This exterior left front door handle is a direct-fit replacement designed for workshop use and DIY repairs on Citroën and Peugeot models. Painted in Vapor Grey (EVG), it retains the original appearance and mounting points, making it suitable for bodywork repairs, collision replacement or wear-related renewal. Frequently searched under product code 9101GF, the part is aimed at professional mechanics and experienced home mechanics who need a reliable visual and mechanical match for the listed models.

Key Features

• Direct replacement for left front exterior door handle on listed Citroën and Peugeot models.
• Factory-matching Vapor Grey (EVG) painted finish for minimal visible difference after installation.
• Made to fit original mounting points and linkages for straightforward installation.
• Suitable for collision repair and routine replacement when the original handle is damaged or worn.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo III, C4 II, C4 Picasso, Grand C4 Picasso, Jumpy III; Peugeot 207, 308, Partner III, Expert III
• Product Codes: 9101GF
• Additional Numbers: EVG (Vapor Grey)

Installation Recommendations

• Work With The Door In A Stable Position And Protect Interior Trim.
• Remove Interior Door Trim And Moisture Barrier To Access Handle Fasteners And Linkages.
• Carefully Unclip And Label Linkage Rods And Fasteners Before Removal To Ensure Correct Reassembly.
• If The Original Handle Contains A Lock Cylinder Or Electrical Components, Transfer Them To The New Handle As Required.
• Refit Fasteners To Original Torque And Check Smooth Operation Of The Latch And Central Locking After Assembly.
• If Alignment Issues Appear, Adjust Door Catch Or Hinge Settings To Prevent Premature Wear.

Why The Part Most Commonly Fails

• Mechanical Wear And Degraded Plastic Clips Or Springs From Years Of Use.
• Impact Damage Or Deformation From Collisions Or Forced Entry Attempts.
• Corrosion Of Internal Metal Components Or Accumulated Dirt And Moisture Affecting Movement.
• Freezing And Thermal Stress Can Make Plastic Components Brittle And Prone To Breaking.

Fitment Notes

Verify That You Need The Left Front Exterior Handle (Driver Side On Left-Hand Drive Vehicles). Depending On Vehicle Variant, The Lock Cylinder Or Additional Trim May Need To Be Transferred From The Old Handle.

Order Using The Product Code 9101GF To Improve Searchability And Ensure You Receive The Correct Color Variant (EVG – Vapor Grey).

Part description

Used door handle ETSC 9101GF intended for left front door. It is a body part suitable as a replacement in the event of a crack, squeezing of the mechanism or damage to the surface of the handle. Due to the original name Stellantis (Citroën/Peugeot), it is often searched directly by part number.

Colour: ETS – Cendre gray lacquer (as specified in the documents).

Technical information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: CITROEN BERLINGO III, C4 II, C4 PICASSO and GRAND PICASSO, JUMPY III; PEUGEOT 207, 308, PARTNER III, EXPERT III
• Other numbers: ETSC

Product codes

• Product codes: 9101GF

Installation recommendations

In general/typically, door handle replacement may vary depending on the specific model and design of the door (rails, lock, tie rod/cables). Below is a practical procedure for this type of part.

1) Before assembly

• Compare with the old part: orientation (front left), shape, fit, design and marking 9101GF.
• Check the condition of the used handle: cracks, play, smooth operation, undamaged grips and bearing surfaces.
• Check shade: ETS – Cendre grey (may vary due to paint age and wear).

2) Necessary tools and materials

• Set of screwdrivers / bits (according to the type of joints in the door)
• Plastic crowbar for removing upholstery (to avoid damage)
• Pliers for buckles/pins, or a small hook for handling tie rods
• Cleaning agent and cloth (for contact surfaces)

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and open the door for convenient access.
2. Disassemble the inner lining of the door (typically: covers, screws, then carefully pry out the clips).
3. Disconnect any connectors in the door if they interfere with handling (proceed carefully, do not pull on the cables).
4. Access the space to the outer handle (after removing the lining and any film/protection).
5. Release the handle attachment according to the door design (screws/detent) and prepare the position of the pull rods/cable guides.
6. Disconnect the tie rods/cables from the crank – note their routing and locking position.
7. Remove the original handle and clean the landing surface in the door.
8. Insert the new handle into the hole, seat it correctly in the guides and bearing surfaces.
9. Reattach the tie rods/cables and check that they are properly secured (no crossing or tension).
10. Tighten the handle attachment and verify that it is firmly seated without play.
11. Before completing the paneling, test the door opening function (from outside and inside).
12. Refit the protective film/insulation (if removed), connect the connectors and fit the door trim.
• 4) Post-assembly checks and test drive/function verification
  • Verify the smooth operation of the handle and correct return to the starting position.
  • Check that the door opens/closes without increased resistance and that nothing rubs.
  • After a short drive, check again for play or unwanted noises from the door area.

  5) The most common assembly mistakes + how to avoid them

  • Swap sides (right/left): always compare the shape and orientation with the old piece before assembly.
  • Incorrectly guided or unsecured drawbar/cable guide: note the position before disassembly and test function several times after assembly.
  • Damage to trim clips: use a plastic pry bar and work evenly around the perimeter.
  • Bad seat of the handle: clean the seating surfaces and seat the handle in the guides without violence.

  Reasons why the part is damaged

  • Mechanical wear due to frequent use (backlash, squeezing of the bearing).
  • Cracking of plastic parts due to the age of the material or frost.
  • Damage after an accident or during careless handling (e.g. prying open a frozen door).
  • Corrosion/fouling of the lock mechanism which increases resistance and stresses the handle.
  • Incorrect installation (tension of tie rods/cable guides, crooked seating) which leads to excessive stress.
  ]]> https://www.usedpartsvendor.com/body/door-handles/c4-ii-door-handles/door-handle-citroen-peugeot-gray-knn-9101gf/ Wed, 10 Dec 2025 03:03:57 +0000 https://www.usedpartsvendor.com/uncategorized/door-handle-citroen-peugeot-gray-knn-9101gf/ Left front door handle for CITROEN PARTNER III C4 PICASSO i GRAND PICASSO JUMPY III and PEUGEOT 207 308 PARTNER III EXPERT III cars
  Color KKN – ADEN RED PAINT

  The Citroën Peugeot door handle in gray design with the marking KNN 9101GF is intended for the left front door of selected Citroën and Peugeot models. It is a used original part from the PSA concern, suitable for professional car mechanics as well as for home repairs, where the emphasis is on accurate seating and reliable door function.

  This crank is suitable for cars that require a quality replacement of the original part, and is often searched for precisely by the product number 9101GF. Thanks to the correct shape, attachment and dimensions, it enables a full replacement of the original handle without the need to modify the bodywork.

  Technical information
  Manufacturer: PSA (Citroën / Peugeot)
  Model:
  – Citroën C4 Picasso
  – Citroën Grand C4 Picasso
  – Citroën Jumpy III
  – Citroën Berlingo III / Partner III (Citroën)
  – Peugeot 207
  – Peugeot 308
  – Peugeot Partner III
  – Peugeot Expert III

  Product codes:
  – 9101GF

  Other numbers:
  – KNN (designation of color design / part specification)

  Color / design:
  – Gray version of the door handle
  – Surface and color designed to harmonize with the original appearance of the car

  Part location:
  – Left front door

  Part Type:
  – External door handle for Citroën and Peugeot passenger cars and light commercial vehicles

  Installation recommendations
  – Before assembly, compare the shape and handles with the original handle from the car.
  – Dismantle the original handle carefully to avoid damaging the lock mechanism or the pulls inside the door.
  – Check the condition of the lock, pulls and plastic clips – worn or cracked parts should be replaced at the same time.
  – When assembling, seat the handle correctly in the hole in the body and tighten all the screws securely according to the access from the inside of the door.
  – Check the smooth operation of the handle from the outside and from the inside – the handle must return to the starting position and the door must open and close without stuttering.
  – After completing the assembly, perform a door tightness test (fit on the seal) and adjust the position of the door or lock if these parts have been tampered with.

  By using this original Citroën Peugeot KNN 9101GF door handle, you will get a functional and dimensionally accurate replacement for the damaged part, which will restore the comfortable and safe use of the door in your car.

  ]]> https://www.usedpartsvendor.com/body/door-handles/jumpy-iii-expert-iii-door-handles/citroen-peugeot-crank/ Wed, 18 Jun 2025 02:06:02 +0000 https://www.usedpartsvendor.com/uncategorized/citroen-peugeot-crank/ Left Front Door Handle – Driver’s Door For Vehicles Citroën Partner III, C4 Picasso And Grand Picasso, Jumpy III And Peugeot 207, 308, Partner III, Expert III. Color EXY – Black Onyx Paint. Various Colors Available In Stock.

  High-quality replacement left front exterior door handle designed for Citroën and Peugeot models. Built to OEM fit specifications, this black Onyx (EXY) handle offers a direct swap for mechanics and experienced DIYers seeking a durable, cosmetically matching solution. Frequently searched by product code 9101GF, this part restores reliable door operation and appearance after wear, breakage, or accidental damage.

  Technical Information

  • Manufacturer: Stellantis (Citroën/Peugeot OEM)
  • Model: Citroën Partner III, Citroën Berlingo III, Citroën C4 Picasso, Citroën Grand C4 Picasso, Citroën Jumpy III; Peugeot 207, Peugeot 308, Peugeot Partner III, Peugeot Expert III
  • Product Codes: 9101GF
  • Other Numbers: Color Code EXY – Black Onyx

  Features And Function

  This external left front door handle operates the door latch mechanism to open the driver side door. It is manufactured to match the original exterior profile and paint finish for a seamless repair. The handle is intended as a mechanical replacement; depending on vehicle variant, it mates with the factory rods, clips and locking mechanism.

  Compatibility And Fitment

  Designed specifically for the listed Citroën and Peugeot models. Fitment is model- and year-dependent; verify visual match with the existing handle (shape, mounting points and paint code EXY). The part is commonly referenced by code 9101GF when searching or ordering.

  Installation Recommendation

  Recommended For Experienced Mechanics Or Confident DIYers. Typical Replacement Steps:

  • Remove Interior Door Trim To Access Handle Mechanism (remove screws, clips and window controls as required).
  • Disconnect Linkage Rods And Any Electrical Connectors If Present.
  • Unscrew Retaining Fasteners From The Exterior Handle (usually Torx or Phillips screws and plastic retainers).
  • Fit New Handle, Reattach Linkage Rods And Fasteners, Replace Any Damaged Clips With New Ones.
  • Test Door Operation And Locking Function Before Reassembling Door Trim; Adjust Rod Position If Necessary.
  • Use Proper Trim Tools To Avoid Damaging Interior Panels. Replace Worn Seals Or Clips During Reassembly.

  Why The Part Most Commonly Fails

  Exterior door handles typically fail due to mechanical wear and plastic fatigue from repeated use, prolonged UV exposure, freeze/thaw cycles that make plastic brittle, or impact damage from accidents and forced entry. Broken or weakened retaining clips and bent linkage rods also cause handle malfunction even if the handle itself appears intact.

  Notes For Mechanics And DIYers

  When replacing the handle, inspect the door latch, linkage rods and retaining clips and renew them if worn. Lubricate pivot points and the latch with a suitable automotive lubricant to ensure smooth operation. For painted handles, confirm paint code EXY matches the vehicle or consider professional paint touch-up for a perfect color match. After installation, cycle the door several times and check central locking and child-lock functions where applicable.

  ]]> https://www.usedpartsvendor.com/body/door-handles/jumpy-iii-expert-iii-door-handles/citroen-peugeot-knyc-9101gf-door-handle/ Wed, 18 Jun 2025 02:06:02 +0000 https://www.usedpartsvendor.com/uncategorized/citroen-peugeot-knyc-9101gf-door-handle/ The Left Front Door Handle is designed for the driver’s door of Citroën Partner III, C4 Picasso, Grand Picasso, Jumpy III, and Peugeot 207, 308, Partner III, Expert III models.
  It features the attractive Blue Tivoli paint finish (KNY), combining both aesthetics and functionality.

  If you need a reliable replacement for a worn or damaged door handle, this used part guarantees compatibility and perfect fit with the specified models. It is an ideal solution for professional mechanics and DIY car enthusiasts seeking an affordable yet dependable component.

  Door handles are often subjected to regular wear due to frequent use, making replacement necessary to maintain vehicle appearance and door operation comfort. Installing this handle is straightforward and can be completed quickly, saving time during repairs.

  Technical Information:

  • Manufacturer: Citroën, Peugeot
  • Models: CITROËN PARTNER III, C4 PICASSO, GRAND PICASSO, JUMPY III; PEUGEOT 207, 308, PARTNER III, EXPERT III
  • Product Codes: 9101GF, KNYC

  Using a suitable replacement like this door handle can extend your vehicle’s lifespan and reduce repair expenses. Purchase with confidence knowing you get quality, reliability, and a stylish finish for your vehicle.

  ]]> https://www.usedpartsvendor.com/body/door-handles/jumpy-iii-expert-iii-door-handles/citroen-peugeot-grassmark-gray-ewpb-9101gf/ Thu, 24 Apr 2025 02:06:34 +0000 https://www.usedpartsvendor.com/uncategorized/citroen-peugeot-grassmark-gray-ewpb-9101gf/ This gray door handle is designed specifically for the left front doors of Citroën and Peugeot vehicles, including popular models such as Citroën Partner III, C4 Picasso, Grand Picasso, Jumpy III, and Peugeot 207, 308, Partner III, and Expert III. The precise color code EWPB matches the Banquise White paint, ensuring a perfect visual integration with your vehicle’s exterior.

  The door handle is a critical component subject to regular wear and tear due to frequent usage. Over time, handles may become loose, difficult to operate, or even break, leading to inconvenience or compromised vehicle security. Replacing the handle with an original-quality part like this ensures reliable door operation and maintains the aesthetic appeal of your vehicle.

  Installation is straightforward, suitable for professional mechanics as well as experienced DIY enthusiasts. It is important to follow manufacturer guidelines during replacement to guarantee proper fitment and secure attachment, which contributes to safety and durability.

  Technical Information

  • Manufacturer: PSA Citroën Peugeot
  • Compatible Models: Citroën Partner III, C4 Picasso, Grand Picasso, Jumpy III; Peugeot 207, 308, Partner III, Expert III
  • Product Codes: EWPB 9101GF
  • Additional Numbers: 9101GF

  Choose this door handle to ensure a durable, visually seamless replacement part for your Citroën or Peugeot. Enjoy restored door functionality and enhanced confidence every time you drive.

  ]]> https://www.usedpartsvendor.com/body/door-handles/jumpy-iii-expert-iii-door-handles/door-handle-citroen-peugeot-gray-kgnc-9101gf-2/ Tue, 31 Dec 2024 03:10:57 +0000 https://www.usedpartsvendor.com/uncategorized/door-handle-citroen-peugeot-gray-kgnc-9101gf-2/ Left Front Door Handle
  For CITROEN PARTNER III, C4 PICASSO, GRAND PICASSO, JUMPY III and PEUGEOT 207, 308, PARTNER III, EXPERT III vehicles.

  Looking for a reliable door handle for your Citroën or Peugeot? Our gray door handle, marked with code KGNC 9101GF, is the perfect solution for repairs and restoring the functionality of your vehicle. This part has been carefully selected to meet strict quality standards, ensuring long-term reliability.

  Installing this handle is straightforward and can be done by both home mechanics and professionals. We focus on providing parts that enhance sustainability and extend the lifespan of your car, all at competitive prices.

  Technical Information:
  Manufacturer: PSA – Citroën & Peugeot
  Model: CITROEN PARTNER III, C4 PICASSO, GRAND PICASSO, JUMPY III, PEUGEOT 207, 308, PARTNER III, EXPERT III
  Product Codes: KGNC 9101GF
  Other Numbers: Color KGN – LAK BOURRASQUE

  This part is highly compatible with a wide range of models, ensuring its extensive use. Its specific gray color matches the original appearance and contributes to enhancing the aesthetic value of your vehicle. Whether it’s replacing a damaged part or upgrading, this product is the ideal choice for achieving desired functionality and style.

  ]]> https://www.usedpartsvendor.com/body/door-handles/jumpy-iii-expert-iii-door-handles/door-handle-citroen-peugeot-kgzd-9101gf/ Thu, 17 Oct 2024 02:08:03 +0000 https://www.usedpartsvendor.com/uncategorized/door-handle-citroen-peugeot-kgzd-9101gf/ Driver Side Front Door Handle
  Color KGZ – BLUE INARI
  Slightly Scratched

  Are you looking for a reliable replacement for your Citroën or Peugeot door handle? Our driver side front door handle is the perfect choice for Citroën and Peugeot vehicle owners who demand quality and functionality at an affordable price. This part comes in the elegant and sophisticated blue Inari (KGZ) shade, adding a stylish touch to your vehicle. Despite minor surface scratches, the handle maintains full functionality and guarantees hassle-free use.

  Technical Information:
  Manufacturer: PSA Citroën Peugeot
  Model: 2008, 207, 308, BERLINGO III, PARTNER III, C4 PICASSO, JUMPY III, EXPERT III
  Product Codes: 9101GF KGZD
  Additional Numbers: Not Available
  Citroën and Peugeot are known for their demanding quality standards for auto parts, making it essential to choose replacement components that meet original specifications. This door handle meets these requirements and can be an ideal substitute for an original part that has reached the end of its lifespan.

  This product is suitable for repairing or replacing damaged or worn door handles. The installation process is straightforward and can be performed by an average mechanic or a suitably skilled DIYer. The exact replacement procedures may vary depending on the vehicle model, but generally, it is a relatively simple operation that does not require specialized tools beyond basic mechanical equipment.

  From a maintenance perspective, the door handle may seem like a trivial component, but its function is crucial for the comfort and safety of automobile travel. Frequent replacements may be caused by external mechanical damage or internal wear of the mechanism, which is common with regular vehicle use.

  You will appreciate this handle for its seamless integration into your vehicle’s system and the advantages it brings in both aesthetics and functionality. Remember, even a seemingly small part like a door handle can significantly impact the overall appearance and feel of your car.

  ]]> https://www.usedpartsvendor.com/body/door-handles/jumpy-iii-expert-iii-door-handles/door-handle-citroen-peugeot-black-kthb-9101gf/ Wed, 31 Jul 2024 04:09:03 +0000 https://www.usedpartsvendor.com/uncategorized/door-handle-citroen-peugeot-black-kthb-9101gf/ Left Front Door Handle – Driver’s Door
  Color KTH – GREY THORIUM PAINT

  Are you looking for a reliable auto part for the repair or maintenance of your Citroën or Peugeot? Our left front door handle for the driver’s side in an attractive grey color (KTH – GREY THORIUM PAINT) is the ideal choice for experienced mechanics as well as for those who enjoy fixing their own cars.

  This used part comes from the doors of Citroën and Peugeot vehicles and is known for its durability and long-lasting functionality. It is specifically designed for models such as Citroën Berlingo, C4 PICASSO, Peugeot 207, 308, and Partner from 2008 onwards. Its installation is relatively straightforward, which will be appreciated by anyone working in the field of auto repairs.

  Door handles are often subjected to regular use and may require replacement over time due to wear and tear or damage. Replacing this part not only improves the visual aspect of your car but also ensures the proper functionality of the doors, which is essential for safe and comfortable driving.

  Technical Information:

  • Manufacturer: PSA Citroën Peugeot
  • Model: Citroën Berlingo, C4 PICASSO, Peugeot 207, 308, Partner
  • Product Codes: 9101GF
  • Other Numbers: KTHB

  Whether you are restoring an older model or simply need to replace damaged parts, this door handle is a robust and reliable choice that can withstand the challenges of daily use. Enhance the functionality and safety of your Citroën or Peugeot vehicle with this quality part.

  ]]> https://www.usedpartsvendor.com/body/door-handles/jumpy-iii-expert-iii-door-handles/door-handle-citroen-peugeot-black-ktvd-9101gf-2/ Thu, 23 May 2024 04:06:29 +0000 https://www.usedpartsvendor.com/uncategorized/door-handle-citroen-peugeot-black-ktvd-9101gf-2/ Looking for a reliable replacement part for your Citroën or Peugeot vehicle? This black door handle is an ideal choice for owners who prefer to maintain or repair their cars themselves. Combining quality, performance, and aesthetics, it ensures your vehicle remains in top condition.

  This door handle fits several models from both Citroën and Peugeot, including Citroën Partner III, C4 Picasso, Grand Picasso, Jumpy III, and Peugeot 207, 308, Partner III, and Expert III. The handle features a sleek black metallic paint finish (KTV – Pearl Black Nera) that adds a stylish touch to your vehicle.

  Replacing the door handle is straightforward and quick, which helps save time and reduce operating costs associated with repairs. The part is made from high-quality materials, providing excellent resistance to wear and ensuring long-term durability even under daily use.

  Technical Information:

  • Manufacturer: OEM Citroën Peugeot
  • Compatible Models: Citroën Partner III, C4 Picasso, Grand Picasso, Jumpy III; Peugeot 207, 308, Partner III, Expert III
  • Product Codes: 9101GF
  • Additional Numbers: KTVD

  If you have any questions about specifications, compatibility, or installation, please do not hesitate to contact us. Our experts in Citroën and Peugeot parts are here to help you keep your car in excellent technical condition. Treat your vehicle to the best quality replacement parts for reliable performance and style.

  ]]>