9664706180 – Used Parts Vendor https://www.usedpartsvendor.com Citroën Peugeot spare parts Thu, 12 Nov 2026 03:02:23 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1.4 BSM R06 Delphi Citroën Peugeot 9675878780 6500FT https://www.usedpartsvendor.com/electro-components/control-units/bsm-motor-unit/bsm-r06-delphi-citroen-peugeot-9675878780-6500ft-2/ Sat, 01 Feb 2025 03:32:03 +0000 https://www.usedpartsvendor.com/uncategorized/bsm-r06-delphi-citroen-peugeot-9675878780-6500ft-2/ BSM R06 Siemens VDO for Citroën and Peugeot vehicles. Some of the mounting tabs may be damaged; this does not affect functionality.

Product Overview

BSM R06 (Body System Module) manufactured by Siemens VDO, compatible with a range of Citroën and Peugeot models. This unit centralises fuses, relays and power distribution for multiple electrical circuits (lights, wipers, fuel pump relay, starter relay and related circuits) and communicates with the vehicle network. Commonly searched by part numbers such as 9675878780 or 6500FT, this BSM is a direct-fit replacement for many C3 II and 207 applications and is aimed at professional workshops and competent DIY mechanics looking for a reliable spare control module.

Technical Information

  • Manufacturer: Siemens VDO
  • Model: BSM R06
  • Product Codes: 9675878780, 6500FT
  • Additional Numbers: 9664706080, 9664706180, 9664706280, 9666700280, 9666700380, 9666700580, 9675878280, 9675878780, 9807028880
  • Fitment: Citroën C3 II, Peugeot 207

Installation Recommendations

Always disconnect the battery before starting work and follow the vehicle manufacturer’s disassembly procedure to avoid damage to the unit. Handle electrical connectors carefully to prevent bent pins and ensure all mating faces and seals are clean. After mechanical installation, restore power and verify all affected circuits (lights, central locking, wipers, engine crank/fuel pump circuits). Some vehicle variants may require configuration or adaptation of settings with PSA diagnostic tools (DiagBox/Lexia/PP2000) to restore full functionality of certain features. Use correct torque on fasteners and protect the module from future water ingress by replacing any damaged seals or clips.

Replacement Procedure

  1. Disconnect the negative battery terminal and wait a short period to clear capacitors.
  2. Locate the BSM unit (typically in the engine bay or fusebox area depending on model).
  3. Remove protective covers and note fuse/relay positions if needed for reference.
  4. Unplug electrical connectors by releasing locking tabs; unbolt the unit from its mounting.
  5. Fit the replacement BSM, secure with bolts, reconnect connectors and reinstall covers.
  6. Reconnect the battery and check all related systems; run basic diagnostic checks and clear any fault codes.

Why This Part Most Often Fails

The most frequent causes of BSM failure are water ingress and corrosion, thermal stress from the engine bay environment, vibration leading to cracked mounting tabs or connector wear, and internal relay/fuse failures after many years of service. The listing notes that some mounting tabs may be damaged; while this typically does not affect electrical functionality, damaged mounts should be repaired or reinforced to prevent future mechanical strain and moisture entry.

Notes For Buyers

This unit is commonly identified and searched by part numbers (e.g. 9675878780, 6500FT). Verify the part number against your vehicle’s existing unit before ordering. Installation is suitable for experienced DIY mechanics and professional workshops; if in doubt about coding or adaptation steps, use qualified diagnostic equipment.

]]> BSM R04 DELPHI Citroën Peugeot 9664706180 https://www.usedpartsvendor.com/electro-components/control-units/bsm-motor-unit/bsm-r04-delphi-citroen-peugeot-9664706180-2/ Wed, 29 May 2024 04:10:34 +0000 https://www.usedpartsvendor.com/uncategorized/bsm-r04-delphi-citroen-peugeot-9664706180-2/ The BSM R04 Delphi module for Citroën and Peugeot vehicles is an essential electronic component designed to manage and distribute electrical power in the engine compartment. Part number 9664706180, this module plays a critical role in ensuring the reliable operation of various electronic systems in your vehicle.
This BSM unit functions as the main distribution box in the engine compartment, routing electrical energy to critical systems and components such as headlights, windshield wipers, fans, and other vital systems. It also safeguards these circuits from overloads and shorts through integrated fuses and relays.
How to Replace the BSM?
The BSM R04-00 9664706180 is housed in a plastic enclosure located in the engine compartment right next to the battery. Before removing the BSM unit, it is necessary to disconnect the positive terminal from the battery. Then loosen the 13 mm nut. Release and disconnect all connectors except for one, which will be used to pull the unit out towards you. There are small clips on the sides of the unit that need to be released using a flat screwdriver while pulling on the last cable towards you. Additionally, from the bottom of the unit, release two clips holding the large fuses, and you are done. Installation is done in reverse order.
During the order process, you have the option to provide your VIN number, and we will check the compatibility of the part with your vehicle.

Technical Information

  • Manufacturer: Delphi
  • Model: BSM R04-00
  • Product Codes: 9664706180
  • Additional Numbers: 9807028780, 9807028880
]]>