This genuine-style right door mirror is designed for Peugeot 207 models and offers electric adjustment, heating and an integrated temperature sensor for reliable visibility in adverse conditions. The mirror comes in color code KKN (Red Aden) — note that the red painted area may show slight peeling. Supplied with a 9-pin connector (arranged as 4+5), it replaces the complete assembly on the passenger door and is suitable for professional workshops and DIY mechanics who require a direct-fit replacement by product reference 96806501XT / 8149ZH.

Technical Information

• Manufacturer: Stellantis
• Model: Peugeot 207
• Product Codes: 96806501XT, 8149ZH
• Other Numbers: KKN (Color Code)
• Location: Right / Passenger Door
• Connector: 9-pin (4+5)
• Main Functions: Electric Adjustment, Heated Mirror, Ambient/Temperature Sensor

Installation Recommendations

1. Prepare Tools: Trim tools, Torx/screwdriver set and appropriate sockets for door mirror bolts.
2. Safety First: Disconnect the battery before starting work to avoid electrical short circuits or accidental airbag deployment on doors equipped with side airbags.
3. Remove Door Trim: Carefully remove the interior door trim/cover to access the mirror mounting points and electrical connector.
4. Disconnect Wiring: Unplug the 9-pin connector (note pin grouping 4+5) and any additional clips; label connectors if needed.
5. Unbolt Mirror: Remove the mounting nuts/bolts holding the mirror to the door, support the mirror to prevent damage when removing fasteners.
6. Fit New Mirror: Position the replacement mirror, secure mounting bolts to factory torque values, reconnect the wiring and test electrical adjustment and heating before refitting the trim.
7. Final Check: Verify mirror adjustment, heating function, and sensor behaviour. Refit trim panels and reconnect the battery.

Why This Part Most Commonly Fails

• Water Ingress: Moisture penetration can corrode internal motor contacts or heating elements, causing intermittent or permanent failure.
• Mechanical Wear: Repeated use leads to motor and gearbox wear, reducing movement accuracy or causing complete motor failure.
• Impact Damage: Side impacts or knocks often crack housings, break mounting points or misalign internal gears.
• Paint Degradation: The red painted surface (KKN – Red Aden) can flake or peel over time, affecting appearance but not electrical function.
• Connector/Pin Issues: Bent pins or damaged wiring in the 9-pin plug cause loss of heating, sensor signal or adjustment control.

Additional Notes

When replacing, check the condition of door mounting studs and wiring harness for damage. Test all mirror functions (adjustment range, heated element and sensor response) before completing installation. Using the exact product codes 96806501XT and 8149ZH improves the chance of correct fitment for Peugeot 207 vehicles. Ideal for professional fitters and experienced DIY mechanics seeking a direct replacement assembly.

Looking for the right side mirror for your Peugeot 207? This high-quality replacement mirror offers reliable functionality and enhances the aesthetic appeal of your vehicle. Equipped with electric controls, it allows easy adjustment of the mirror position from the driver’s seat. The built-in heating feature ensures quick defrosting during cold months, maintaining clear visibility. Additionally, the temperature sensor supports safety by helping to keep the mirror surface free from ice and fog regardless of weather conditions.

The mirror comes in an attractive gray KTP (Shark) finish, adding a modern touch to your car’s exterior. Installation is straightforward and suitable both for experienced mechanics and DIY enthusiasts with basic skills. Peugeot 207 is a well-regarded model known for its dependability, and fitting this mirror guarantees lasting performance and style for many miles.

Technical Information

• Manufacturer: Peugeot
• Model: 207
• Product Codes: 96806501XT, 8149ZH
• Additional Numbers: KTP

This replacement mirror meets all necessary functional standards and vehicle safety regulations. It is an excellent choice for anyone seeking a durable and visually appealing spare part at a reasonable price point. Order this essential component today to improve your driving experience and maintain your vehicle’s original design.

The mirror features the distinct Inari Blue color (code KGZ), matching precisely the Peugeot 207’s aesthetics. It shows minor cosmetic scratches that do not impact its functionality. This part is highly sought after both by professional mechanics and DIY enthusiasts repairing Peugeot vehicles.

Side mirrors are exposed to external elements, making them vulnerable to wear and damage over time due to impacts, weather conditions, or general usage. Regular inspection and timely replacement of the mirror guarantee optimal rear visibility and safer driving experience.

Installing this mirror is straightforward: disconnect the vehicle battery for safety, remove the interior door panel to access the mirror mounting screws, unplug the electrical connectors for the heating and adjustment features, then replace the old mirror with this genuine part and reconnect all components. This ensures a secure fit and full functionality.

Technical Information

• Manufacturer: Peugeot
• Model: 207
• Product Codes: 96806501XT, 8149ZH
• Additional Codes: KGZD

This mirror is an affordable and environmentally responsible choice, helping to reduce automotive waste by reusing quality components. Regardless of whether you are a seasoned professional or repairing your vehicle yourself, this genuine Peugeot part ensures durability and maintains your car’s original performance.

We offer a high-quality used right side mirror designed for Peugeot 207 models. This replacement part is ideal for professional car mechanics and DIY enthusiasts who prefer to repair their vehicles independently. The mirror features electric control and heating, enhancing comfort and safety during cold weather driving. The built-in temperature sensor provides additional functionality to improve your driving experience.

Despite being used, the part is in very good condition with minor cosmetic blemishes such as light surface scratches that do not affect full functionality. The finish in elegant Thorium Grey (color code KTH) adds a stylish look to your vehicle.

Technical Information:
Manufacturer: PSA Peugeot Citroën
Model: Peugeot 207
Product Codes: 96806501XT, 8149ZH
Additional Codes: KTH (color code)

This right side mirror is easy to replace and is a frequently searched part for Peugeot 207, suitable for both mechanical repairs and replacing damaged or worn mirrors. Its electric features and sensor capabilities provide the replacement part with superior value and usefulness, making it an ideal choice for your car.

Whether you are performing maintenance repairs or upgrading your vehicle, this mirror offers both functionality and visual appeal while preserving the original quality and design of Peugeot. Take the opportunity to enhance your vehicle’s safety and comfort with this reliable and stylish part.

This Right Side Mirror is designed specifically for the Peugeot 207, equipped with electric controls, built-in heating, and a temperature sensor to ensure optimal visibility in various weather conditions. The mirror features the ETS color finish in Grey Cendre, providing a seamless fit with the vehicle’s exterior design.

The mirror’s electric adjustment allows precise positioning from inside the vehicle, enhancing driver convenience and safety. The heating function prevents fogging and ice buildup, which is critical during cold weather. The temperature sensor supports the heating system to activate automatically when needed, effectively maintaining clear vision.

This part is slightly scratched but remains fully functional and ready for installation. It is commonly replaced due to damage from impacts or wear over time. Replacement typically requires removing the interior door panel to access the mirror mounting screws and electrical connectors.

Technical Information

• Manufacturer: PSA (Grouped under Citroën Peugeot)
• Model: Peugeot 207
• Product Codes: 96806501XT, 8149ZH
• Additional Numbers: ETSC

Replace your damaged or malfunctioning right side mirror with this direct-fit unit designed for the Peugeot 207. This electrically adjustable, heated mirror with an integrated temperature sensor restores visibility and comfort in cold or wet conditions. Supplied in EXL Obsidian Black paint, it is intended for the passenger door and uses a 9-pin (4+5) connector. Frequently Searched By Part Numbers: 96806501XT, 8149ZH.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 207 (Passenger Side / Right)
• Product Codes: 96806501XT, 8149ZH
• Additional Numbers: Color EXL – Obsidian Black; Connector: 9 (4+5) Pin

Function

This unit Provides Electric Adjustment For The Mirror Glass, Built-In Heating To Accelerate Defrost/Demist, And A Temperature Sensor Integrated Into The Mirror Assembly. These Features Improve Visibility And Contribute To Vehicle Climate/Information Systems.

Installation Recommendations

Before Starting, Disconnect The Vehicle Battery To Avoid Short Circuits And Unintended Airbag Triggering. Typical Replacement Steps:

• Remove Interior Door Trim Or The Small Triangular Cover To Access Mirror Fasteners.
• Disconnect The Electrical Connector Carefully; Note The 9-Pin (4+5) Arrangement.
• Unscrew The Mirror Mounting Nuts Or Bolts And Remove The Old Assembly.
• Fit The New Mirror, Secure Fasteners Evenly And Reconnect The Electrical Plug.
• Reconnect The Battery And Test Electric Adjustment, Heating Function And Any Sensor Readouts Before Reassembling The Door Trim.

Use Proper Trim Tools To Avoid Damaging Clips And Panels. If The Vehicle Has Body-Colored Mirrors, Paint Matching Or Respraying May Be Required For Perfect Visual Fit. If You Are Unsure, Installation By A Professional Mechanic Is Recommended.

Why The Part Most Commonly Fails

• Impact Damage From Collisions Or Scrapes Leading To Broken Housing Or Glass.
• Motor Or Actuator Wear Causing Loss Of Electric Adjustment.
• Faulty Heating Element Due To Water Ingress Or Corrosion.
• Connector Corrosion Or Wiring Damage Resulting In Intermittent Operation.
• Paint Damage From Environmental Exposure Or Minor Impacts.

Notes For Buyers

This Mirror Is Commonly Searched By Its OE Numbers (96806501XT / 8149ZH). Ensure The Product Matches The Passenger Side (Right) Specification Of Your Peugeot 207. The Unit Is Supplied In EXL Obsidian Black Color And Uses A 9-Pin Connector (4+5).

This genuine replacement right mirror housing is designed for Peugeot 207 models equipped with electric adjustment, heating and an ambient/temperature sensor. Ideal for independent mechanics and DIY owners looking for a direct-fit part with original-style connectors and mounting points. The unit helps restore full mirror functionality — adjustment, heating to demist/defrost the glass, and temperature sensing where fitted — and is a common searched-for item by product codes 96806501XT and 8149ZH.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 207
• Product Codes: 96806501XT, 8149ZH
• Additional Numbers: EZRC, 9 (4+5) Pin

Compatibility And Notes

Fits Peugeot 207 vehicles that use the 9 (4+5) pin connector and the EZRC painted Gray Aluminium mirror cap. Verify the connector pin count and mirror shape against the vehicle before installation. The item is supplied with a few light scuffs as shown in the photos; these are cosmetic and do not affect mechanical or electrical functions.

Installation Recommendations

• Prepare basic trim tools and a soft panel remover to avoid damaging door cards and clips.
• Carefully remove the interior mirror access cover or door trim to reach the mirror mounting bolts; keep all fasteners for re‑use.
• Disconnect the electrical connector by releasing the locking tab before removing the mirror assembly.
• Unbolt the mirror from the door (usually three nuts) and remove the old unit. Transfer any components (e.g., mirror glass or heating element) if required by the repair strategy.
• Fit the replacement mirror, connect the electrical plug, tighten fasteners to the manufacturer’s specification, refit trim and test all functions: electric adjustment, heating and sensor response.
• Handle the mirror glass and heater element with care to avoid breakage. If unsure, use a service manual or repair guide for torque values and detailed removal steps.

Why This Part Typically Fails

• Physical Damage: Side impacts, parking knocks or collisions are the most frequent cause of mirror replacement.
• Corrosion And Moisture Ingress: Connector corrosion or water entering the mirror housing can cause motor or heater failure and intermittent electrical faults.
• Wear Of Adjustment Motor Or Mechanism: Repeated use over years can wear the small electric motors or gears, resulting in sluggish or failed adjustment.
• Heating Element Or Sensor Faults: Heater circuits or the temperature/ambient sensor can degrade, reducing demist function or causing incorrect readings.

Practical Tips

• Compare the connector pin count (9 = 4 + 5 arrangement) and housing shape with the old mirror to ensure fitment.
• Clean and inspect the door mirror mounting area and connector for corrosion before installing the new unit.
• If the mirror includes electrical folding or memory features, confirm these functions operate correctly after installation; some features may require initialization via the vehicle’s onboard systems.