The right front door lock for the Citroën C -Crosser and the Peugeot 4007. This is an original part of the PSA production, which ensures mechanical connection of the door handle to the lock and reliable opening from the inside and from the outside. Ideal replacement for damaged or pulled cable (bowden) of the castle, often also sought under OEM codes 9151CG and 9151CJ.

Functions and typical manifestations of defects: The cables transmit the tension from the inner/outer handle to the lock mechanism. During wear, there may be difficult opening, a great will in the handle, the need to “drag” the handle or the inability to open the door. Most often, the ends of the cable and sections in sharp bends leave, where the cable is pulled or stuck over time.

Installation Note: Replacing is performed after the door fill is removed. After reversing the clamps and bolts, carefully remove the tapecírunk, disconnect the rods from the handle and lock and attach the ropes in the same line as the original (pay attention to the correct ending). For the right front doors (for cars with left -hand drive a party of the passenger), we recommend checking the status of the plastic clips of filling and possibly replace them. Torx screws and clips are usually used to disassemble.

Compatibility: Designed for Citroën C – Crosser and Peugeot 4007. These cars were produced in 2007–2012; The ropes are the right front door for the position. Before purchasing, compare the OE/OEM number and the location of the part on the car so that the assembly and function are 100% identical to the original part.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C -Crosser (2007–2012), Peugeot 4007 (2007–2012), right front doors
• Product codes: 9151cg, 9151CJ
• additional numbers: 9136CQ, 91356CQ

Advantages of the original part: the exact length and ending of the ropes for the correct operation of the castle, quiet and smooth operation without stuck and long life in the correct guidance. To be sure, always compare the shape/ends of the cable and the above codes with your original work.

Original electric front door lock (passenger) for Citroën C-Crosser and Peugeot 4007. Complete lock module with integrated central locking actuator ensures smooth unlocking/locking, safe finish and proper function sensors. Ideal replacement for a failure of central locking or mechanical wear of the original part.

Suitable solution for car repair and home repairs: thanks to the accurate match of attachment and connector, the installation is straightforward and without the need for modifications. The original part from the PSA concern provides the right compatibility with the car electronics, including features such as Deadcko (double lock) or opening blocking when driving if the car is equipment.

Typical symptoms of defective door lock: The door cannot be unlocked/locked by the central, accidental unlocking, clicking without the movement of the latch, the need for multiple control of the driver, or the impossibility of opening from the inside or from the outside. The replacement prevents further wear of the rods and handles and restores the reliability of everyday use.

Mounting tips: Remove the door panel, release the vapor -proof foil, disconnect the handles/cable pipes and the lock connector. The lock is usually attached by three screws on the edge of the door; After unscrewing them, remove the lock together with the latch leash. Before the final closure of the filling, test the function of the central locking and the correct operation of the click from the outside and the inside. Pay attention to the confusion of the pages – this part is designed exclusively for the right front door.

Compatibility: Citroën C-Crosser and Peugeot 4007 (SUV, common platform), model years approximately 2007–2012. Before purchasing, we recommend verifying the conformity of the Part code and the connector with your car.

technical information

• manufacturer: dog (Citroën/Peugeot) – original part
• Model: Citroën C-Crosser (about 2007–2012), Peugeot 4007 (about 2007–2012)
• product codes: 9136CQ, 9136.CQ
• additional numbers: 9136 cq

For the correct selection, compare the code from your original lock, position (front right door) and connector type. This part is suitable as a direct replacement without modifications and restores the full functionality of central locking and secure door closing.