Part description

This used window winder is for the right rear window and is suitable for Citroën C4 Picasso and Grand Picasso cars. It is an important part of the electric window control, which ensures smooth movement of the glass when opening and closing.

Auto mechanics and home repairers often look for this part by a specific designation, because matching the number makes the correct selection much easier. The advantage is the possibility of replacing the worn or non-functioning original mechanism with a well-preserved original part from the Stellantis Citroën Peugeot group.

• Part Type: Power Window Mechanism
• Location: right rear side
• Car side: behind the passenger
• Usage: compensation in the event of a window download failure, stuttering or non-functioning scrolling

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Citroën C4 Picasso, Citroën Grand Picasso
• Other numbers: 9682632080

Product codes

Product codes: 9224E4, 9682632080

Models from labels/backgrounds: Citroën C4 PICASSO

Installation recommendations

For this part, the procedure typically applies to the electric window mechanism. The exact method of disassembly and assembly may vary depending on the specific design of the car and the design of the door.

1) Before assembly

• Check that the right rear side and the overall design of the part match the old mechanism.
• Compare codes 9224E4 and 9682632080 if they are legible on the original part.
• Inspect conduits, cables, attachments and mounting points for damage or deformation.
• Check the condition of the connectors and moving parts, remove dirt if necessary.
• Before working, it is advisable to disconnect the battery, especially if you are going to handle the electrical installation of the door.

2) Necessary tools and materials

• regular set of screwdrivers and sockets
• plastic levers for panel removal
• gloves and protective equipment
• cleaning agent for removing dust and dirt
• or a suitable agent for light lubrication of the guide parts, if the condition of the mechanism requires it

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and prepare a work area.
2. Disconnect the battery if you are going to disconnect the door electrical connectors.
3. Remove the inner lining of the rear right door in a suitable manner to avoid damaging the handles.
4. Carefully remove protective layers or coverings that prevent access to the mechanism.
5. Check the position of the glass and secure it against spontaneous movement.
6. Disconnect the window retract mechanism electrical connector.
7. Unfasten the original mechanism and carefully remove it from the door.
8. Compare the old and new part by shape, fit, connectors and product numbers.
9. Place the replacement mechanism in place and seat it into the correct position without force.
10. Step by step fix the mechanism to the mounting points and connect the electrical connector.
11. Connect the glass to the mechanism according to the design of the original solution and check for free movement.
12. Before final assembly of the door, try the function of lowering and raising the window.
13. After verifying correct function, put back the protective layers and install the door trim.
• 4) Post-assembly checks and test drive/function verification
  • Retry the entire window movement range.
  • Observe that the window moves smoothly, without warping, stuttering, or unusual noises.
  • Check that the glass fits correctly in the upper and lower positions.
  • After folding the door, check that nothing rattles anywhere and that the wiring is not pinched.
  • During a short drive, check whether there are any door panel vibrations or noise from the window.

  5) The most common assembly mistakes + how to avoid them

  • Reversing the part side – always compare that it is the right back side.
  • Product number mismatch – check code and connector match before assembly.
  • Door panel damage – use plastic pry bars and proceed without excessive force.
  • Incorrect glass seating – before final tightening, check for smooth operation and correct guidance.

  Reasons why the part is damaged

  • normal mechanical wear and tear during long-term use
  • increased stress when frequently pulling in and out of the window
  • stiffness or resistance in the glass guide
  • damage to cables or moving parts of the mechanism
  • intrusion of moisture, dirt or corrosion into the door area
  • overload when trying to download a frozen or blocked window
  • unprofessional prior assembly or violent handling
  ]]>