This used complete instrument cluster is a direct-fit component for Peugeot 308 1.6 HDi models and is commonly searched by its product codes 9666649080 and 9806132480. Ideal for professional workshops and experienced DIY mechanics, the unit displays speed, engine RPM, fuel level, temperature and warning indicators in one compact module. Including original connectors and mounting points, it helps restore full dashboard functionality when the factory cluster is faulty or shows incorrect readings.

Key Benefits

– Direct compatibility with Peugeot 308 1.6 HDi (see technical information below for details).
– Supplied with original part numbers 9666649080 and 9806132480 for easy lookup.
– Saves time on dashboard repairs compared with troubleshooting individual gauges.
– Suitable for mechanics and competent car owners who perform cluster replacement and calibration.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 308 1.6 HDi
• Product Codes: 9666649080, 9806132480
• Other Numbers: Mileage/Reference: 71,606 Km / Internal Reference: 71600

Function And Typical Applications

The instrument cluster aggregates vehicle speed, engine RPM, fuel and coolant temperature, and warning lamps into a single dashboard module. It communicates with the vehicle CAN network to display active faults, service reminders and system warnings. Replacement is the common route when individual gauges fail, backlighting dims, LCD segments lose contrast, or the odometer malfunctions.

How To Replace

Replacement requires basic electrical skills and common tools. Typical procedure:

1. Disconnect the negative battery terminal before starting to avoid short circuits and protect vehicle electronics.
2. Remove trim panels around the steering column and dashboard to access the cluster mounting screws.
3. Unscrew the retaining bolts and gently pull the cluster forward to access wiring connectors.
4. Release connector clips and unplug the harnesses. Inspect connectors for corrosion or damage.
5. Fit the replacement cluster, reconnect all plugs, secure mounting screws and reassemble trims.
6. Reconnect the battery and verify basic functions and warning lights.

Installation Recommendations

• Always disconnect the battery before removing the cluster to prevent electrical damage.
• Handle connectors and PCB areas carefully; avoid applying pressure to the display or stepper motors.
• Check connector pins and wiring for corrosion or bent pins before installation.
• After installation, verify all indicators, backlighting and gauges operate correctly during a test drive.
• If instrument readings are inconsistent after fitment, calibration or coding may be required (see note below).

Note About Coding And Synchronization

In some cases a replacement instrument cluster can require synchronization or coding to the vehicle systems (immobilizer, mileage, or CAN parameters). This is more common when swapping clusters between different vehicles or replacing a cluster with different configuration. Professional diagnostic equipment for PSA vehicles (for example DiagBox) may be required to ensure full functionality.

Why This Part Usually Fails

Common failure causes for instrument clusters include:

• Worn stepper motors that drive analog needles (causes inaccurate or stuck gauges).
• Failing backlight LEDs or contrast loss in LCD areas (poor visibility).
• Cold or cracked solder joints on the circuit board due to thermal cycling.
• Water ingress or condensation leading to corrosion of contacts and connectors.
• Voltage spikes or poor battery/alternator regulation damaging electronic components.

Who Should Buy

Recommended for professional mechanics and experienced DIYers repairing Peugeot 308 dashboards. The listing is optimized for searches by part numbers 9666649080 and 9806132480 and for owners of the Peugeot 308 1.6 HDi looking to replace a faulty instrument cluster quickly and cost‑effectively.

Product Overview

Full instrument panel assembly suitable for Peugeot 308 1.6 HDi. This complete cluster includes speedometer, tachometer, fuel and temperature gauges, odometer and the usual set of warning lamps and backlighting. It was removed from a vehicle with the recorded mileage shown above and is intended for direct replacement in compatible 1.6 HDi models.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 308 1.6 HDi
• Product Codes: 9666649080, 9806132480
• Other Numbers: Recorded Mileage: 111 151 km

Compatibility And Fitment

Intended for Peugeot 308 1.6 HDi applications. Fitment depends on year and dashboard variant; commonly found on first‑generation 308 models. Confirm dash layout and connector shape when ordering to ensure a direct mechanical fit.

How To Replace

Replacement is straightforward for a competent mechanic or experienced DIYer. Typical steps:

• Disconnect the negative battery terminal before starting.
• Remove the trim surrounding the instrument cluster (careful with clips to avoid damage).
• Unscrew the mounting fasteners and carefully pull the cluster forward.
• Unplug electrical connectors and any illumination plugs; avoid pulling on wires.
• Install the new cluster by reversing the procedure, reconnect connectors and secure with screws.
• Reconnect the battery and verify basic function. Some vehicles may require diagnostics/coding to fully integrate the cluster.

Installation Recommendations

• Always Disconnect Battery: Prevent electrical damage by disconnecting the battery before removing the cluster.
• Handle With Care: Avoid touching circuit boards or components; use ESD precautions if possible.
• Clean Connectors: Ensure mating connectors are free of corrosion or dirt for reliable contacts.
• Coding And Mileage: If it is necessary to preserve vehicle mileage and settings, data cloning or proper coding may be required. Use PSA diagnostic tools (DiagBox/Lexia) or an experienced workshop to perform adaptations and final checks.
• Torque And Clips: Refit plastic trim and fixings without overtightening to prevent cracking the dash bezel.

Why This Part Most Often Fails

• Electronic Component Wear: Stepper motors for gauges, and aging capacitors or solder joints, can degrade over time.
• Moisture And Corrosion: Water ingress or high humidity causes connector corrosion and PCB faults.
• Voltage Spikes And Poor Electrical Supply: Jump‑starting, charging faults or bad battery connections can damage internal electronics.
• Backlight And Illumination Failures: Bulb/LED aging and driver faults affect readability at night.
• Mechanical Damage: Impact or improper removal can break shafts, mounts or connectors.

Practical Notes

This is a complete cluster removed from a vehicle and supplied with the recorded mileage shown. It is suitable for mechanics and experienced DIYers who understand the need for careful handling and potential diagnostic/coding work after installation. If you require mileage preservation or adaptation to the vehicle immobilizer and settings, plan for diagnostic time using PSA tools.

Description

Original instrument cluster (speedometer / tachometer) suitable for Peugeot 308 1.6 e-HDi models from around 2010. The unit displays vehicle speed, engine RPM, fuel level, coolant temperature and contains on-board warning lights and the odometer. This listing is ideal for professional mechanics and experienced DIYers looking for a direct replacement cluster with the referenced part numbers for quick identification.

Key Features

• Direct fit for applicable Peugeot 308 1.6 e-HDi vehicles
• Displays Speedometer, Tachometer, Odometer, Fuel Gauge and Warning Indicators
• OEM Reference Numbers Included For Fast Search: 9666649080, 9806132480
• Approximate Mileage Shown On Unit: 115000 km
• Suitable For Use By Workshops And Skilled Home Mechanics

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 308 1.6 e-HDi (2010)
• Product Codes: 9666649080, 9806132480
• Other Numbers: 115000 (Displayed Mileage On Unit)

Compatibility

Designed for Peugeot 308 diesel 1.6 e-HDi models of the same generation and instrument cluster family. Use the OEM product codes listed above to match the part with the vehicle’s existing cluster. Matching part numbers improves the chance of a plug-and-play replacement, but differences can exist between equipment levels and model years.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Avoid Short Circuits And Damage To Electronics.
• Remove Trim Panels And Steering Column Shroud To Access The Cluster. Typically The Cluster Is Secured By Fasteners Accessible From Behind The Dash Fascia.
• Unscrew The Mounting Bolts, Carefully Pull The Cluster Forward And Unplug Electrical Connectors. Note Connector Orientation And Any Retaining Clips.
• Install The Replacement Unit By Reversing The Removal Steps. Ensure Connectors Are Fully Seated And Fasteners Are Tightened To Manufacturer Spec.
• After Installation, Perform A Full Functional Check: Illumination, Gauges Movement, Warning Lights And Odometer Readout.
• In Some Cases The Cluster May Require Initialization Or Coding With PSA Diagnostic Tools (DiagBox/Lexia) To Ensure Full Communication With Vehicle Electronics.

Why Instrument Clusters Fail

Common failure causes include:

• Faulty Stepper Motors Or Gauging Mechanisms Causing Sticking Or Inaccurate Needle Movement.
• LCD Or Backlight Failures Resulting In Dim Or Blank Displays.
• Cold Or Cracked Solder Joints And Printed Circuit Board Issues Due To Thermal Cycling.
• Moisture Ingress Or Corrosion From Condensation Or Water Damage.
• Electrical Surges Or Short Circuits Affecting Internal Electronics.

Laboratory And Workshop Notes

When replacing an instrument cluster, document the original unit’s odometer reading and take photos of connectors for reference. If uncertain about vehicle coding or immobilizer interactions, schedule the final setup with a workshop equipped with PSA diagnostic tools.

Recommendation For Fitment

Use The Provided Product Codes To Search Parts Databases And Confirm Visual Match With Your Existing Cluster. The unit Is Intended For Mechanics And Competent DIYers Comfortable With Dashboard Disassembly.

Additional Information

Category: 308 | Electrical Components | Instrument Clusters

Product Overview

High-quality instrument cluster for Peugeot 308 1.6 e-HDi (2011) with an indicated mileage of approximately 166,000 km. This speedometer assembly includes tachometer, speed display, fuel and temperature indicators, and all associated warning lights. Ideal for mechanics and experienced DIY enthusiasts searching by part numbers 9666649080 or 9806132480.

Key Benefits

• Direct fit for the specified model—matches original mounting points and connector layout.
• Restores full dashboard readouts: speed, engine RPM, fuel level and coolant temperature, plus warning lamp indications.
• Commonly searched by OEM numbers 9666649080 and 9806132480, improving findability in parts catalogs and search engines.
• Spares time compared with diagnosing individual sensors when the cluster itself is the fault.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 308 1.6 e-HDi (2011)
• Product Codes: 9666649080, 9806132480
• Other Numbers: Odometer Reading Approximately 166000 km

Installation Recommendations

Before starting work always disconnect the vehicle battery and wait a few minutes to ensure systems are fully powered down. Remove surrounding trim carefully to avoid breaking clips. Unscrew mounting fasteners and gently unplug electrical connectors—do not pull on wiring. Inspect connector pins and harness for corrosion or damage and clean contacts if necessary. Refit in the reverse order, ensuring connectors are fully seated. After installation, verify all gauges and warning lights function correctly. If illumination or certain functions are inactive, check fuses and dimmer settings before replacing the unit.

Common Failure Causes

• Worn Stepper Motors Or Actuators Causing Inaccurate Gauge Readings.
• Faulty Backlight LEDs Or Illumination Circuits Resulting In Dim Or Dead Display.
• Moisture Ingress Or Corrosion Leading To Intermittent Electrical Faults.
• Electrical Surges Or Loose Solder Joints Causing Partial Or Total Cluster Failure.
• Connector Contact Issues Or Wiring Harness Damage Causing Loss Of Signals.

Notes For Mechanics And DIYers

When sourcing a replacement cluster by part number (9666649080, 9806132480), confirm board layout and connector positions match the original unit before fitting. Keep in mind that instrument clusters are precision assemblies—handle PCB and displays carefully to avoid static or mechanical damage. For vehicles where additional configuration is necessary, use appropriate diagnostic tools and procedures recommended for Peugeot vehicles.

Are you looking for a reliable replacement for the tachometer in your Peugeot 308? Our used tachometer for the 2011 Peugeot 308, with approximately 122,000 km, is an ideal choice for mechanics or DIY enthusiasts seeking a quality and verified part at a reasonable price. With the original part numbers 9805625380 or 9806132480, perfect compatibility with your vehicle is ensured.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 308
Product Codes: 9805625380, 9806132480
Additional Numbers: Tachometer, instrument cluster

This tachometer falls under the category of electronic components and has been carefully dismantled from a vehicle with a focus on maintaining its original functionality. The gauges and instrument cluster are essential for accurately measuring and displaying speed, mileage, and other important information while driving. We have thoroughly ensured its functionality, confirming that this part meets all technical requirements for seamless use.

By purchasing this tachometer, you not only acquire a reliable part but also the peace of mind that your vehicle will continue to provide accurate information about your journey. This part is ideal for those seeking an economical alternative to new parts without compromising on quality and functionality. You can rest assured that you are getting a product that meets your expectations and needs.

Note: Please ensure you check the compatibility of the tachometer with your vehicle before purchasing.

This tachometer functions perfectly, accurately displaying the traveled distance, speed, and other crucial information necessary for safe and comfortable driving. It is an essential component for the proper operation of your vehicle, especially if the original unit is worn or damaged.

Technical Information:

Manufacturer: PSA Citroen Peugeot
Model: Peugeot 308 1.6 HDI, Year 2010
Product Codes: 9665107480, 610335, 9806132480

This tachometer can be easily installed by most mechanics or home DIY enthusiasts with basic automotive service skills. The lifespan of this part typically extends over a long period without the need for further maintenance, depending on the vehicle’s overall condition and usage.

By purchasing this tachometer, you obtain a functional and visually acceptable part that ensures your Peugeot 308 is equipped with an important component to help you keep track of your driving and provide comfortable vehicle operation. Restore your vehicle’s proper function with this quality used automotive part.

This used odometer, designed specifically for the Peugeot 308 model, is an excellent choice for those seeking a reliable replacement instrument cluster. This vital component ensures accurate display of vehicle speed, total mileage, and essential driving data needed by the driver. With recorded mileage of 114,135 km, you can trust in its proven history and functionality.

The product comes with original part numbers 9665107480 and 610335, guaranteeing compatibility with your vehicle’s specifications and smooth installation. Replacing this part is generally straightforward and does not require special tools, making it convenient for both professional mechanics and car enthusiasts performing DIY repairs.

Technical Information:

• Manufacturer: PSA Peugeot Citroen
• Model: Peugeot 308
• Product Codes: 9665107480, 610335, 9806132480

Choosing this odometer helps maintain your vehicle’s performance and supports sustainability by reusing a part that might otherwise be discarded. The documented mileage provides confidence in a well-maintained and fully functional component. Equip your Peugeot 308 with a quality odometer that is both economical and environmentally conscious.