Replace a worn or damaged driver’s door handle with this direct-fit left front door handle for the Peugeot 406. Painted in EKQD “Red Lucifer”, this handle is a practical option for mechanics and DIY enthusiasts who need a color-matched exterior part that restores function and appearance. The part is commonly searched by code 9101H2, which makes finding the correct replacement faster when ordering or browsing online.

Key Benefits

• Direct fit for Peugeot 406 driver’s door — designed to match original mounting points and linkage.
• Factory color code EKQD (Red Lucifer) for better paint match and reduced refinishing time.
• Restores latch operation and exterior appearance after mechanical breakage or impact damage.
• Suitable for professional workshops and competent DIY repairers familiar with door trim removal.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 406
• Product Codes: 9101H2
• Additional Numbers: EKQD (Paint Code – Red Lucifer)

Installation Recommendations

Recommended for fitment by an experienced technician or an informed DIYer. Typical replacement steps:

• Prepare basic tools: trim removal tools, screwdrivers, socket set and pliers. Protect painted surfaces with masking tape.
• Remove interior door card carefully to access handle mounting and linkage. Keep fasteners and clips organised for reassembly.
• Disconnect any rods or clips that link the handle to the latch and unlock mechanism. Note their orientation for correct reinstallation.
• Unscrew the handle retaining bolts, remove the old handle and fit the replacement in reverse order. Ensure gaskets/seals are correctly seated to prevent water ingress.
• Check operation of the lock, latch and central locking (if fitted) before refitting the door card. Lubricate moving parts with appropriate grease for smooth operation.
• After installation, test the handle from both outside and inside to confirm secure fit and correct function.

Why This Part Most Commonly Fails

• Mechanical wear: Repeated use causes internal plastic or metal components to weaken and eventually break.
• Broken Mounting Tabs: Impact from dents or door slam can snap mounting tabs or deform the handle assembly.
• Corrosion and Water Ingress: Rust in the latch area or water infiltration can seize mechanisms and cause associated stress failures.
• Paint Damage: External handles are exposed to weather and may chip or fade; while cosmetic, damaged paint can accelerate material degradation.
• Rod/Clip Fatigue: Linkage clips or rods that connect the handle to the latch can detach or snap, making the handle inoperative.

Tip: When replacing the exterior handle, inspect the latch, lock cylinder and linkage for wear. Replacing worn complementary parts at the same time reduces the chance of repeated labor.

Search by product code 9101H2 to quickly locate this exact part for Peugeot 406 applications. Suitable for professional repairs and competent DIY installations.

This used left front door handle is a direct-fit replacement for Peugeot 406 driver doors, coded EZR and referenced under product code 9101H2. Designed for technicians and DIY enthusiasts, the handle restores reliable door access and a factory-like appearance. The neutral grey aluminium paint finish blends with original trims and is suitable for vehicles where the external handle shows wear, paint damage, or mechanical failure. Part number 9101H2 and color code EZR are often used when searching for this component in catalogs or online.

Key Benefits

• Direct Fit For Peugeot 406 Driver Door — Quick Replacement With Standard Tools.
• Preserves Original Look With Grey Aluminium Paint (EZR).
• Useful For Repairing Sticking, Loose Or Broken Exterior Handle Mechanisms.
• Product Code 9101H2 Included For Easy Identification And Searchability.

How The Part Works And Common Faults

The exterior door handle provides the mechanical interface to operate the door latch from outside the vehicle. Over time the plastic internal components, mounting tabs or the linkage can crack, wear or corrode, which leads to loose movement, failure to release the latch, or intermittent operation. Paint wear and surface damage are cosmetic issues often caused by frequent use or exposure to elements. Typical failures are mechanical (broken lever, snapped clips) or wear-related (worn pivot bushings or linkage).

How To Replace

• Prepare Tools: Trim Removal Tools, Phillips And Flat Screwdrivers, Torx Set, Socket Set And Ratchet, Pliers.
• Remove Door Trim Panel: Pry off trims carefully, unscrew retaining screws, and lift the panel away to access the inner door.
• Disconnect Linkages: Disconnect interior rods/linkages from the handle assembly and detach any electrical connectors (if fitted) such as central locking actuators.
• Remove Handle Fasteners: Unscrew the bolts or nuts securing the exterior handle from the inner door shell and remove the old handle.
• Install New Handle: Fit the replacement handle into position, secure fasteners to correct torque, reconnect linkages and any connectors, then test operation before reassembling the door trim.
• Final Check: Ensure Smooth Operation Of Locking And Handle Movement; Adjust Linkage If Needed.

Installation Recommendations

• Work On A Stable Surface And Protect Interior Trim From Damage During Removal.
• Keep Fasteners Organized And Note Their Original Positions To Avoid Mistakes On Reassembly.
• Replace Any Broken Clips Or Grommets During Installation To Ensure Correct Fit And Prevent Rattles.
• Test Door Locking And Latch Operation Several Times Before Final Reassembly.
• If Central Locking Actuator Is Present, Verify Connector Seating And Functionality After Fitting.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 406
• Product Codes: 9101H2
• Other Numbers: EZR (Color Code)

Why The Part Fails Most Often

• Mechanical Wear: Repeated Use Causes Internal Levers And Pivot Points To Wear Or Break.
• Plastic Clip Failure: Mounting Clips And Internal Plastic Components Become Brittle And Snap.
• Corrosion: Moisture Ingress Leads To Corrosion Of Fasteners Or Linkage Components.
• Impact Or Forced Entry: External Damage From Accidents Or Vandalism Can Break The Handle.

Use the product code 9101H2 and color code EZR when searching or ordering to ensure you receive the correct left front door handle for Peugeot 406 models (commonly covering model years 1995–2004). This description focuses on practical replacement information for mechanics and DIYers to help evaluate fitment and installation effort.

This original-equipment style left front door handle is designed for Peugeot 406 drivers who need a durable, correctly painted replacement. Supplied in Sherwood Green finish, the handle restores exterior appearance while maintaining correct fit and operation of the door latch and linkage. Ideal for professional workshops and competent DIYers who want a direct-fit part identified by part numbers 9101H2 and 9621858877.

Key Benefits

• Direct Fit For Peugeot 406 Driver Side Front Door — reduces installation time and adjustments.
• Factory Color Match — Painted Sherwood Green to match original exterior finish.
• Robust Mechanical Operation — Designed To Operate The Latch And Linkage Smoothly Under Normal Use.
• Part Numbers Often Searched By Mechanics — Includes 9101H2 and 9621858877 for fast identification.

Recommended Use And Fitment

Intended specifically for the left (driver) front door of Peugeot 406 models. Check the part numbers against your service documentation or the part being replaced to confirm compatibility. This handle replaces worn, broken, or cosmetically damaged handles and is suitable for refinish where needed.

How The Part Works And Why It Fails

The door handle provides the mechanical interface between the occupant and the door latch: when pulled, it actuates internal linkages or cables that release the latch. Common failure modes include:

• Plastic Or Metal Tab Breakage — Frequent opening/closing and forceful use can fracture mounting tabs or internal levers.
• Corrosion And Seizing — Moisture ingress and road salt can corrode pivots or fasteners, causing stiffness or failure.
• Impact Damage — Parking lot knocks or collisions often crack or deform external handles.
• Paint Degradation — Environmental exposure can cause finish wear, reducing appearance though not function.

Replacement Procedure (Overview)

Replacement is straightforward for a trained technician or experienced DIYer. Typical steps:

• Remove Interior Door Trim Panel Carefully Using Trim Tools To Avoid Breaking Clips.
• Disconnect Linkage Rods Or Cables From The Existing Handle (Note Their Orientation For Reassembly).
• Unscrew The Retaining Fasteners And Remove The Old Handle From The Outside.
• Fit The New Handle, Secure Fasteners, And Reconnect Linkages Ensuring Smooth Operation.
• Reinstall Door Trim And Test The Handle Operation Several Times To Confirm Proper Latch Engagement.

Typical time: 30–60 minutes depending on experience and tools. Common tools: trim removal tools, Torx/Phillips drivers, pliers, and a flashlight.

Installation Recommendations

• Work On A Cool, Dry Day To Avoid Adhesive Or Paint Sensitivity Issues.
• Handle Mounting Points And Linkages Should Be Cleaned And Lightly Lubricated Where Appropriate.
• Replace Any Broken Clips Or Fasteners To Ensure A Secure Fit And Avoid Rattles.
• Test The Door Lock And Handle Operation After Installation From Both Inside And Outside.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 406 (Left Front / Driver’s Door)
• Product Codes: 9101H2, 9621858877
• Other Numbers: Not Specified

Why Choose This Part

If you need a correctly colored, OEM-style left front door handle for a Peugeot 406, this unit offers a cost-effective way to restore appearance and reliable mechanical function. Clear part numbers make it easy to locate and order the exact replacement used by many workshops and enthusiasts.

This used left front exterior door handle is designed for Peugeot 406 and is a direct-fit replacement for the driver’s door. Supplied with the factory paint code ETHC (Grey Metallic) and referenced under product code 9101H2, it is ideal for professional workshops and DIY mechanics who need a reliable, cosmetically matching part. Replacing a worn or damaged handle restores proper door operation and improves the vehicle’s appearance without repainting when the paint code matches.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 406
• Product Codes: 9101H2
• Additional Numbers: ETHC (Paint Code, Grey Metallic)
• Placement: Left Front / Driver’s Door

Features And Benefits

• Direct-fit replacement for easy installation without modification.
• Paint code ETHC for color-matched repairs on Grey Metallic vehicles.
• Cost-effective solution to restore door handling and appearance.
• Suitable for use by professional technicians and experienced DIYers.

Installation Recommendations

• Required tools: trim removal tools, Torx/Phillips screwdrivers, ratchet set, pliers.
• Procedure overview: remove door trim panel, detach window/lock rods from the handle linkage, unscrew the handle mounting hardware, remove the old handle and install the replacement, reconnect rods and test operation before refitting the trim.
• Check alignment of linkages and the latch mechanism; apply light grease to moving joints if dry.
• After installation, verify lock/unlock and door open/close from both inside and outside.
• If corrosion or damaged internal rods are found during replacement, replace affected components to ensure long-term reliability.

Why This Part Fails

Exterior door handles commonly fail due to plastic fatigue, repeated mechanical stress, broken or cracked mounting tabs, or damage from impacts. Corrosion of the inner mechanism and seized linkages caused by moisture and road salts can also prevent the handle from operating smoothly. In high-use vehicles, wear on the internal pawls and clips accelerates failure. Lifespan depends on usage and environment but failures are typical after many years of repeated operation.

Recommendation

Check the paint code (ETHC) to ensure a good color match. Inspect internal rods, clips and the latch when replacing the handle to avoid repeat removal. Keep the mechanism lubricated and protect from moisture ingress when possible. Order by product code 9101H2 for faster identification and dispatch.

Product Overview

This left front exterior door handle is a direct-fit replacement designed for Peugeot 406 vehicles. Supplied in KMP Blue Rhodes paint finish, the handle restores correct exterior appearance and reliable operation of the driver door. Ideal for professional workshops and DIY mechanics searching by part numbers (9101H2, 9621858877, KMPD), this unit helps you complete body repairs or panel replacement quickly while keeping paint match and fitment in mind.

Key Benefits

• Direct Fit For Peugeot 406 Driver Door — Designed To Match Factory Mounting Points.
• Color-Matched Finish (KMP Blue Rhodes) — Reduces Need For Additional Painting.
• Searchable By OEM Codes — 9101H2 And 9621858877 Make It Easy To Find The Correct Part.
• Suitable For Workshops And Skilled DIYers — Saves Time During Door Repairs.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 406
• Product Codes: 9101H2, 9621858877, KMPD
• Additional Numbers/Notes: Color Code KMP (Blue Rhodes Paint). Left Front Driver Door Application.

Installation Recommendations

Install With Care To Ensure Correct Operation:

• Remove Interior Door Trim And Any Moisture Barrier To Access The Handle Mounting Area.
• Unscrew Or Unbolt The Handle Fasteners From Inside The Door And Carefully Disconnect Linkage Rods And Plastic Clips.
• If The Lock Cylinder Is Integrated, Remove And Refit It According To The Lockset Procedure.
• Fit The New Handle, Reconnect Linkages And Clips, Then Reinstall Fasteners And Door Trim. Check Smooth Locking And Latching Operation Before Final Reassembly.
• Always Protect The Painted Surface During Installation And Adjust Fitment To Ensure Even Gaps.

Most Common Failure Reasons

• Mechanical Wear Of Internal Mechanism And Plastic Clips Leading To Loose Or Intermittent Operation.
• Impact Damage From Accidents Or Door Strikes Causing Breakage Or Deformation.
• Corrosion Around Mounting Points, Particularly In Older Vehicles, Which Affects Function And Fit.
• Paint Damage From Repeated Use Or Environmental Exposure; Color Mismatch May Occur If Repaired Without Matching Code KMP.

Notes

Use The Provided Product Codes When Searching Or Ordering To Ensure Correct Fitment For Peugeot 406. For replacement of locking components or integrated cylinders, follow manufacturer guidance and test lock and latch functions after installation.

Recommendation

Recommended For Professional Repair Shops And Experienced DIYers Looking For A Color-Matched, Direct-Fit Door Handle For The Left Front Driver Door On Peugeot 406. Check Part Numbers 9101H2 And 9621858877 To Confirm Compatibility With The Vehicle.