High-quality left (driver side) replacement mirror designed for Citroën C4 models. This electrically operated unit with a 7-pin (5+2) connector covers common functions such as mirror adjustment, heating and electric folding where fitted. Painted in KTV (Black Perla Nera) for a factory-matched finish, it is intended as a direct replacement for vehicles using the listed part codes. The mirror is an ideal choice for workshops and DIY mechanics who need a reliable, ready-to-fit spare that restores original functionality and appearance.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C4
• Product Codes: 96548384, 8149ZW, KTV
• Other Numbers: 8149.ZW
• Color: KTV – Black Perla Nera
• Connector: 7-pin (5+2)
• Position: Left / Driver’s Door

Installation Recommendations

Follow these steps to ensure a safe and effective replacement:

1. Prepare Tools: Trim removal tools, Torx/screwdrivers as required and electrical cleaner/contact spray.
2. Safety First: Disconnect the negative battery terminal before starting to prevent short circuits or accidental airbag deployment when removing door trims.
3. Remove Interior Door Trim: Carefully detach door card to access the mirror mounting area and electrical connector. Use plastic trim tools to avoid damaging clips and trim.
4. Disconnect Wiring: Unplug the 7-pin connector. Inspect pins and wiring for corrosion or damage before fitting the new mirror.
5. Remove Old Mirror: Unscrew the mounting nuts/bolts and carefully remove the old mirror from the door aperture.
6. Fit New Mirror: Position the replacement mirror, secure mounting hardware to the correct torque, and reconnect the electrical connector. Ensure connector seats fully.
7. Functional Check: Reconnect the battery and verify mirror adjustment, heating and folding (if applicable) before refitting the door trim.
8. Final Assembly: Refit the door card and ensure all clips and screws are secured. Perform a final function test.

Why This Part Fails Most Often

• Impact Damage: Collisions, knocks in car parks or side-swipes are the most frequent causes of broken housings, cracked glass or bent mounting points.
• Water Ingress and Corrosion: Moisture can corrode connector pins or damage the small electric motors and heating elements, leading to intermittent or complete failure.
• Motor/Wiring Wear: Repeated use over time can wear out the adjustment motor or cause wiring fatigue, especially where cables are flexed at the hinge point.
• Electrical Faults: Blown fuses, damaged connectors or poor grounding may cause loss of functions such as heating or motor movement.

Fitment Notes

Ensure the vehicle uses the same connector type and the listed part numbers prior to installation. The 7-pin (5+2) configuration typically supports mirror adjustment, heating and folding functions depending on vehicle equipment level. Test all functions before final assembly of the door trim. For painted mirrors, inspect finish for matching and handle carefully to avoid scratches during fitting.

Additional Advice For Mechanics And DIYers

This mirror is suitable for professional workshops and competent DIY mechanics. Verify functionality immediately after installation to save time on follow-up diagnostics. Keep spare mounting nuts/clips on hand, as these small parts can be damaged during removal on older vehicles.

Description

OEM-quality left side mirror designed for Citroën C4 vehicles. This electrically operated mirror comes painted in KCW (Sand / Sable de Langrune) and features a 7-pin (5+2) electrical connector to support multiple functions. Ideal for professional garages and experienced DIY mechanics looking for a direct-fit replacement. Commonly searched under product codes 96548384 and 8149ZW.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4
• Product Codes: 96548384, 8149ZW
• Other Numbers: KCW (Color Code)
• Connector: 7-pin (5+2) electrical connector
• Mounting Position: Left / Driver’s Door

Installation Recommendations

• Disconnect the vehicle battery before starting work to prevent short circuits when handling electrical connectors.
• Use plastic trim tools to remove the door card to avoid damage to clips and trim.
• Support the mirror assembly while removing the mounting bolts to prevent it from falling and damaging the glass or paint.
• Carefully unplug the 7-pin connector (5+2) and inspect pins and socket for corrosion or bent contacts; replace connectors if damaged.
• Fit the new mirror, tighten fasteners evenly and avoid over-torquing. Reconnect the electrical connector and test all functions (adjustment, folding, any integrated lighting) before refitting the door trim.
• After installation, verify mirror adjustment range and folding operation. Make final checks with doors closed to ensure wiring is not pinched at the hinge area.

Common Failure Reasons

Side mirrors typically fail due to physical impact (collisions, parking damage) and mechanical wear of the electric motor or folding mechanism over time. Water ingress and corrosion at the connector or inside the mirror housing can cause intermittent or permanent electrical faults. Wiring fatigue frequently occurs where the harness flexes inside the door, especially on vehicles exposed to harsh climates or heavy road salt. Cosmetic damage such as paint chips or fading is usually caused by stone chips, UV exposure, or abrasion.

Notes

Search by OEM numbers 96548384 and 8149ZW and color code KCW to ensure the closest match for paint and connector type. This mirror is intended as a direct replacement for the left (driver) door on Citroën C4 models equipped with a compatible 7-pin connector.

This OEM-style left side mirror is designed for Citroën C4 driver doors with electric adjustment. Ideal for professional workshops and DIY enthusiasts, the unit comes with the original 7-pin connector (5+2) and is finished in EKQD Lucifer Red. Commonly searched by product codes, this mirror delivers direct replacement fitment and restores full functionality including electric adjustment and integrated features for models equipped with the 7-pin interface.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 (Driver Side, Electric Mirror)
• Product Codes: 96548384
• Additional Numbers: 8149ZW, EKQD

Features And Function

The mirror provides powered adjustment for vertical and horizontal positioning, and supports additional functions via the 7-pin connector (commonly used for heating, folding and signal or sensor circuits depending on vehicle equipment). The housing is painted in Lucifer Red (EKQD). The assembly includes the electric actuator and connector plug for straightforward electrical integration.

Compatibility And Fitment

Fits Citroën C4 driver doors equipped with a 7-pin (5+2) mirror connector and the corresponding mounting points. Always verify the part number (96548384) and connector type when matching to the vehicle. This unit is intended as a direct replacement for vehicles with the same connector layout and painted finish.

Replacement Procedure

• Park the vehicle on a level surface and disconnect the negative battery terminal to prevent short circuits during work.
• Remove the interior door trim or triangular trim cover to access the mirror mounting bolts and electrical connector.
• Disconnect the 7-pin electrical connector carefully, releasing any locking tab.
• Unscrew the mirror mounting nuts/bolts and remove the old assembly from the door.
• Position the new mirror, secure the mounting fasteners to the manufacturer’s recommended tightening sequence, and reconnect the electrical plug.
• Refit the interior trim, reconnect the battery, and verify operation of adjustment, heating and any additional functions.

Installation Recommendations

• Recommended Tools: Trim removal tools, Torx or metric sockets/wrenches, ratchet, and a multimeter for electrical checks.
• Disconnect Battery: Always disconnect the battery before disconnecting electrical connectors to avoid shorts and potential airbag system interference.
• Secure Fastening: Tighten mounting bolts evenly to prevent stress on the mirror housing and to ensure proper sealing against the door frame.
• Electrical Check: After installation, cycle the mirror through all positions, test heating (if equipped) and confirm any folding or indicator functions operate correctly.

Common Failure Reasons

Side mirrors typically fail due to impact damage (collisions or scrapes), water ingress causing connector corrosion, wear of the electric actuator or gears, and internal cable/connector damage from repeated folding. Paint and plastic components can also degrade over time due to environmental exposure. Replacing the entire assembly is often faster and more reliable than repairing internal components, especially when mechanical damage or corrosion is present.

Buy this left electric mirror for Citroën C4 to restore full functionality and appearance. Search by product code 96548384 or reference 8149ZW / EKQD for correct fitment and color match.