This steering wheel control module is a direct-fit switch cluster designed for Citroën/Peugeot Group vehicles. It restores complete steering wheel button functionality — audio, phone and menu control inputs — and is ideal for professional workshops and DIY mechanics who search by part number. The module is a practical replacement for faded, damaged or intermittently working controls and keeps original steering wheel ergonomics and electrical interfaces.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model(s): Citroën C4 II, DS4, DS5, Peugeot 508, Partner II (as listed)
• Product Codes: 96720447ZD, 98094695ZD
• Additional Numbers: 96759249XT, 98000200ZD, 6243C4

Installation Recommendations

1. Disconnect the negative battery terminal and wait at least 10 minutes to disable the airbag system before starting work.
2. Remove the airbag module from the steering wheel following the vehicle manufacturer’s procedure.
3. Unscrew the retaining fasteners and carefully detach the steering wheel trim to access the switch module.
4. Disconnect electrical connectors and remove the old switch module. Take care with fragile plastic clips and ribbon cables.
5. Fit the replacement module, reconnect all plugs, and reassemble in reverse order. Ensure airbag and steering wheel fasteners are torqued to manufacturer specifications.
6. Reconnect the battery and verify full functionality of all steering wheel controls, voice/phone buttons and menu navigation.

Why This Part Fails Most Often

Steering wheel switch modules typically fail due to wear and mechanical damage rather than simple electrical aging. Common causes include worn contact pads from heavy use, broken or detached plastic/chrome trim (as in this unit), moisture ingress causing corrosion, short circuits after liquid spills, and physical damage from impacts or airbag deployment. Intermittent function can also be caused by connector issues or a faulty clock spring in the steering column, so inspect surrounding components when diagnosing.

Benefits of replacing this unit: restores factory control functionality, maintains resale value, and avoids more expensive electrical work if the problem is localized to the switch module. Because many buyers search by product number, the included codes help you confirm fitment quickly.

High-quality steering column stalk assembly COM2008 designed for Citroën and Peugeot models. This unit consolidates multiple controls into one compact module, restoring full functionality for lighting, wipers, indicators, horn and on-board computer commands. Ideal for professional garages and DIY mechanics who need a direct replacement part often searched by product codes (96759249XT, 98000200ZD, 6243C4, COM2008). Installing a correct stalk assembly returns intuitive multifunction control and eliminates intermittent faults such as stuck wipers, non-working indicators or inoperative horn.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 96759249XT, 98000200ZD
• Other Numbers: 6243C4, COM2008

Function And Benefits

• All-In-One Control: Combines headlight, fog light, wiper, indicator, horn and trip computer controls in a single stalk assembly.
• Direct Fit: Designed to match original mounting points and electrical connectors for the listed models, simplifying replacement.
• Restore Safety And Comfort: Replaces faulty or unreliable stalks that compromise signaling, visibility and driver information access.

Replacement Procedure

Basic replacement steps for competent mechanics:

• Disconnect The Battery: Always isolate the vehicle battery before beginning work to avoid short circuits and SRS/airbag system triggers.
• Remove Steering Column Covers: Unscrew and carefully separate upper and lower shrouds to access the stalk assembly.
• Disconnect Electrical Connectors: Unclip the module connectors gently to avoid damaging terminals.
• Remove Retaining Fasteners: Unscrew the mounting screws or clips holding the stalk assembly in place and extract the old unit.
• Fit New Unit: Position the replacement stalk, secure with original fasteners and reconnect all plugs.
• Function Test: Reconnect the battery and verify all functions (indicators, lights, wipers, horn, trip computer) before reassembling the covers.

Installation Recommendations

• Always Disconnect The Battery Before Work: Prevents electrical damage and accidental airbag deployment.
• Follow Manufacturer Torque And Assembly Procedures: Use correct fasteners and ensure connectors are fully engaged.
• Inspect Wiring And Connectors: Replace or clean corroded terminals to avoid recurring faults.
• Test All Functions Before Final Reassembly: Confirm operation of lights, wipers, horn and trip computer to avoid repeat disassembly.
• Use Proper Tools: Avoid excessive force on plastic clips and steering column components.

Most Common Failure Causes

• Mechanical Wear: Repeated use causes wear on internal contacts and switches, leading to intermittent or complete failure.
• Electrical Contact Corrosion: Moisture ingress or oxidized terminals create poor connections affecting multiple functions.
• Broken Stalk Or Internal Plastics: Physical damage from impact or misuse can break levers or internal guides.
• Short Circuits Or Wiring Damage: Chafed cables or previous repair faults can cause malfunctions or blown fuses.
• Accumulated Dirt And Debris: Impairs contact surfaces and switch movement, particularly on wiper and indicator mechanisms.

Notes For Professionals

This part is commonly identified by product codes 96759249XT and 98000200ZD (also referenced as 6243C4 / COM2008). Ensure physical match of connector shapes and mounting points when selecting replacements. For safety-critical tasks or when airbag components must be handled, follow manufacturer service instructions or have the fitment done by a qualified technician.

Warranty And Quality

Replacement of a defective steering column stalk restores original vehicle controls and improves safety. Verify part number fitment and inspect the unit on delivery for visible damage before installation.