High-quality replacement left exterior mirror designed for Citroën C4 Picasso and Grand Picasso models. This electrically adjustable and heated unit with integrated approach/puddle light restores full functionality and comfort to the driver side door. Ideal for professional workshops and competent DIY mechanics looking for a direct-fit spare part referenced by product codes 96851519XY, 8153VS and 8153H6. Precise connector layout (14 pins arranged 6+5+3) simplifies installation on vehicles equipped with compatible door harnesses.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 Picasso, Grand Picasso
• Product Codes: 96851519XY, 8153VS, 8153H6
• Other Numbers: EZW, NFP
• Position: Driver Side (Left)
• Connector: 14-Pin (6+5+3)
• Features: Electrically Adjustable, Heated Glass, Approach/Puddle Light
• Color: EZW – Grey FER Paint (Other Colors Available)

Installation Recommendations

Before starting the job, prepare basic tools: trim removal tools, Torx/Screwdriver set and a small ratchet. Remove the interior door trim or the triangular trim cover to access the mirror mounting screws and electrical connector. Disconnect the 14-pin connector carefully by releasing any locking tab. Unscrew the mounting bolts and remove the old mirror. Position the replacement unit, tighten mounting bolts to the manufacturer’s torque specification, plug in the connector and check all functions (adjustment, heating, puddle light). Refit trim panels. If the vehicle has power locking or advanced door modules, follow manufacturer procedures and modern safety practices. When working on electrical components, isolate the circuit if recommended by the vehicle manual.

Replacement Procedure

• Park vehicle on level surface and switch ignition off.
• Remove interior triangular trim to expose mirror mount. Use plastic trim tools to avoid damage.
• Unplug the 14-pin connector (6+5+3) and undo the mirror mounting bolts.
• Remove old mirror and fit new mirror in position, ensuring correct orientation of the connector.
• Tighten mounting bolts to spec, reconnect connector and test electrical functions: mirror motors, heater, and approach light.
• Reinstall trim panels and verify door operation and fitment.

Why The Part Fails Most Often

Exterior mirrors typically fail due to direct impact (collision or parking damage), corrosion or broken pins in the connector, water ingress damaging motors or heater elements, and internal gear wear from frequent adjustment. Puddle/approach lights can fail from moisture exposure or LED/module degradation. Paint and casing damage is common in urban parking environments.

Notes For Mechanics And DIYers

Search by product codes 96851519XY, 8153VS or 8153H6 when looking for direct-fit replacements. Confirm the connector pinout (14-pin 6+5+3) before installation to avoid mismatch. If other mirror functions on the vehicle behave irregularly after replacement, inspect door wiring harness and connectors for corrosion or damaged pins.

Product Summary

High-quality left exterior mirror designed for Citroën C4 Picasso and Grand Picasso models. This electrically controlled, heated mirror includes an integrated puddle/approach light and a 14‑pin connector arranged as 6+5+3. Finished in EXY Black Onyx paint, it is a direct-fit replacement for damaged or faulty driver-side mirrors. Commonly searched by OE numbers 96851519XY, 8153VS and 8153H6, this unit is suitable for professional workshops and DIY car owners who require a reliable and complete mirror assembly.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C4 Picasso, Citroën Grand Picasso
• Product Codes: 96851519XY, 8153VS, 8153H6
• Additional Numbers: EXY / EXYB (Paint Code Black Onyx), 14‑Pin Connector (6+5+3)

Functions And Features

• Electric Adjustment: Multi‑directional motor for mirror glass positioning.
• Heating Element: Integrated demist/heater to clear condensation and ice.
• Puddle/Approach Light: Illuminates ground beside the door for safety and convenience.
• Fold Mechanism: Manual or electric folding depending on vehicle equipment (verify connector functions).
• Connector: 14 pins grouped as 6+5+3 – supports motors, heater, lighting and any additional sensors fitted to the original assembly.

Replacement Procedure

Recommended Steps For Removal And Installation:

1. Park Vehicle On Level Surface And Engage Parking Brake. Disconnect The Battery Before Starting Work To Avoid Short Circuits And Airbag/System Faults.
2. Remove Interior Door Trim Or Mirror Cover To Access Mirror Mounting Bolts And Electrical Connector. Carefully Pry Off Trim Using Appropriate Trim Tools To Avoid Damage.
3. Disconnect The 14‑Pin Connector By Releasing Any Locking Tabs. Note Connector Orientation For Reinstallation.
4. Unscrew The Mounting Bolts Securing The Mirror To The Door And Carefully Remove The Mirror Assembly From The Door.
5. Fit The New Mirror Assembly Into Position, Secure Mounting Bolts To Manufacturer Torque Specs, And Reconnect The 14‑Pin Connector.
6. Reassemble Door Trim Or Mirror Cover. Reconnect The Battery And Test All Functions: Adjustment, Heating, Folding And Puddle Light.

When Replacing The Mirror, Verify That The New Unit Matches The Original Connector Layout And Functions (Heater, Puddle Light, Folding Motor). If Any Functions Do Not Operate, Recheck Connector Pins And Wiring For Damage Or Corrosion.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Prevent Electrical Damage.
• Use Proper Trim Removal Tools To Avoid Breaking Clips Or Interior Panels.
• Tighten Mounting Bolts To The Vehicle Manufacturer’s Specified Torque.
• After Installation, Check Mirror Adjustment Range, Heating Operation, Folding Mechanism And Puddle Light Functionality.
• If Electrical Functions Fail, Inspect The Connector For Bent Pins, Corrosion Or Water Ingress And Repair Wiring Harnesses As Needed.

Why This Part Fails Most Often

Exterior mirrors typically fail due to impact damage (parking knocks, collisions) or progressive electrical/water ingress issues. Common failure modes include broken mirror housing or glass after impact, motor failure for adjustment, heater element burnout, corroded connector pins causing intermittent or total loss of function, and damaged wiring at the folding pivot. The puddle light and internal wiring are also susceptible to moisture penetration, especially around seals and grommets.

Notes For Mechanics And DIYers

This mirror is a complete assembly intended for direct replacement. It’s often located by OE numbers 96851519XY, 8153VS and 8153H6, so adding these codes to search queries speeds up finding the correct unit. Because door mirrors are exposed components, check surrounding wiring and seals when fitting the new assembly to avoid repeat failures.