High-quality replacement electric door lock actuator designed for the right rear (passenger-side) door of the Peugeot 308. Ideal for professional mechanics and DIY enthusiasts who need a direct-fit solution for central locking faults. This unit restores reliable locking and unlocking via key fob and door switches, reduces rattles and prevents security issues caused by a failing actuator. Commonly searched by part numbers listed below, it is a frequently required spare for late-model 308 vehicles.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: Peugeot 308 (Passenger-Side Rear Door)
• Product Codes: 567164, A01521, 9800617480, 9138Q8
• Additional Numbers: 006174, A05002

Function and Application

This electric actuator operates the central locking mechanism on the right rear door. It converts electrical signals from the central locking system into mechanical movement to lock and unlock the door latch. The actuator is integrated with the door latch assembly and ensures secure closure and remote locking function. It is suitable for Peugeot 308 models equipped with electric central locking on the rear passenger-side door.

Common Failure Causes

Actuator failures are usually caused by mechanical wear of internal gears, motor burnout, corrosion from water ingress, or broken linkages/connectors. Symptoms include intermittent locking/unlocking, grinding or clicking noises inside the door, inability to lock/unlock the door with the remote or switch, and increased effort to operate the latch manually.

Replacement and Installation Recommendations

• Always disconnect the battery before starting work to avoid electrical short circuits and to protect vehicle electronics.
• Remove the inner door trim and protective moisture barrier carefully to access the latch and actuator. Keep all fasteners and trim clips organized for reassembly.
• Disconnect the electrical connector and any linkage rods attached to the actuator. Note the orientation and routing of linkages for correct reinstallation.
• Install the new actuator, reconnect linkages and electrical connector, and verify smooth mechanical movement before refitting the door trim.
• After installation, test locking/unlocking with both the key fob and door switch several times to confirm proper operation. Lubricate latch points with appropriate grease to reduce wear.
• If water ingress or corrosion is found, address the sealing issue (replace seals or reattach moisture barrier) to prevent premature failure of the new unit.

When To Replace

Replace the actuator when you notice persistent operation faults (intermittent function or noise), failure to lock/unlock, or visible damage. Lifespan depends on usage and exposure to moisture; many units fail after several years, especially in vehicles exposed to wet environments.

Why This Part Adds Value

Fitting a correct part-number match (see Product Codes above) ensures direct compatibility and restores factory central locking behavior. Using the right actuator reduces workshop time, avoids repeated repairs, and secures vehicle access.

This electric door lock assembly is designed for the right rear passenger door of the Peugeot 308 and replaces the factory central locking latch. Built to restore reliable locking and unlocking by mechanical latch action and electric actuator, it is ideal for professional workshops and experienced DIY mechanics who service Peugeot vehicles. The part is often searched by product codes such as 9800617480, 732074, A04068 or 9138Z7 — include these references when looking for a match.

Function and Benefits

The unit combines a mechanical latch and an electric actuator to operate the central locking mechanism. It secures the door, engages with the striker on the body, and receives lock/unlock signals from the central locking system. Replacing a worn or faulty latch restores proper door closing, prevents accidental opening while driving and ensures correct central locking operation.

Replacement Procedure (Overview)

Removal and fitting are straightforward for a trained technician or competent DIYer with basic door trim experience. Typical steps:

• Remove interior door card and any moisture barriers to access the latch mechanism.
• Disconnect the electrical connector from the actuator and detach linkage rods or cables from the latch.
• Unscrew the latch unit from the door shell (usually Torx or hex fasteners) and remove the old unit.
• Install the replacement latch in position, secure fasteners to specified torque, reconnect linkage and wiring, and re-fit the door trim.
• Cycle the central locking several times to verify correct operation and adjust linkages if necessary.

Tools And Tips

• Common tools: Torx set, screwdrivers, trim tools, pliers. A small socket set may be required.
• Inspect clips, cables and the wiring connector when fitting — damaged linkages or corroded connectors should be repaired to avoid repeat failures.
• Apply light, appropriate lubricant to moving parts of the latch after installation for smooth operation.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 308 (Right Rear Passenger Door)
• Product Codes: 9800617480, 732074, A04068, 9138Z7
• Additional Numbers: 9138.Z7

Installation Recommendations

• Disconnect the battery before working on door electrics to avoid short circuits and prevent accidental actuator operation.
• Follow manufacturer procedures for door trim removal to prevent damage to clips and panels.
• Ensure connectors are clean and fully seated; repair any frayed wiring or corroded terminals.
• After fitting, verify door alignment and striker engagement. Test central locking from all entry points (remote, interior switch, manual key) to confirm correct function.

Why This Part Fails Most Often

Common causes of failure include mechanical wear in the latch mechanism, water ingress leading to corrosion, deterioration of plastic parts or linkages, and motor/actuator failure due to age or electrical faults. Repeated moisture exposure or accumulation of dirt inside the door can accelerate wear. Addressing source issues (such as leaking seals or faulty drainage) helps prevent repeat failures.

Suitable For

Intended for use on Peugeot 308 models requiring a right rear passenger door central locking latch. Check the product codes listed above against the vehicle’s parts references to confirm fitment before ordering.