Left rear headlight (outer part on fender) for Peugeot 3008 first generation (T8). Original used part from PSA production, ideal as a replacement for a damaged or oxidized light. Fits OEM numbers 9683460880 and PSA 6350HC. Supplied without bulb socket – use the original one, or can be purchased separately.

This left rear light module ensures visibility and safety: the tail and brake lights as well as the direction indicator are located in the outer part of the fender (reversing and rear fog lights are usually in the inner lamp in the trunk lid on the 3008). Thanks to the exact OEM design, it fits into the original mounts, sits on the body seal and connects with the original connector without modifications. Correct function and tight fitting helps prevent leaks and MOT errors.

The replacement of the rear lamp is most often done after a minor impact, broken glass, broken holders, fogging or fogging or loss of brightness of reflective surfaces. The replacement is quick and manageable at home: after opening the trunk, the inner cover is removed, the connector is disconnected, the fixing nuts/bolts are loosened, the lamp is pushed out of the guides, the bulb socket is transferred and the new part is seated and tightened. Before final tightening, we recommend checking the seals and checking all light functions after assembly.

Technical information
Manufacturer: PSA / OEM
Model: Peugeot 3008 I (T8), usually pre-facelift cars; always verify by part number
Product codes: 9683460880, 6350HC, 6350.HC
Other numbers: OE/OS: 9683460880 (OEM), PSA: 6350HC

Always confirm compatibility by comparing the part number and shape with the original headlight in the car. If you are unsure, we recommend checking by VIN. Thanks to the original design, you get a precise fit, the right optics and a long service life – a quick, clean and safe repair without the need to modify the electrical installation.

Original rear left lamp bulb socket for Peugeot 3008 first generation (T84). This bulb holder replaces a worn or damaged part and restores the reliable function of the rear lights. Thanks to the OEM code 6350.HC (6350HC) and the number 9683460880, you can easily verify the correct match with your car.

The socket ensures the attachment and electrical connection of the bulbs for the position, brake, direction and rear fog lights on the left side. In older cars, a burnt-out contact, corrosion of the surfaces or a loose bulb is a common problem – the result is light outages or a malfunction message on the instrument panel. Replacing the base itself is a quick and cost-effective solution compared to a complete replacement of the entire lamp.

When the socket leaves: typically after prolonged exposure to moisture, when the lamp is leaking, or after using bulbs with inappropriate wattage. Manifestations include irregular flashing of the turn signal, non-functioning brake or marker light or local overheating and browned contacts.

Installation: access is from the luggage compartment. Disassemble the cover, loosen the lamp fixing nuts, pull out the complete light, disconnect the connector and remove the base from the lamp body (usually secured with latches). Before fitting a new socket, we recommend checking the lamp seal, cleaning the connector and replacing the bulbs with quality 12V pieces of the same wattage. After installation, test all functions of the left rear light.

Pay attention to the orientation: it is the left (driver’s) side. Not to be confused with the right socket – it has a different layout. Designed for the first generation Peugeot 3008 (model years 2009-2016), including HYbrid4 versions with the same rear lamp.

Technical information

• Manufacturer: PSA Peugeot Citroën (OEM)
• Model: Peugeot 3008 I (T84), 2009-2016, rear left lamp
• Product codes: 6350.HC, 6350HC
• Other numbers: 9683460880

Advantages of the original socket: precise fit into the lamp body, correct contact routing and reliability. If you’re dealing with repeated blown bulbs, oxidation, or taillight error reports, replacing the socket is a quick way to permanently fix the problem and ensure that your brake, side, turn, and fog lights are working as they should again.