The electric rear door lock for the Citroën C-Crosser and Peugeot 4007. The original part of the PSA concern with the code 9137N0 ensures safe locking and unlocking of the door within the central locking system. Suitable as a replacement for a non -functional lock (manifestations: does not unlock/does not lock on the first attempt, reacts only sometimes, clicks without moving the pull, it is not possible to open from the outside/from the inside).

The part is designed for the left rear doors (LH rear) and comes as a complete electric lock module. The construction combines a mechanical latch and an electric motor with microswitches; Over time, motorbikes or microswitches may wear or fatigue plastic gears. Replacing the entire lock to restore the correct functioning of central locking and secure door.

Installation is usually a direct confusion for the original piece. In practice, the removal of the door filling is procedure, disconnecting the external/internal handles, clinging the locking, disconnecting the electrical connector and dismantling the locking screws of the lock; Subsequently, the new module in the opposite sequence is installed. It is recommended to compare the part number 9137N0 and the type of connector (number of pins) with your original lock before assembly.

• Restoring reliable central locking of the rear door
• Suitable for Citroën C-Crosser and Peugeot 4007 (typically years of manufacture 2007–2012)
• left rear lock (LH rear) – correct orientation is essential
• Simple replacement with conventional service tools

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C-Crosser; Peugeot 4007
• product codes: 9137n0
• additional numbers: 9137 N0; 9137.n0

Tip for diagnostics: If the rear left doors do not respond to the DO, but the other doors do, there is a defect in this lock/actuator. Also check the bundle in the bushing between the body and the door to ensure that the power line is not damaged.

Lock control cable set for left rear doors designed for Citroën C -Crosser and Peugeot 4007. This is the original part of the dog, which replaces worn or cracked cable and restores the correct functioning of internal and outer handles. Suitable for repairs where the handle goes “empty”, the door does not open from the outside/inside or is running the lock. OEM Codes: 9151CN, 9151CQ.

The control cable (bowden) mechanically connects the inner and outer handle to the door lock. The exact length and ending of the endings ensure trouble -free deployment without modification and reliable function after assembly. This set is designed for the left rear door and fits the door lock with 9137N0.

Typical defects that this replacement solves: broken or pulled out cable, cracked plastic ending at the handles/lock, a stiff bowden due to dirt and moisture. In older cars, the replacement of the cables is a frequent and quick solution of non -functional door opening.

Assembly Recommendations: Remove the rear door fill, disconnect the handles of the handles and burst the original cables from the lock and the handle. Remove the new rope in the same way as the original, click the endings into the lock and click, check the correct settlement in the holders. Before closing the filler, try the operation of click from outside and from the inside and the function of the children’s fuse; Alternatively, lubricate the mechanism with a suitable lubricant.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C -Crosser (left rear door), Peugeot 4007 (left rear door)
• product codes: 9151Cn, 9151CQ
• Other numbers: 9137n0 (lock to which the cable fit)

If your rear left door does not respond to the handle, the replacement of these ropes is a quick and cost -effective repair. Thanks to the original parameters for C -Crosser and 4007 you get accurate landing, proper operation of the lock and reliable door opening without the need for modifications.