High-quality 165 mm replacement speaker designed for a range of Citroën and Peugeot models. Ideal for professional workshops and DIY mechanics looking to restore clear, balanced sound in vehicle doors or rear deckboards. This speaker is commonly referenced by part numbers and fits original equipment locations where a 165 mm unit is specified. It delivers reliable midrange performance for radio, navigation prompts and cabin audio without demanding additional tuning or adapters in most standard installations.

Applications and Compatibility

Fits the following models (examples of typical applications): Citroën C2, Citroën C3, Citroën C3 II, Citroën C3 Pluriel, DS3, Peugeot 3008 I, Peugeot 308, Peugeot 5008 I. Often searched by part numbers: 9665245180, 6562AC, 6562X2.

Installation and Replacement

Replacement is straightforward for experienced technicians and competent DIYers. Typical steps:

• Remove the affected trim panel (door card or rear parcel shelf) following vehicle-specific removal procedures to avoid breaking clips.
• Disconnect the speaker electrical connector and note polarity (positive/negative) for correct reconnection.
• Unscrew the speaker from its mounting position and remove it carefully to avoid damaging the harness or trim.
• Position the new speaker, secure with the original screws or supplied fasteners, reconnect the connector and test audio before reassembling the trim.

Use appropriate hand tools and keep fasteners organized. Always avoid forcing plastic clips; use trim tools where possible to prevent damage.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C2; Citroën C3; Citroën C3 II; Citroën C3 Pluriel; DS3; Peugeot 3008 I; Peugeot 308; Peugeot 5008 I
• Product Codes: 9665245180, 6562AC, 6562X2
• Other Numbers: 965245180 (alternate reference)
• Size: 165 mm diameter

Installation Recommendations

Inspect the speaker connector and wiring for corrosion or damage before installation. Clean contact surfaces and ensure correct polarity to avoid phase issues. When reinstalling trim, verify that the speaker mounting surface is flat and free of debris to prevent buzzing. If the vehicle has a factory amplifier or sound system, test the speaker at low volume before full use to confirm compatibility and avoid damage from clipping.

Why This Part Typically Fails

Common failure causes include water ingress (especially in door-mounted speakers after damaged seals), foam or surround deterioration with age, mechanical damage from impacts, and electrical failure caused by amplifier clipping or overload. Burned voice coils and distorted cones are typical symptoms—listen for rattling, buzzing, loss of midrange, or complete silence.

Searching by part number (9665245180 / 6562AC / 6562X2) is a reliable way to find the correct replacement speaker for affected Citroën and Peugeot vehicles.

Overview

OEM-style replacement speaker compatible with a range of Citroën and Peugeot models. Supplied under part references 9665245180 and 6562X2, this 165 mm (approx. 6.5″) loudspeaker is intended for technicians and experienced DIY installers who need a direct-fit unit to restore factory audio performance. Common search terms: Citroën speaker 9665245180, Peugeot 6562X2, 165 mm car speaker, replacement door speaker.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C2; Citroën C3; Citroën C3 Pluriel; Citroën C4 II; Citroën C4 Picasso; Peugeot 3008 I; Peugeot 308; Peugeot 5008 I
• Product Codes: 9665245180, 6562X2
• Additional Numbers: N/A

Fitment And Application

The 165 mm diameter makes this speaker suitable as a direct replacement in door or factory speaker locations on the listed Citroën and Peugeot models. Exact installation position (front door, rear door, or dash) depends on vehicle trim and original equipment layout. This part is typically used where the original OEM speaker size is 165 mm.

Installation Recommendations

Recommended for professional installers and competent DIYers. Basic installation steps:

• Prepare: Park the car on a level surface and disconnect the negative battery terminal to avoid short circuits while working on vehicle electrics.
• Access: Remove the door trim panel or speaker grille following the vehicle manufacturer’s procedure to avoid damaging clips and wiring.
• Remove Old Unit: Unscrew the original speaker, carefully unplug the speaker connector and note any spacers or adapters used.
• Fit New Speaker: Transfer any necessary mounting brackets or gaskets, connect the speaker harness, and secure the new speaker with the original fixings.
• Test: Reconnect the battery and test the speaker at low volume to confirm correct polarity and operation before reassembling the door trim.
• Finish: Refit the trim and confirm all clips and screws are secured.

Common Failure Causes

Car speakers typically fail due to mechanical wear and environmental exposure rather than a fixed service interval. Typical causes include:

• Cone or foam surround deterioration caused by age and UV exposure.
• Water ingress from door seals or window channels leading to corrosion or voice coil damage.
• Blown voice coil from prolonged high-volume use or amplifier faults.
• Connector corrosion or broken wiring affecting signal delivery.
• Physical damage from improper removal/installation or impact.

Why Choose This Part

This speaker is offered as an OEM-compatible replacement referenced by common part numbers used by Citroën and Peugeot owners and workshops. It provides a straightforward route to restore audio clarity and balance without the need for custom adapters, saving fitment time for mechanics and confident DIYers. Always confirm the speaker size and mounting pattern on the vehicle before purchase to ensure a correct fit.

Notes For Mechanics And DIYers

Part numbers are frequently used when sourcing replacement speakers. Searching for 9665245180 or 6562X2 will help locate the exact item. Keep original mounting hardware and observe correct speaker polarity during installation to avoid phase issues. If the vehicle has an upgraded audio system or amplifier, verify compatibility to prevent overloading or underpowering the new speaker.