Part description

A used door handle for Citroën C3 II (A51) and DS3 cars is a suitable choice for replacing a damaged or non-functional original part. Thanks to the marking 9101KZ, the part is easy to find by product number, which will be appreciated by both car repair shops and home mechanics during bodywork repairs.

This part is designed for the left rear and right front and rear doors. Another advantage is the color version HVD – GRAY CHINE COVERS, which can facilitate replacement without the need for additional appearance modifications.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Citroën C3 II (A51), DS3
• Other numbers: HVD

Product codes

• Product codes: 9101KZ
• Models: Citroën C3 II, DS3

Installation recommendations

Generally/typically for this type of part, the exact procedure for replacing a door handle may vary depending on the specific car design and door construction. Below is a safe and practical general procedure for replacing a door handle.

1) Before assembly

• Check that the part shape, fit, orientation and product number 9101KZ match the old piece.
• Compare the color design and overall condition of the visible part of the handle.
• Check for damage to attachment points, latches or seating surfaces.
• Before assembly, check the smooth operation of the mechanical part of the handle.

2) Necessary tools and materials

• Set of common hand tools
• Screwdrivers and plastic levers for panel removal
• Cleaning agent for degreasing
• A soft cloth or tea towel
• Possibly protective gloves

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and open the appropriate door.
2. Remove the interior door trim if needed to access the handle.
3. Carefully loosen the covers and fasteners that hold the original handle.
4. Disconnect any mechanical tie rod or connected control part, if the handle is handled in this way.
5. Remove the old handle so as not to damage the paint, seal or surrounding parts of the door.
6. Clean the mating surfaces and check that there are no dirt or loose parts left at the mounting point.
7. Compare the old and new part side by side, especially the fit, length and shape of the functional parts.
8. Place the new handle in place and make sure it fits correctly without force.
9. Reattach all mechanical linkages and attach the handle in the original manner.
10. Before completing the paneling, test the operation of the handle several times and the correct opening function.
11. Reinstall the door trim and all covers.
12. Do a final look, fit and function check.
• 4) Post-assembly checks and test drive/function verification
  • Verify that the crank operates smoothly without stuttering.
  • Check that the door opens and closes properly.
  • Check that the handle fits correctly and that there is no excessive play.
  • After a short period of use, recheck the attachment and stability of the part.

  5) The most common assembly mistakes + how to avoid them

  • Exchanging the side or the design of the part – always carefully compare the original and the new part before assembly.
  • Door trim damage during disassembly – use suitable plastic levers and work carefully.
  • Incorrect seating of the handle – the part must fit naturally, without forceful tightening.
  • Omission to check the function before folding the door – always test the mechanical operation first.
  • Damage to paintwork or surrounding surfaces – when handling, protect the surroundings with a clean cloth and do not work with unnecessary brute force.

  Reasons why the part is damaged

  • Normal wear from frequent door use
  • Mechanical damage due to careless opening or impact
  • Influence of weather conditions and material aging
  • Damage to the attachment or connecting mechanism of the door
  • Unprofessional prior disassembly or assembly
  ]]>