This 165 mm (6.5″) replacement speaker is intended for use in a range of Citroën and Peugeot models and is commonly referenced by part numbers 9634826880, 6562X2 and 6562C5. Designed for professional workshops and experienced DIY mechanics, it provides a direct-fit replacement for factory door and rear parcel shelf speakers. The speaker restores correct acoustic balance in factory audio systems and is a straightforward swap for original equipment units when the original speaker has failed or degraded.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: See Fitment List Below
• Product Codes: 9634826880, 6562X2, 6562C5
• Additional Numbers: Diameter 165 mm (6.5″)

Fitment

Compatible with a number of Citroën and Peugeot vehicles (verify by comparing part numbers and speaker size on the original unit):

• Citroën C4
• Citroën C5
• Citroën C8
• Citroën Xsara
• Citroën Xsara Picasso
• Peugeot 207
• Peugeot 3008 I
• Peugeot 307
• Peugeot 407
• Peugeot 5008 I
• Peugeot 807

Installation Recommendation

• Disconnect the negative battery terminal before beginning work when removing interior trim components to avoid accidental short circuits and to reduce risk when working near airbags.
• Remove the door panel or parcel shelf trim carefully, retaining all clips and screws. Peel back any moisture barrier with care to avoid damage.
• Unplug the speaker connector and note polarity (positive/negative). Unscrew the original speaker and remove it from the mount.
• Fit the replacement speaker into the original location. Ensure the mounting holes and connector orientation match the factory position; use supplied adapters if necessary.
• Before full reassembly, test the speaker at low volume to confirm correct operation and polarity. Refit the moisture barrier and interior trim panels, securing all fasteners and clips.
• Use correct tools and, where needed, suitable sealing or anti-vibration materials to prevent rattles and water ingress.

Why The Part Most Often Fails

• Age-Related Wear: Foam surrounds and spider assemblies dry out and crack over time, causing distortion or loss of movement.
• Moisture Ingress: Water from leaked door seals or wet environments causes cone delamination, corrosion of terminals and short circuits.
• Overpowering: Sustained high volume or amplifier clipping can burn the voice coil or damage the cone assembly.
• Mechanical Damage: Impact or improper removal/installation can deform the cone or magnet structure.
• Connector Corrosion: Poor electrical contact due to corroded plugs or wiring corrosion reduces performance or causes intermittent sound.

Notes

Many customers search using OE part numbers (9634826880 / 6562X2 / 6562C5) — compare the code and diameter of your original speaker before ordering to ensure fitment. This unit is supplied as a direct replacement for the listed applications and is intended for professional or experienced DIY installation.