Exterior door handle for Peugeot 3008 I and 5008 I in Ruby Red (EPY). Ideal for professional workshops and DIY mechanics searching by part code 9101KH or EPYD. This replacement outer handle restores door opening function and appearance while matching factory paint. Suitable for vehicles with mechanical or central-locking actuation; ensure compatibility with your door lock cylinder arrangement before installation.

Key Benefits

Durable exterior finish matched to factory Ruby Red paint. Direct-fit design for clean installation, reduces installation time in bodyshop and garage settings. Restores proper latch actuation and prevents water ingress around the handle area when fitted correctly.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model(s): Peugeot 3008 I, Peugeot 5008 I (First Generation)
• Product Codes: 9101KH, EPYD
• Other Numbers: Color Code EPY – Ruby Red

Fitment

Specifically produced for the right front door and both left and right rear doors on first-generation Peugeot 3008 and 5008 models. Check side and door position when ordering (Right Hand Drive vs Left Hand Drive does not affect side designation for the handle itself).

How To Replace (Overview)

1. Remove interior door trim: unscrew fasteners and carefully pry trim clips to avoid damage.
2. Peel back the waterproof membrane to access the inner door shell.
3. Disconnect any electrical connectors if the handle has sensors or switches.
4. Unbolt or unclip the handle from the inside of the door. Detach linkage rods from the latch mechanism.
5. Transfer lock cylinder or trim pieces if required, then fit the new handle and reconnect linkage.
6. Test mechanical movement and central locking operation before reassembling the door panel.
7. Reattach the waterproof membrane and interior trim, ensuring all clips and screws are secure.

Mounting Recommendations

Work On A Flat Surface And Keep Parts Organized. Use Proper Trim Tools To Avoid Breakage Of Clips. Lubricate Moving Linkages With Suitable Grease (e.g., White Lithium) To Prevent Stiff Operation. Tighten Fasteners Evenly Without Over-Torquing; Replace Any Damaged Clips Or Gaskets To Maintain Water Tightness. After Installation, Check Door Alignment And Central Locking Function On All Doors.

Why This Part Most Commonly Fails

• Mechanical Wear: Frequent use leads to worn pivots or weakened plastic components inside the handle mechanism.
• Impact Damage: Door hits, parking lot knocks or forced entry attempts can crack the handle or break mounting tabs.
• Corrosion And Environmental Stress: Salt, moisture and dirt can corrode metal linkages or cause paint and seal deterioration—more common in colder climates.
• Broken Clips And Fasteners: Interior mounting clips are often plastic and can fail during previous repairs or from vibration over time.

Notes

When replacing, compare the part codes printed on the old handle to the Product Codes listed above (9101KH / EPYD) and confirm color code EPY for paint match. Professional installation is recommended for best fit and sealing, especially on vehicles with integrated central-locking switches or alarm sensors in the handle area.

Exterior door handle finished in EZRC Gray Aluminium, designed for mechanics and DIY enthusiasts working on Peugeot 3008 and 5008 (first generation). This replacement part matches the original appearance and mounting points, making it a direct-fit option for restoring exterior trim and door function. Commonly searched under code 9101KH, the handle is suitable for restoring damaged or worn door handles after impacts, plastic breakage or finish deterioration.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: PEUGEOT 3008 I, PEUGEOT 5008 I
• Product Codes: 9101KH
• Additional Numbers: EZRC; Color: Gray Aluminium (LAK ŠEDÝ ALUMINIUM)

Fitment And Function

This handle is intended for the right front door and both left and right rear doors on first‑generation Peugeot 3008 and 5008 models. It operates the door latch mechanism and, depending on vehicle equipment, may work together with central locking rods or electronic actuators. The part restores normal opening/closing and external aesthetics.

Typical Failure Modes

Door handles of this design most often fail due to mechanical stress and plastic fatigue: broken mounting tabs, snapped levers, or wear on pivot points. Additional causes include impact damage (parking collisions or vandalism), corrosion of internal metal parts, and paint/finish peeling after long exposure to weather. Handles on vehicles with frequent heavy use or cold climates can become stiff or crack when frozen.

Replacement Procedure (Overview)

Replacement requires basic workshop skills and common tools.

• Remove interior door trim panel to access handle mounting bolts and linkage.
• Disconnect any electrical connectors or central locking rods attached to the handle.
• Unscrew or unclip the handle retaining bolts/screws and free the old handle from the door shell.
• Fit the new handle into position, reconnect linkage and connectors, and secure fasteners to original locations.
• Test latch and locking function before refitting the door trim and finalizing assembly.

Installation Recommendations

• Keep door clips and insulating foam intact where possible; replace any damaged clips to avoid rattles.
• Lightly lubricate pivot points and latch contact areas with suitable grease to ensure smooth operation.
• Check alignment and smooth operation of the latch before reassembling the door trim.
• If the vehicle has electric components near the handle (sensors, switches, or actuators), handle wiring carefully and disconnect the battery if required by the vehicle repair manual.
• Use appropriate trim tools to avoid damaging panels; if unsure, have the replacement performed by a professional technician.

Why Replace This Part

Replace the handle when it is cracked, loose, does not return to its rest position, or when the paint/finish is severely damaged. A faulty exterior handle can prevent door entry or cause secondary damage to the latch assembly if left unattended.

Search Tips: Customers often find this part by the code 9101KH or by searching for EZRC Gray Aluminium door handle for Peugeot 3008 / 5008.