High-quality replacement driver’s seat side airbag designed for Peugeot 206 models equipped with seat-mounted side airbags. This unit restores the vehicle’s passive safety system after deployment or electrical failure. It is commonly searched by part numbers 96498618YK, 94597649YK and 8216P0 — include these codes when looking up fitment. The Grey Cachemire trim ensures a discreet visual match with original interior upholstery on compatible vehicles.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 206
• Product Codes: 96498618YK, 94597649YK, 8216P0
• Other Numbers: NFP

Function And Fitment

This is a seat-mounted side airbag intended for the driver’s seat. Its primary function is to provide lateral protection in a side impact by deploying rapidly when instructed by the vehicle’s SRS (Supplemental Restraint System) control unit. The part is intended for Peugeot 206 variants factory-equipped with seat side airbags; fitment must match the vehicle’s original seat trim and connector layout. Color: Grey Cachemire (HYK) to match interior upholstery on applicable trims.

Replacement Procedure

Basic replacement steps (general guidance):

• Disconnect the vehicle battery (negative terminal) and wait the recommended time for the SRS capacitors to discharge (follow manufacturer guidance) before starting work.
• Adjust or remove the seat to access fasteners and electrical connectors. In many cases you must unbolt the seat from the rails to gain full access.
• Carefully disconnect the airbag electrical connector(s) located beneath the seat; note connector orientation and locking clips.
• Remove the old airbag module from the seat frame and install the replacement, ensuring correct alignment and secure fastening.
• Reconnect connectors, torque seat mounting bolts to manufacturer specifications, and reconnect the battery. Verify SRS warning lamp behaviour; a persistent SRS warning requires diagnostic reading by a qualified technician.

Why This Part Most Often Fails

• Deployment During A Collision: Airbags are single-use devices and must be replaced after deployment.
• Electrical Faults Or Connector Damage: Corrosion, broken pins, or damaged wiring under the seat can interrupt the circuit and render the module non-functional.
• Mechanical Damage Or Wear: Physical damage to the seat structure or airbag housing from previous repairs or accidents can compromise the unit.
• Moisture Ingress: Exposure to moisture from spills or leaks can corrode contacts or sensors associated with the airbag circuit.

Installation Recommendations

• Always follow Peugeot/Stellantis service procedures and safety precautions when working on SRS components.
• Disconnect the battery and allow the specified discharge time before touching airbag connectors.
• Use appropriate tools and observe correct connector engagement; damaged connectors should be replaced rather than repaired with temporary fixes.
• After replacement, check the SRS warning lamp and, if necessary, read fault codes with a compatible diagnostic tool to confirm system readiness.
• If you are not experienced with SRS systems, have the replacement performed or verified by a professional technician.

Part numbers: 96498618YK / 94597649YK / 8216P0 ensure correct lookup and faster identification in inventory systems. This airbag is intended only for vehicles originally equipped with the corresponding seat-mounted side airbag option.