High-quality Left Front Driver’s Seat Safety Belt with pyrotechnic pretensioner designed for Peugeot 206 and 206+. This replacement belt restores occupant restraint performance after wear or mechanical failure and is suitable for professional workshops and skilled DIY mechanics. The assembly features the original-style retractor and pretensioner interface to match factory fitment and mounting points. Commonly searched by part numbers, this unit helps you quickly locate the correct spare for timely repairs.

Features And Function

The seat belt assembly combines a webbing strap, automatic retractor with locking mechanism and a pyrotechnic pretensioner. Under severe deceleration or impact, the locking mechanism prevents webbing payout while the pretensioner tightens the belt to reduce occupant movement. The webbing (Color FXX – Black) is abrasion-resistant and UV-stabilized for typical automotive use. The retractor contains an inertia locking device that engages during sudden stops or collisions.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96468609XX, 8973SF, 8973WK, 8974GT
• Other Numbers: 206+96468609XX, 8973SF, 8973WK, 8974GT, 96468609XX
• Color: FXX – Black
• Position: Left Front (Driver Side)
• Type: Pyrotechnic Pretensioner Seat Belt

Installation Recommendations

Before starting work, always disconnect the vehicle battery and follow the manufacturer’s safety procedures. Typical replacement steps:

1. Disconnect negative battery terminal and wait per vehicle safety guidelines to avoid accidental pretensioner activation.
2. Remove interior trim panels to access upper mounting point and retractor area.
3. Unbolt lower anchor and retractor mounting bolts. Carefully disconnect the pretensioner electrical connector (if present).
4. Install the new belt assembly, route the webbing exactly as the original, and hand-start bolts before torquing to manufacturer specifications.
5. Reconnect pretensioner connector and reattach trim. Reconnect battery and verify seat belt operation: smooth extension/retraction and correct locking under sharp pulls.

If The Assembly Contains A Pyrotechnic Pretensioner, Handle With Care: Do Not Attempt To Service Or Re-Arm The Pretensioner Yourself. Disposal And Replacement Of Pyrotechnic Components Should Follow Local Regulations And Workshop Safety Rules. If Uncertain, Have The Replacement Performed By A Qualified Technician.

Why The Part Usually Fails

• Wear And Damage To Webbing: Fraying, cuts or heavy contamination can compromise strength and require replacement.
• Retraction Or Locking Faults: Inertia mechanism or retractor spring wear can cause the belt to stick, not retract, or fail to lock properly.
• Pretensioner Activation: In A Collision The Pyrotechnic Pretensioner Fires Once And The Entire Assembly Must Be Replaced.
• Connector Corrosion Or Wiring Damage: Electrical faults can render pretensioner and associated warning systems inoperative.

Practical Notes For Workshops And DIYers

This seat belt is commonly searched using the product codes listed above—include those codes when sourcing parts. Replacement is straightforward for an experienced mechanic but requires respect for safety procedures due to the pyrotechnic pretensioner. After installation, always perform a functional check of belt retraction, locking behavior and, where applicable, SRS/airbag related warning lights to ensure no related fault codes were triggered.

Recommendation

Replace The Seat Belt If The Webbing Shows Visible Damage, If The Retractor Fails To Operate Smoothly, Or After Any Accident Where The Pretensioner May Have Activated. Use Original-Style Parts With Matching Mounting Points And Electrical Connectors To Ensure Correct Fit And Function.