Description

This right rear tail light (rear lamp) is designed for Peugeot 207 hatchback models with LED rear lighting introduced in 2010. Ideal for professional garages and DIY mechanics looking to replace a damaged or non-functioning lamp, this unit restores full rear lighting functionality including position/tail, brake and indicator functions (LED version). The listing includes the common OEM/product references used when searching: 9686565980 and 6351HQ.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 207 3-Door / 5-Door (From 2010, LED)
• Product Codes: 9686565980
• Other Numbers: 6351HQ

Compatibility & Search Tips

Fits Peugeot 207 hatchback versions offered in LED rear lamp configurations starting in 2010. This part is frequently searched by the OEM numbers 9686565980 and 6351HQ—include these codes in your search to quickly find the matching listing. Check the lamp shape and connector type on your vehicle to ensure a match with the photos/specifications.

Installation Recommendations

Replacement is straightforward for a competent mechanic or experienced DIYer. Basic tools required: trim tool or flat screwdriver, 10 mm socket or spanner, and a ratchet. Typical steps:

• Disconnect the vehicle battery before beginning work to avoid short circuits.
• Open the boot and remove the interior trim panel to access the tail light mounting nuts.
• Unscrew the mounting nuts, carefully pull the lamp assembly outwards and disconnect the wiring connector.
• Fit the new lamp, reconnect the connector, test all light functions (tail, brake, indicator) before refitting trim and fastening nuts.

Observe manufacturer guidance for torque values and safety precautions. If access is restricted by trim clips, use proper trim removal tools to avoid damage.

Why This Part Most Often Fails

• Mechanical Damage: Rear impacts and bumps commonly crack the lens or break mounting tabs.
• Moisture Ingress: Water or condensation can enter the housing, causing corrosion of contacts or failure of LED modules.
• Connector Corrosion or Wiring Faults: Poor contacts and damaged wiring can interrupt power to the lamp.
• Thermal Stress and Aging: Over time, seals and internal components can degrade, especially if previous repairs compromised the housing seal.

Practical Notes For Buyers

If the lamp has been removed from a vehicle, inspect mounting points and connector pins for damage or corrosion prior to installation. When replacing an LED tail lamp, verify that the vehicle’s body wiring and fuses are in good condition—LED faults are sometimes caused by upstream electrical issues rather than the lamp itself. Use the OEM numbers listed above to confirm visual and connector compatibility.

Recommended For Installation

Performed by: Professional Auto Technicians Or Experienced DIY Mechanics. Typical Time: 20–40 minutes per side depending on access and vehicle trim.

Description

High-quality replacement bulb socket designed for the right rear tail light of Peugeot 207 (3- and 5-door). This direct-fit socket restores secure electrical contact and correct bulb positioning in assemblies used from 2010 on models equipped with LED lighting. Ideal for professional garages and DIY enthusiasts who need a reliable, easy-to-install part identified by common OE references.

Benefits And Application

• Direct Replacement: Designed to match original geometry and electrical contacts for an accurate fit.
• Durability: Resistant to vibration and temperature variations typical of rear light assemblies.
• Service Friendly: Replaces worn or corroded sockets that cause intermittent lighting or failure.
• SEO Keywords: Peugeot 207 bulb socket, rear tail light socket 9686565980, 6351HQ, right rear lamp socket.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 207 3-Door And 5-Door
• Product Codes: 9686565980, 6351HQ
• Additional Numbers: 6351HQ (alternate reference)

Installation Recommendations

Intended for fitment by trained technicians or experienced DIYers. Typical replacement steps:

• Switch Off Ignition And Remove Key. For added safety, disconnect the battery negative terminal when working on vehicle electrics.
• Open Tailgate And Remove Interior Trim Or Access Panel To Reach The Rear Lamp Assembly.
• Unscrew Or Unclip The Lamp Unit From The Body, Then Access The Bulb Socket From The Rear Of The Assembly.
• Unplug The Wiring Harness Connector, Release Any Retaining Clips And Twist/Pull The Old Socket Out Of The Lamp Housing.
• Install The New Socket Ensuring Correct Orientation, Reconnect The Harness And Secure Clips Or Screws. Replace Bulb If Damaged.
• Reassemble Trim And Test All Light Functions (Brake, Tail, Indicator, Reverse As Applicable) Before Finalizing.
• Use Dielectric Grease On Contacts If Exposed To Moisture To Improve Longevity And Prevent Corrosion.

Why This Part Fails Most Often

• Corrosion Of Electrical Contacts Caused By Moisture Ingress Or Damaged Seals.
• Heat Damage From Overheated Or Incorrect Bulbs Causing Plastic Deformation.
• Mechanical Wear Or Vibration Leading To Poor Contact Or Cracked Housing.
• Contaminants Or Salt Exposure Accelerating Electrical Failure In Regions With Winter Road Treatment.

Notes For Professionals

This socket is commonly sought under OE numbers 9686565980 and 6351HQ. When replacing, check the lamp housing seals and bulb condition—replacing the socket without addressing a leaking housing or a failing bulb may lead to repeated faults. After installation, verify full functionality of the rear light cluster.