High-quality used right front window regulator mechanism for Citroën Xsara 5-door vehicles, supplied under part number 9222L0. Designed for mechanics and skilled DIYers, this electric window regulator restores reliable up-and-down movement of the front passenger window. The unit is suitable when the window slides unevenly, sticks, or the motor/cable assembly has failed. The compact, direct-fit design reduces installation time and returns correct window alignment and sealing.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën Xsara 5-door (Right Front)
• Product Codes: 9222L0
• Other Numbers: —

Compatibility

Fits Citroën Xsara 5-door models requiring part number 9222L0. Always verify the part number listed on the existing regulator before ordering to ensure a direct replacement.

Function and Common Failure Modes

The window regulator assembly guides and moves the door glass vertically. It typically consists of a motor (for power windows), cable or scissor mechanism, and mounting brackets. Common causes of failure include:

• Cable Wear Or Fraying: Leads To Slipping, Jamming Or Loss Of Movement.
• Motor Wear Or Electrical Faults: Reduced Torque Or Intermittent Operation.
• Guide Or Track Damage: Causes Uneven Movement And Extra Load On Motor.
• Corrosion And Water Ingress: Accelerates Mechanical Wear And Causes Electrical Issues.

Replacement Guide

Basic steps for replacing the right front window regulator (for experienced technicians and competent DIYers):

• Disconnect Battery: Always disconnect the negative battery terminal before working on electrical components to avoid short circuits.
• Remove Door Trim: Carefully remove the inner door trim and vapor barrier to access the regulator and motor.
• Support Window Glass: Secure the window glass in the up position with tape or a support to prevent it from dropping.
• Disconnect Wiring: Unplug the regulator/motor electrical connector (note the 2-wire connector configuration).
• Detach Glass From Regulator: Loosen the mounting bolts that secure the glass to the regulator mechanism.
• Remove Regulator Assembly: Unbolt the regulator and motor from the door shell and extract the unit.
• Install New Regulator: Position the new regulator, loosely fit bolts, reconnect the glass, then tighten fasteners and reconnect the wiring.
• Test Operation: Reconnect the battery, cycle the window several times to confirm smooth operation and correct alignment, and adjust as required.
• Reassemble Door: Refit the vapor barrier and door trim, ensuring no wires are pinched and all clips are secured.

Mounting Recommendations

• Use Correct Fasteners: Replace any damaged bolts or clips with OE-equivalent hardware to ensure secure mounting.
• Lubricate Tracks: Lightly lubricate guide rails with a suitable silicone or lithium-based grease to reduce friction and prolong life.
• Check Window Alignment: After installation, verify glass alignment and sealing to prevent wind noise and water ingress.
• Electrical Check: Inspect connector contacts for corrosion and clean before reconnection. Ensure proper insulation and routing of wiring harness.

Why This Part Fails Most Often

Window regulators commonly fail due to mechanical wear of cables or gear teeth, motor burnout from repeated heavy use, water-related corrosion inside the door, or damage from broken glass or impact. Preventive maintenance—keeping tracks clean and lubricated and avoiding forcing a stuck window—extends service life.

Notes

Part Number Reference: 9222L0. This description is based on available part data for Citroën Xsara 5-door right front window regulator assemblies.