This replacement window and mirror control is suited for mechanics and experienced DIY enthusiasts working on Citroën C5 first and second generation models. The unit integrates the driver’s door master switch functions—power window control for one or multiple doors and electric mirror adjustment (function set depends on vehicle specification). Supplied as a used component, it represents a cost-effective solution when the original switch shows electrical contact wear, sticky buttons or cosmetic damage. Key search terms: Citroën C5 window switch, mirror switch, power window control, driver door switch, part numbers 96498424ZF / 96332289ZF / 6554AA.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C5 I (2001–2008) and Citroën C5 II (2008–2017)
• Product Codes: 96498424ZF, 96332289ZF, 6554AA
• Other Numbers: 96514300ZF, 6554HT

Installation Recommendations

• Work In A Dry, Well-Lit Area With Basic Trim Tools And A Multimeter For Verification.
• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Accidental Window Movement.
• Remove The Door Trim Carefully: Unscrew Fixings, Unclip Retainers And Lift The Panel Without Damaging Clips.
• Unplug The Wiring Harness From The Old Switch And Note Connector Orientation; Unclip Or Unscrew The Switch Module From The Door Armrest.
• Fit The Replacement Unit, Reconnect The Harness And Test All Functions (Each Window, Mirror Adjustment, Any Folding Or Heating Functions) Before Reassembling The Door Trim.
• After Installation, Verify Smooth Operation Of All Buttons And Listen For Unusual Noises From Window Motors Or Mirror Mechanisms.

Common Failure Reasons

• Electrical Contact Wear: Frequent Use Causes Pitting And Intermittent Operation Of Buttons.
• Moisture Ingress: Water Or Condensation Can Corrode Switch Contacts And Connectors.
• Mechanical Damage: Broken Buttons Or Mounting Clips Due To Forceful Operation Or Panel Removal.
• Poor Solder Joints Or Fatigued PCB Traces In Older Units Leading To Intermittent Or Total Failure.
• Faults In Connected Components: Sometimes A Faulty Window Motor Or Mirror Mechanism Is Misinterpreted As A Switch Failure—perform diagnostics Before Replacement.

Practical Tips

• Use A Multimeter To Check For Power And Ground At The Connector If A Window Or Mirror Doesn’t Respond.
• Compare Pinouts And Part Numbers When Replacing With An Alternative Unit; Many Codes Interchange Between Citroën And Peugeot Within The Same Platform.
• If Buttons Feel Sticky, Cleaning Contacts Or Replacing The Switch Is Often The Best Long-Term Fix.

Condition Note

Unit Is Used And May Show Cosmetic Signs Of Wear. Electrical Functions Have To Be Tested After Installation. No Additional Reconditioning Information Is Provided.