This replacement left (driver’s side) exterior mirror is designed for Peugeot 206 and Peugeot 206+ models and is supplied in paint code EKQ (Lucifer Red). Ideal for professional workshops and DIY enthusiasts, the unit is supplied ready for painting and fitting. Use the OE references below when searching or ordering to ensure quick identification: 96323811XT, 96432630XT, 8148YC.

Key Features

Durable housing matched to Peugeot body lines. Supplied painted to code EKQ (Lucifer Red) with the option to supply in alternative colors from stock. Designed as a direct-fit replacement to restore exterior appearance and functionality after impact or wear. Suitable for vehicles requiring a left-hand mirror assembly with compatible mounting points and connectors.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96323811XT, 96432630XT
• Other Numbers: 8148YC, EKQ

Installation Recommendations

• Verify That The Mirror Matches The Original Unit In Terms Of Mounting Points And Electrical Functions (Manual / Electric / Heated) Before Installation.
• Remove Interior Door Trim Or Triangular Trim Panel To Access The Mirror Fixing Bolts. Support The Mirror When Removing The Fasteners To Prevent Damage.
• Disconnect Any Electrical Connectors Carefully And Inspect For Corrosion Or Damaged Pins. Replace Damaged Clips Or Seals To Maintain Water Tightness.
• Tighten Fasteners To Manufacturer Torque Specifications And Refit Interior Trim Panels Securely.
• If The Unit Is Painted After Purchase, Ensure Proper Masking And Curing Procedures Followed For A Durable Finish.

Why This Part Most Commonly Fails

The most frequent cause of mirror damage on Peugeot 206 models is external impact (parking scrapes, collisions) leading to cracked housing or broken glass. Other common issues include wear of the folding mechanism, motor failure in electrically adjusted units, or water ingress causing connector corrosion. Regular inspection after minor impacts and prompt replacement of damaged seals or connectors will prolong service life.

For mechanics and DIYers: check the exact specification of the original mirror (electric adjustment, heating, folding) and use the listed product codes when ordering to ensure the correct variant. Searchable part numbers: 96323811XT | 96432630XT | 8148YC | EKQ — order the correct color or choose a primed unit for painting to match your bodywork.

Restore the look and function of your Peugeot 206 quickly with a direct-fit driver’s side mirror that meets OE mounting geometry and paint code requirements — order now to get the correct part for rapid repair.

This left driver’s side exterior mirror is a direct-fit replacement for Peugeot 206 models and is listed under common part numbers used by workshops and parts lookups. The unit arrives in Thorium Grey (KTH) paint and may show light surface blemishes as shown in the pictures. Ideal for professional mechanics and DIY enthusiasts who search by part number such as 96323811XT, 96432630XT or 8148YC when sourcing an exact match.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96323811XT, 96432630XT, 8148YC, 8148.YC
• Other Numbers: KTH (Paint Code – Thorium Grey)

Compatibility

Fits Driver Side For Peugeot 206 Range Including 206+. Confirm Fitment By Matching Part Numbers Listed Above. Designed As Exterior Mirror Assembly For Left-Hand Drive Vehicles Where Applicable.

Function And Description

Exterior Mirror Assembly For The Driver Side Provides Rearward Visibility And Houses The Mirror Glass, Adjustment Mechanism And Mounting Bracket. Depending On Vehicle Specification, The Assembly May Accommodate Manual Or Electric Adjustment Hardware And Wiring. This Unit Is Supplied Painted In Thorium Grey (KTH) And Shows Minor Surface Scratches.

Replacement Procedure

• Prepare Vehicle: Park On Level Ground And Disconnect Battery Before Working On Electrical Connectors.
• Remove Interior Door Trim Or Access Panel To Reach Mirror Mounting Nuts And Electrical Plug.
• Disconnect Electrical Connector And Remove Mounting Nuts/ Bolts Holding The Mirror Assembly.
• Remove Old Mirror And Compare Mounting Points And Connectors With New Unit.
• Fit New Mirror, Secure Mounting Nuts To Manufacturer’s Torque Specifications, Reconnect Electrical Connector And Reinstall Interior Trim.
• Test Mirror Adjustment And Any Heating Or Folding Functions Before Completing Job.

Common Failure Causes

• Impact Damage From Minor Collisions Or Door Swipes Causing Broken Housing Or Glass.
• Wear Of Adjustment Motor Or Mechanical Linkages Leading To Loss Of Adjustment.
• Corrosion Of Mounting Points Or Electrical Contacts Causing Intermittent Function.
• Water Ingress Or Wiring Damage From Door Seal Failures.

Installation Recommendations

Installation Is Straightforward For Experienced Technicians: Ensure Correct Alignment And Secure Fastening To Prevent Wind Noise Or Vibration. Match Paint Code KTH If Cosmetic Appearance Is Important. Replace Any Damaged Clips Or Seals During Installation To Maintain Water Tightness. When Reconnecting Electrical Connectors, Ensure Clean Contacts And Proper Routing To Avoid Pinch Points.

Why This Part Is Often Replaced

Exterior Mirrors Are Frequently Replaced Due To Everyday Impacts, Parking Incidents And Mechanical Wear Of Adjustment Mechanisms. Cosmetic Damage Such As Scratches Or Scuffs Also Drives Replacement When Visual Condition Matters.

High-quality left (driver’s side) exterior mirror compatible with Peugeot 206 series. Ideal for professional workshops and DIY mechanics looking for a direct-fit replacement by product code. The housing is painted in EYL (Iceland Grey) but other paint options are available from stock; unit is supplied ready to fit the vehicle body and restore original appearance and function.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96432630XT, 96323811XT, 8148YC, EYLC
• Additional Numbers: 8148.YC

Function

The mirror provides the driver with lateral and rearward visibility. Depending on the vehicle specification, the mirror housing can be painted to match the body colour. This replacement restores exterior appearance and sight-lines; electric adjustment or heating functions will be retained only if the unit corresponds to the original equipment specification for that vehicle.

Replacement Procedure

Typical replacement steps (general guidance): remove the small interior triangular trim or inner door panel to access the mirror mounting points, disconnect the electrical connector if the mirror is powered or heated, remove the retaining nuts/bolts, remove the old mirror and fit the new unit, reconnect the electrical connector and test all functions (adjustment, heating) before reassembling the door trim. Follow the vehicle manufacturer’s service manual for exact disassembly order, torque settings and trim removal to avoid damage.

Installation Recommendations

• Disconnect the battery before working on electrical connections to reduce the risk of short circuits or damage.
• Inspect wiring and connector terminals for corrosion or damage; replace or clean as necessary.
• When fitting, ensure correct alignment of the mirror glass and tighten fasteners to the manufacturer’s specification.
• After installation, verify mirror adjustment range and heating (if applicable) and check for wind noise at driving speeds.
• If unsure, have the replacement performed by a qualified technician with appropriate tools.

Most Common Failure Causes

Exterior mirrors on passenger vehicles most often fail due to impact damage (parking knocks, collisions), breakage of the mirror glass, water ingress causing motor or connector corrosion, and wear of the internal adjustment motor or mechanism. Painted housings can suffer scratches or paint chipping from road debris and repeated contact.

Why Choose This Part

Searching by product code is common among mechanics and DIYers — this listing includes the primary OEM codes (96432630XT, 96323811XT, 8148YC) to help you find the correct replacement quickly. The part is offered in the OE paint code EYL (Iceland Grey) and is supplied as a direct-fit unit suitable for Peugeot 206 models, enabling a fast and reliable repair.

Direct replacement left exterior mirror assembly designed for Peugeot 206 series. This unit restores the original appearance of the driver’s side and is ideal for professional workshops and DIY mechanics who need a reliable, ready-to-fit spare part. Frequently searched by part numbers, the mirror matches OE references and comes painted in EZRC (Aluminum Grey) but is also available in other colors from stock.

Benefits

– Direct fit for quick replacement, saving time in the workshop.
– Painted finish reduces preparation work and ensures consistent color match.
– Suitable for routine collision repairs and panel replacement jobs.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96432630XT, 96323811XT, 8148YC
• Additional Numbers: EZRC

Installation

Replacement is straightforward for technicians familiar with door trim removal. Typical steps:

• Remove the inner door trim and the triangular sail cover to access the mirror mounting area.
• Disconnect any electrical connectors (adjustment motor/heating) before loosening the mounting nuts.
• Unscrew the mirror fixing nuts from the door and carefully remove the old unit.
• Fit the new mirror, align the mounting studs, tighten the nuts to the manufacturer’s recommended torque, reconnect electrical connectors and test all functions.
• Reinstall the door trim and verify mirror adjustment and heating (if fitted).

Installation Recommendations

– Use proper trim tools to avoid damaging clips and panels.
– If the unit has electrical functions, disconnect the battery before working to prevent short circuits and then test functions after reconnection.
– Check gasket/seal condition and replace if necessary to avoid water ingress.

Common Failure Causes

• Impact Damage: Collisions or knocks are the most frequent causes—broken housings or cracked glass.
• Water Ingress: Moisture can corrode connectors or cause motor failure on electrically adjustable mirrors.
• Wear And Loosened Fixings: Vibration and long-term use can loosen mounting points or wear the adjustment mechanism.
• Paint And Surface Damage: Scratches and chips from road debris or minor impacts.

Part numbers shown are commonly used when searching for this component. Ensure you select the left/driver side mirror and the correct finish code (EZRC) for an accurate match. This product is aimed at professional mechanics and skilled DIYers performing bodywork or mirror replacement on Peugeot 206 models.

Due to wear and tear or accidental damage, side mirrors can often require replacement. This mirror allows for clear visibility, ensuring that drivers can easily monitor their surroundings, reducing blind spots, and enhancing safety on the road. Remember to check the compatibility of the part numbers to ensure that this mirror is suitable for your vehicle.

Technical Information

• Manufacturer: Peugeot
• Model: 206
• Product Codes: 96323811XT, 96432630XT
• Other Numbers: 8148YC, KMFD