses the factory mounting and electrical interface. Verify the part numbers listed in the Technical Information to confirm match with the vehicle’s original module before installation.

How To Replace

• Disconnect the negative battery terminal and wait at least 10 minutes to allow the SRS capacitors to discharge.
• Position the front wheels straight and lock the steering wheel to prevent rotation.
• Carefully remove the steering column trim and access bolts securing the airbag module on the steering wheel.
• Loosen and remove the retaining screws or bolts, then gently pull the airbag module away and disconnect the airbag electrical connectors (note locking tabs).
• Install the replacement module by connecting the electrical plugs and securing the module with original fasteners to the correct torque specified by the manufacturer.
• Reconnect the battery and use a diagnostic tool to clear SRS fault codes and verify airbag system readiness.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Prevent Accidental Deployment.
• Wait The Recommended Time After Battery Disconnection (At Least 10 Minutes) To Allow SRS Energy Storage Capacitors To Discharge.
• Handle The Airbag Module Carefully, Avoiding Any Impact, Heat Or Static Exposure To The Inflator And Connector Areas.
• Ensure Connectors Are Fully Seated And Locking Tabs Engaged; Inspect Wiring And Clock Spring (Spiral Cable) For Damage Before Reassembly.
• After Installation, Perform A Full SRS System Scan And Confirm That The Airbag Warning Light Clears; If Faults Persist, Diagnose With Appropriate PSA Diagnostic Tools.

Most Common Failure Reasons

• Deployment During A Collision — Airbags Are One-Time-Use Components After Activation.
• Damage To Clock Spring (Spiral Cable) Causing Intermittent Or Lost Electrical Connection To The Airbag.
• Corroded Or Damaged Connectors And Wiring Due To Moisture Ingress Or Poor Maintenance.
• Inflator Degradation Or Manufacturing Faults Leading To SRS Warning Lights Or Non-Deployment.
• Incorrect Installation Or Loose Fasteners Causing Electrical Faults Or Improper Positioning.

Notes

Airbag modules are critical safety components. While experienced mechanics and competent DIYers can perform replacements, correct handling, installation torque, and proper diagnostic verification are essential for occupant safety. Always follow manufacturer procedures and safety precautions when working on the SRS system.