Description

Exterior right rear door handle designed for Peugeot 406, finished in Rhodes Blue (Color Code KMP). This replacement part restores correct operation and appearance of the passenger-side rear door. It is suitable for mechanics and DIY enthusiasts who require a direct-fit handle that matches the original color and mounting points.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 406
• Product Codes: 9101H5, 9621859377
• Additional Numbers: KMP (Color Code), KMPD

Compatibility And Fitment

Fits right rear (passenger-side rear) door of Peugeot 406. Confirm fitment by comparing the listed product codes (9101H5 / 9621859377) and color code KMP with the original part. Designed as a direct replacement that mounts to the factory points and links to the existing latch and rod mechanisms.

How The Part Functions

The exterior door handle provides the mechanical interface to open the rear passenger door from the outside. It transfers the manual pull force via internal linkages or rods to the door latch assembly. Proper alignment and secure mounting are essential for smooth operation and to avoid premature wear of the latch or handle mechanism.

Installation Recommendations

• Required Tools: Trim removal tools, Torx/Phillips screwdrivers, 8–10 mm sockets, pliers, and a flashlight.
• Procedure Summary: Remove inner door trim to access mounting screws and linkage; unclip or unbolt the old handle; detach linkage rods and any retaining clips; install new handle, reconnect linkage, secure fasteners, and reassemble door trim. Check operation of latch and key/lock cylinder if applicable.
• Time Estimate: Approximately 30–60 minutes for an experienced mechanic; longer for first-time DIYers.
• Practical Tips: Use plastic trim tools to avoid damaging clips and trim; keep track of small clips and screws; lubricate latch points with appropriate lubricant after installation and test door operation several times.

Most Common Reasons For Failure

• Wear And Fatigue: Repeated use causes plastic or metal components in the handle to wear or fracture.
• Corrosion: Salt and moisture can corrode fasteners or internal linkages, leading to stiffness or breakage.
• Impact Damage: Door dents or impacts (parking incidents, attempted break-ins) can crack or dislodge the handle.
• Frozen/Seized Mechanism: In cold climates, moisture can freeze inside the mechanism, stressing components when forced.

Why Choose This Part

This handle matches the original mounting geometry and color code KMP (Rhodes Blue), ensuring a discreet repair that preserves the car’s exterior appearance. Clear product codes (9101H5 / 9621859377) make it easier to find the correct replacement during ordering.

Description

Replacement right rear (passenger side) exterior door handle designed for Peugeot 406. Ideal for professional mechanics and DIY enthusiasts who need a direct-fit part identified by common OEM references 9101H5 and 9621859377. The handle matches color code ETHC (Gray Metallic) and restores original function and appearance to the rear passenger door. Keywords: Peugeot 406 right rear door handle, 9101H5, 9621859377, ETHC Gray Metallic, replacement door handle.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 406
• Product Codes: 9101H5, 9621859377
• Additional Numbers: Color Code ETHC (Gray Metallic)
• Location: Right Rear Door (Passenger Side)

Installation Recommendations

Intended for fitment by experienced technicians or competent DIYers. Typical replacement procedure:

1. Open the rear passenger door and remove the interior door trim panel (carefully unclip plastic retainers and remove any screws).
2. If present, disconnect electrical connectors for central locking or courtesy lights. If the handle assembly includes electrical parts, ensure the battery is disconnected before working on electrics.
3. Remove the retaining bolts or screws securing the exterior handle and detach the linkage rods from the handle mechanism.
4. Extract the old handle, compare with the new part to confirm matching mounting points and color code, then install the new handle in reverse order.
5. Reconnect linkages and electrical connectors, test door open/close operation and central locking function, then re-fit the door trim and fasteners.

Use common hand tools (trim removal tools, Torx/Sockets as required). Avoid forcing plastic clips; replace damaged clips to ensure secure reassembly.

Why This Part Fails Most Often

• Mechanical Wear: Repeated use causes internal levers and pivots to wear, leading to handle slippage or failure to operate the latch.
• Plastic Fatigue: Many handle assemblies use plastic components that become brittle with age and break under load.
• Corrosion and Moisture Ingress: Salt and moisture can corrode metal parts or seize pivot points, especially in older vehicles or regions with winter road salt.
• Impact Damage: Door impacts or attempted forced entry often deform or break the exterior handle.

Notes

This part is often searched by its product numbers (9101H5, 9621859377) and by color code (ETHC). Ensure the handle matches the passenger-side rear door specification of the Peugeot 406 before ordering. Correct installation restores proper operation of the door latch and maintains the vehicle’s exterior appearance.

Product Overview

This right rear door handle is a direct-fit replacement for the Peugeot 406 passenger-side rear door. It matches Paint Code EKQD (Lucifer Red) and corresponds to product references often listed as 9101H5 and 9621859377. Ideal for professional workshops and DIY mechanics who need a tidy exterior finish and reliable door operation. Frequently searched by part numbers, this handle helps restore proper latch operation, improves door aesthetics, and preserves vehicle value after wear or minor collisions.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 406
• Product Codes: 9101H5, 9621859377
• Other Numbers: EKQD (Paint Code – Lucifer Red)

Installation Recommendations

Recommended for installation by experienced technicians or competent DIY mechanics. Typical replacement steps:

1. Remove the interior door trim to access the handle retention points and linkages. Keep fasteners and clips organized.
2. If present, disconnect any electrical connectors for central locking or sensors. If the handle incorporates wiring, isolate the battery before disconnecting electrical connectors as a safety precaution.
3. Unscrew or unclip the retaining bolts and carefully release the internal rods or cables from the handle mechanism.
4. Fit the new handle, reconnect rods/cables and electrical connectors, and secure all fasteners to the original positions. Replace broken clips with new ones where needed.
5. Reinstall the door trim, then test mechanical opening/closing, central locking, and door alignment. Check that the latch engages smoothly and that the handle movement is free of binding.

Use appropriate tools to avoid damaging painted surfaces. If corrosion or latch damage is present, address those issues before final assembly.

Why This Part Commonly Fails

• Mechanical Wear: Repeated use eventually wears the pawls, pivots, or plastic housings, causing looseness or failure to operate the latch.
• Plastic Fatigue: Internal plastic components and mounting clips become brittle over time from UV and temperature cycles and can crack or break.
• Impact Damage: Minor collisions or door strikes frequently crack external handle shells or deform the mounting points.
• Corrosion and Seizure: Moisture ingress can corrode metal linkages or fasteners, leading to stiff or non-functional operation.

Search Tip: This part is commonly listed under codes 9101H5 and 9621859377 and by paint code EKQD (Lucifer Red). Use these identifiers when looking up the part for faster results.

Final Notes

Replacing the door handle restores proper function and appearance. When in doubt about internal latch condition, inspect the latch assembly and rod connections while the door trim is removed to avoid repeat repairs.