Part description

This used Peugeot 307 navigation display is designed to display important information about the vehicle and comfort functions. In practice, it serves as a multi-function display, which displays the data of the radio, navigation, on-board computer and other operating information of the car.

The part is suitable for customers looking for an original replacement solution according to product number 9663321880 or designation 6563YN and 6563YP. Searching by part number is often the most reliable way to find a matching component when replacing this type of component.

The advantage is that it is an original Stellantis / Citroën Peugeot part that was fully functional and tested. This display is therefore a practical choice for car mechanics and DIYers when repairing a non-functioning, illegible or damaged original piece.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 307
• Other numbers: 9663321880, 6563YN, 6563YP, NFP

Product codes

Product codes: 9663321880, 6563YN, 6563YP

Models from labels and documents: Peugeot 307

Installation recommendations

Generally/typically for the replacement of an electronic display in a vehicle, the exact procedure may vary according to the specific design of the car and the type of dashboard. Below is a safe and practical general procedure.

1) Before assembly

• Check that all product numbers on the original and new part match.
• Compare the connectors, the shape of the display body, the mounting and the overall appearance of the part.
• Inspect the condition of the contacts, whether they are corroded, bent or mechanically damaged.
• Verify that the used display is not cracked, stained or otherwise damaged during storage or transportation.
• Before starting work, we recommend disconnecting the battery according to normal service practice.

2) Necessary tools and materials

• Set of common hand tools
• Plastic pry bar for panel removal
• Screwdrivers or bits corresponding to the fasteners used
• Cleaning agent for electrical contacts
• Clean lint-free cloth or cloth
• Work lighting

3) Step-by-step assembly procedure

1. Park the vehicle in a safe place and turn off the ignition.
2. Disconnect the battery if it corresponds to normal service procedure for working with electrical components.
3. Carefully dismantle the surrounding covers or paneling of the dashboard so that you can get to the display without damaging the plastic parts.
4. Undo the fasteners of the original display.
5. Carefully slide out the display to access the connector(s).
6. Unplug the connector without using excessive force and check its condition.
7. Compare the original and new part side by side, especially the numbers, connectors and mounts.
8. If necessary, gently clean the electrical contacts with a suitable product.
9. Connect the connector to the new display and check that the connection is tight and properly seated.
10. Sit the display into the mounting position and secure it with the original fasteners.
11. Reinstall all removed covers and trim.
12. Connect the battery and perform a basic check of the display function after turning on the vehicle.
• 4) Post-assembly checks and test drive/function verification
  • Check that the display lights up and displays data legibly and without dropouts.
  • Verify the display of the functions that the documents indicate: radio, navigation, on-board computer and other car functions.
  • Watch the display for flickering, turning off or lagging.
  • During a short test drive, verify the stability of the display even with normal vehicle vibrations.

  5) The most common assembly mistakes + how to avoid them

  • Part replacement by appearance instead of number – always compare the designation 9663321880, 6563YN, 6563YP.
  • Damage to interior plastic parts – use plastic disassembly tools and proceed without violence.
  • Poorly seated connector – after connection, check that the connector is properly seated and free of play.
  • Assembly without contact inspection – check oxidation, dirt and pin condition before installation.

  Reasons why the part is damaged

  • Age and normal wear and tear of electronics during long-term operation.
  • Voltage fluctuations in the vehicle electrical installation which can affect the function of the display.
  • Defective or dirty connectors, causing image or communication dropouts.
  • Mechanical damage during careless disassembly or intervention in the interior of the car.
  • Moisture and dripping which can damage electronic circuits and contacts.
  • Temperature stress and long-term exposure to the sun in the interior of the vehicle.
  ]]>