High-quality replacement right (passenger side) exterior mirror for Citroën Xsara Picasso, designed for mechanics and DIY car owners who search by product number (96570980XT, 815355). This electrically adjustable and electrically folding mirror restores full convenience and safety: precise remote adjustment, power folding for tight parking spaces, and an OEM-style fit for straightforward installation. The mirror housing shows minor scratches on the black section but the electrical functions and connector type correspond to original specifications. Ideal when replacing a damaged or non-working mirror motor or folding mechanism.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën Xsara Picasso
• Product Codes: 96570980XT, 815355
• Additional Numbers: 815355, 96570980XT
• Side: Passenger (Right)
• Wiring: 9 Wires (9-Pin Connector)
• Functions: Electric Adjustment, Electric Folding
• Color: EZW – Paint Gray (LAK ŠEDÝ FER)

Installation Recommendations

Typical replacement procedure for a skilled mechanic or competent DIYer:

• Carefully remove the interior door trim to access the mirror mounting area—use appropriate trim tools to avoid damage.
• Disconnect the mirror electrical connector and remove the fastening bolts or nuts securing the mirror to the door.
• Remove the old mirror assembly and transfer any required parts (e.g., mirror glass, indicators) if applicable.
• Fit the replacement mirror, secure fasteners to the manufacturer’s torque values, reconnect the electrical connector, and refit the door trim.
• Test all functions: adjustment, folding, and any heating or indicators if present.

Tip: Work methodically, keep fasteners organized, and protect painted surfaces. If unsure about interior trim removal, consult a repair manual or service instructions for the Xsara Picasso.

Common Failure Causes

• Impact Damage: Most frequent—accidents, parking knocks, or door strikes crack housings or break the folding mechanism.
• Motor/Actuator Wear: Repeated use over years can cause the electric motor or gearing to fail intermittently or stop.
• Water Ingress and Corrosion: Moisture reaching the connector or motor can corrode contacts and cause electrical faults.
• Wiring Damage: Pinched or damaged wiring in the door harness or connector leads to loss of function.
• Mechanical Jamming: Debris or broken plastic components can prevent proper folding or adjustment.

Why Search By Product Number

Mechanics and DIYers frequently look up mirrors by OEM codes 96570980XT and 815355 to ensure correct fitment and to speed up sourcing. Including these numbers in your search increases the chance of finding a direct-fit replacement very quickly.

Warranty & Condition Note

The mirror is offered as described—electrically adjustable and folding, with a slightly scratched black section. Verify visual condition from product images where available. Functionality corresponds to the listed specifications.

Overview

High-quality replacement right side mirror assembly designed for Citroën Xsara Picasso vehicles. This electrically operated and electrically folding mirror provides full functionality for adjustment and folding, with a 9-pin electrical connector for power and signal circuits. The unit comes in KEB color (paint Nocciola) and has a light scratch on the black plastic section. Ideal for professional garages and DIY mechanics who need a direct-fit, functional mirror replacement matched by part numbers.

Key Features

• Electric Adjustment And Electric Folding
• Passenger Side (Right)
• 9-Pin Connector For Power And Control Signals
• Painted In KEB (Nocciola) — Other Colors May Be Available
• Direct Replacement For Citroën Xsara Picasso

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën Xsara Picasso
• Product Codes: 96570980XT, 815355
• Other Numbers: KEBC, KEB (Paint Nocciola)

Installation Recommendations

Replacement of the mirror is straightforward for experienced technicians and competent DIYers. Typical procedure:

• Disconnect The Battery Before Starting Work When Servicing Electrical Components.
• Remove Inner Door Trim Or Small Access Panel To Reach Mirror Mounting Bolts And Connector.
• Carefully Unclip The Mirror Trim/Cap To Avoid Breaking Retaining Clips.
• Disconnect The 9-Pin Electrical Connector And Remove The Mounting Bolts (Usually 3 Fasteners).
• Fit The New Mirror, Connect The Electrical Connector, And Hand-Tighten Bolts Before Final Torque To Manufacturer Specification.
• Test All Functions (Adjustment, Folding) Before Refitting Door Trim.
• Check For Proper Mirror Alignment And Secure Fastening After Installation.

Recommended Tools: Trim Removal Tools, Torx Or Socket Set (Depending On Fasteners), Multimeter For Quick Electrical Checks. Use Dielectric Grease On Connector Pins If Corrosion Is Present.

Why This Part Most Commonly Fails

• Impact Damage From Collisions Or Parking Incidents Causing Broken Housing Or Internal Mechanism Failure.
• Water Ingress And Corrosion Leading To Motor Or Connector Failure Over Time.
• Wear Of The Folding Mechanism Or Gears Due To Repeated Use.
• Electrical Faults Caused By Damaged Wiring Or Corroded Pins In The Connector.

Notes For Mechanics And DIYers

This mirror is a practical replacement option when the original unit is damaged or malfunctioning. Verify connector pin count and mounting orientation before installation. Always perform a functional test after connecting the unit and before reassembling the door panel to ensure adjustment and folding circuits operate correctly.

Compatibility And Part Identification

Commonly Searched By Part Numbers: 96570980XT, 815355. Fits Citroën Xsara Picasso passenger side applications that use a 9-pin connector and KEB paint finish. The slightly scratched black trim is cosmetic and does not affect electrical function.

Model: Citroën Xsara Picasso
Product Codes: 96570980XT, 815355
Additional Numbers: 815355, 96570980XT

Commonly, side mirrors can get damaged due to various reasons, including accidents or external impacts. It is essential to replace them promptly to maintain the vehicle’s safety and aesthetics. This mirror unit features 9 wires, facilitating electric control and foldability for added convenience.

To install this mirror, simply remove the existing damaged unit and connect the new one by matching the wire harness. Ensure that the cover cap is purchased separately to complete the look and protection of the mirror. Regular checks are recommended to ensure that the mirror remains in proper working condition, as wear and tear can eventually lead to functionality issues.

Upgrade your Citroën Xsara Picasso with this high-quality right-side mirror and enjoy a blend of safety and style.