OEM 165 mm car speaker designed as a direct replacement for a range of Citroën and Peugeot models. Ideal for workshops and DIY mechanics who need a reliable, factory-fit sound solution that restores clarity and bass response in doors or rear parcel shelves. Often searched by OE codes 9664955880, 6562X2 and 6562C5—useful keywords for quick lookup in parts catalogs and search engines.

Benefits And Application

This speaker delivers authentic OEM fit and sound characteristics, making it suitable for restoring factory audio performance after a failed unit. It is constructed to match original mounting points and connector types used on many Citroën and Peugeot vehicles, reducing modification time during replacement. Typical uses: front door replacement, rear shelf upgrade, or restoring audio after water damage or cone deterioration.

Technical Information

• Manufacturer: Stellantis
• Model: Compatible With Various Citroën And Peugeot Models (See List Below)
• Product Codes: 9664955880, 6562X2, 6562C5
• Additional Numbers: 6562C5, 6562X2
• Diameter: 165 mm

Compatible Models

• Citroën C2
• Citroën C3
• Citroën C3 Picasso
• Citroën C3 Pluriel
• Citroën C4 Picasso
• Citroën C5
• Citroën C5 X7
• Citroën C8
• Citroën Xsara Picasso
• Peugeot 207
• Peugeot 3008 I
• Peugeot 308
• Peugeot 407
• Peugeot 5008 I
• Peugeot 807

How Replacement Is Performed

• Remove Interior Trim Or Door Panel Carefully To Access The Speaker—Follow Vehicle-Specific Clips And Screw Locations.
• Disconnect The Speaker Connector And Remove Mounting Screws Or Rivets Holding The Old Speaker.
• Compare Mounting Depth And Connector Type; If Required, Use An Adapter Plate Or Harness To Match Factory Fixings.
• Install The New Speaker, Observe Polarity (Positive/Negative), And Secure All Fasteners Evenly To Avoid Panel Rattles.
• Test The Speaker At Low Volume Before Reassembling Trim To Confirm Correct Operation And No Unwanted Noise.

Installation Recommendations

• Use Original-Style Fixings Or Correct Adapters To Preserve Fit And Avoid Distortion.
• Check Wiring And Connector Condition; Replace Corroded Terminals And Ensure Good Grounding.
• Seal Door Speaker Openings Against Moisture With Appropriate Gaskets Or Foam Tape To Extend Service Life.
• When Replacing In Doors With Integrated Tweeters Or Crossovers, Verify Crossover Connections To Maintain Sound Balance.
• Test Audio System After Installation At Moderate Volume; Avoid High Power Checks That Could Damage A New Speaker.

Why The Part Most Often Fails

Common failure causes include cone Or Surround Deterioration Due To Age And UV/Heat Exposure, Water Ingress From Door Seals Causing Corrosion, Voice Coil Damage From Overpowering Or Short-Term High Volume, And Mechanical Damage From Impacts. Faulty Wiring Or Loose Connectors May Also Produce Distortion Or Intermittent Operation.

Practical Notes For Mechanics And DIYers

Searches Frequently Use OE Numbers (9664955880, 6562X2, 6562C5), So Including These Codes In Orders Or Catalog Queries Speeds Identification. The Speaker Is Supplied As A Direct-Fit Replacement For The Models Listed, Minimizing Installation Time In Professional Or Home Workshops.

High-quality 165 mm replacement speaker designed for a wide range of Citroën and Peugeot models. This unit is a direct-fit audio component commonly sought under original part numbers and aftermarket references (see Technical Information below). Ideal for professional workshops and experienced DIY enthusiasts who need a reliable, easy-to-install speaker to restore factory sound or upgrade a worn original. The compact 165 mm size delivers clear midrange reproduction and integrates seamlessly with the vehicle’s original mounting points and wiring harness.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C2; Citroën C3; Citroën C3 Picasso; Citroën C3 Pluriel; Citroën C4 Picasso; Citroën C5; Citroën C5 X7; Citroën C8; Citroën Xsara Picasso; Peugeot 207; Peugeot 3008 I; Peugeot 308; Peugeot 407; Peugeot 5008 I; Peugeot 807
• Product Codes: 9664955880, 6562X2, 6562C5
• Other Numbers: 6562.C5, 6562.X2, 6562C5, 6562X2, 9664955880
• Size: 165 mm (6.5″) Diameter

Installation Recommendations

• Prepare Tools: Panel removal tools, Phillips/torx screwdriver set, socket set, and a multimeter for polarity check.
• Safety First: Disconnect the negative battery terminal before starting work to avoid short circuits and accidental airbag deployment when removing trim near A‑pillars.
• Remove Trim: Carefully remove the door card or trim panel following the vehicle manufacturer’s procedure to avoid breaking clips.
• Disconnect Old Speaker: Unscrew the original speaker, unplug the wiring harness, and note the polarity of the connectors or mark the positive lead.
• Fit New Speaker: Mount the replacement speaker into the original speaker aperture using the factory mounting points. Ensure the speaker sits flush and is secured without over‑tightening screws.
• Reconnect And Test: Reconnect the wiring (observe polarity), temporarily reconnect the battery, and test the speaker at low volume to confirm correct operation before reassembling the trim.
• Sealing And Vibration: Use a foam gasket or anti‑vibration pad if available to reduce rattles and improve acoustic sealing.

Why The Part Fails Most Often

• Age And Wear: Foam surrounds and suspension materials deteriorate over time, leading to distortion or rattling.
• Water Ingress: Moisture from door leaks or condensation can damage the cone, voice coil, or cause corrosion of terminals.
• Overdrive/Amplifier Faults: Excessive power or amplifier clipping can burn the voice coil, producing a blown speaker.
• Mechanical Damage: Physical impact during door repairs or improper installation can deform the cone or magnet assembly.
• Connector Corrosion Or Loose Contacts: Poor electrical connection causes intermittent sound or complete failure.

Search Tip: Many customers search by part numbers such as 9664955880, 6562X2 or 6562C5 — including these codes in your search will help you find the correct replacement quickly.