Overview

Direct-fit right side mirror for Peugeot 407 with electric adjustment, electric folding and integrated heating and temperature sensor. Ideal for professional garages and DIY mechanics looking for a replacement mirror assembly. Commonly searched under product codes 96457004XT and 8149VC (KTVD). The unit is finished in Black Perla Nera (Color Code KTV) and shows a light scratch as pictured.

Features And Benefits

• Electrically Adjustable: Precise motor-driven mirror positioning for safe visibility.
• Electrically Folding: Power-fold function reduces risk of damage in tight spaces and during parking.
• Heated Mirror: Built-in heating element clears frost and condensation quickly.
• Temperature Sensor: Assists climate-related functions and improves de-icing response.
• Passenger Side Fitment: Specifically intended for Right Side / Passenger Side of Peugeot 407.
• OEM Reference Numbers Included For Fast Search: 96457004XT, 8149VC, KTVD.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407
• Product Codes: 96457004XT, 8149VC
• Other Numbers: KTVD; Color Code KTV (Black Perla Nera)

How To Replace On Vehicle

Replacement is straightforward for experienced mechanics. Typical steps:

• Disconnect Battery Before Work To Avoid Short Circuits And Airbag/System Faults.
• Remove Inner Door Trim Using Proper Trim Tools To Protect Clips.
• Disconnect Mirror Electrical Connector And Any Heater/Sensor Plugs.
• Unscrew Mirror Retaining Bolts From Door (usually 3 bolts) And Carefully Remove The Mirror Assembly.
• Fit The New Mirror, Tighten Fasteners To Manufacturer Torque Where Available, Reconnect Electrical Plugs, Refit Door Trim.
• Test All Functions: Adjustment, Folding, Heating And Any Sensor Signals Before Final Reassembly.
• Estimated Time: Approximately 30–60 Minutes Depending On Experience And Door Trim Complexity.

Installation Recommendations

• Use Plastic Trim Tools To Avoid Damaging Door Panels And Clips.
• Check Connector Pins And Wiring For Corrosion Or Damage Before Installing The New Unit.
• Apply Appropriate Thread Locker Or Torque Settings If Specified By Manufacturer.
• Verify Mirror Alignment And Functionality With Ignition On; If Folding Or Motors Do Not Operate, Recheck Connections And Fuses.
• If The Mirror Has Integrated Signals Or Advanced Sensors, Confirm Function After Installation.

Why The Part Most Often Fails

• Impact Damage From Collisions Or Door Contact — The Most Common Cause Leading To Broken Housings Or Internal Mechanisms.
• Water Ingress And Corrosion — Moisture Can Corrode Connectors, Motors And Heating Elements.
• Motor Wear Or Gear Stripping — Repeated Use And Mechanical Stress Can Cause Motor Or Gear Failure.
• Electrical Connector Faults — Broken Wires Or Poor Contacts Can Disable Adjustment, Folding Or Heating Functions.
• Damage To Heating Element Or Temperature Sensor — Reduces Defogging/De-icing Efficiency.

Notes

This mirror is listed under codes 96457004XT and 8149VC which are commonly used by customers when searching for replacements for Peugeot 407 passenger-side mirrors. Inspect photos for the noted light scratch and verify that the color code (KTV) meets your vehicle’s finish requirements before ordering.

Product Overview

High-quality right (passenger side) exterior mirror designed for Peugeot 407 models. This mirror assembly delivers full electric adjustment, electric folding, integrated heating element and a temperature sensor. Finished in EZQ Paint Grey Manitoba (color code 8149VC), it restores both function and appearance after damage or electrical failure. Ideal for professional workshops and experienced DIY mechanics searching by product codes such as 96457004XT or 8149VC.

Key Features

• Electric Adjustment: Smooth motorized mirror positioning for accurate rearward visibility.
• Electric Folding: Power folding mechanism for convenience and protection in tight spaces.
• Heated Glass: Integrated heating element speeds de-icing and demisting in cold weather.
• Temperature Sensor: Provides ambient temperature input used by vehicle systems and improves climate control/anti-ice performance.
• OE Fitment Style: Designed to match original mounting points and electrical connectors for Peugeot 407.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407 (Saloon, Estate/SW, Coupe)
• Product Codes: 96457004XT, 8149VC
• Additional Numbers: EZQC (Color Code/Finish)

Compatibility Notes

This right-hand (passenger side) mirror is intended for Peugeot 407 variants. Always verify the part number and appearance match the original before installation. The assembly is supplied in EZQ Paint Grey Manitoba (8149VC), so it is ready for direct fit on vehicles with the same color code or for professional color matching.

Installation Recommendations

Recommended for experienced technicians and competent DIYers. Typical replacement procedure:

• Disconnect the negative battery terminal before starting work to prevent short circuits and protect electronic systems.
• Remove the interior triangle trim panel carefully using trim tools to avoid damaging clips or upholstery.
• Unfasten the mirror mounting bolts (usually three) located behind the trim and support the mirror while disconnecting the electrical connector.
• Fit the new mirror, connect the wiring harness, check all electrical functions (adjustment, folding, heater, temperature sensor) before final torqueing of bolts.
• Reinstall the trim panel and restore battery connection. Test mirror operation with the vehicle running and verify proper folding and heating functionality.

Use appropriate torque values and follow vehicle manufacturer procedures for safe and secure installation. Protect painted surfaces during removal and installation to avoid scratches.

Why This Part Commonly Fails

• Impact Damage: Side collisions and knocks are the most frequent cause of mirror replacement.
• Wear of Electric Motors: Repeated use and ingress of moisture can wear the mirror adjustment motors and folding actuators over time.
• Electrical Issues: Corroded connectors or damaged wiring can stop heating or folding functions from working correctly.
• Heating Element Failure: The demist/defog heater can fail after years of thermal cycling or due to internal damage.
• Environmental Exposure: Water ingress and corrosion reduce longevity, especially in older vehicles or where seals have degraded.

Practical Tips

• Test All Functions Before Final Reassembly: Verify adjustment range, folding action and heating to ensure a correct swap.
• Protect Against Moisture: Check sealing surfaces and connector grommets when installing to minimize future corrosion.
• Match Paint Code: For visible replacements, confirm the paint code (8149VC / EZQ) to reduce the need for respraying.

Conclusion

This right-hand exterior mirror assembly for the Peugeot 407 offers a direct-fit solution to restore electrical adjustment, folding and heating functions along with the ambient temperature sensor. Supplied in EZQ Paint Grey Manitoba (8149VC) and listed under product codes 96457004XT and 8149VC, it is a practical choice for workshops and self-repairing motorists seeking reliable OE-style replacement.

Key Features

This replacement right (passenger) exterior mirror is intended for Peugeot 407. It Provides Electrically Adjustable Mirror Glass, Electric Folding Mechanism And Integrated Heating With Temperature Sensor For Faster Demisting. The Factory Color Code Is KNN (Alcyon Blue) And The Unit Matches OEM Appearance And Functionality.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 407
• Product Codes: 96457004XT
• Additional Numbers: 8149VC, KNND

Compatibility

Fits Passenger Side (Right) Of Peugeot 407 Models Specified For This Mirror Assembly. Commonly Referenced By Part Numbers 96457004XT And 8149VC. Ensure The Mirror Matches The Vehicle’s Color Code And Connector Type When Ordering.

Installation Recommendations

• Prepare Tools: Trim Tool, Torx/Screwdriver Set, Ratchet With Appropriate Sockets, And Torque Wrench.
• Safety First: Disconnect The Battery Before Working On Door Electronics To Avoid Short Circuits When Handling Connectors.
• Remove Door Trim Carefully To Access Mirror Bolts And Electrical Connector; Preserve Clips And Fasteners.
• Unplug Electrical Connector And Unscrew Mounting Bolts From Inside The Door; Support The Mirror When Removing To Prevent Damage.
• Install New Mirror: Position Assembly, Tighten Mounting Bolts To Manufacturer Torque, Reconnect Electrical Connector And Replace Door Trim.
• Function Check: Verify Electric Adjustment, Folding Operation And Heating/Temperature Sensor Functionality Before Final Reassembly.
• If Electric Folding Or Heating Does Not Operate After Installation, Inspect Door Harness Connectors And Fuses; Some Vehicles Require Initialization Via Vehicle Settings.

Why The Part Most Often Fails

• Mechanical Damage From Impacts Or Parking Scrapes Is The Most Common Cause Of Mirror Replacement.
• Failure Of The Folding Motor Or Internal Gears Due To Wear Or Water Ingress, Leading To Loss Of Folding Function.
• Electrical Issues Such As Corroded Connectors, Broken Wires In The Door Harness Or Blown Fuses Can Disable Adjustment Or Heating.
• Heater Element Or Temperature Sensor Can Degrade Over Time, Slowing Demisting Performance.
• Paint Or Finish Damage From Stones, UV Exposure Or Chemical Contact Can Make Replacement Necessary For Cosmetic Reasons.

Additional Notes

This Mirror Is Supplied In The Specified Paint Code (KNN / KNND – Alcyon Blue). When Replacing An Electrified Mirror, Take Care With Door Trim Clips And Electrical Connectors To Avoid Additional Repair Costs. For Professional Results Use Proper Tools And Follow Vehicle Manufacturer Procedures.