Overview

This exterior door handle is designed for Citroën C4, Citroën C6 and Peugeot 407 models and carries the manufacturer/product identifiers used in searches: 9101ER and KKQD/KKQ. It provides a direct-fit replacement for worn or damaged handles, restoring proper door opening and locking function while matching the vehicle paint finish (KKQ Red Profond).

Key Benefits

• Direct Fit: Designed to match original mounting points and linkage for an easy replacement.
• Color Matched: Supplied in KKQ paint (Red Profond) to match factory finish and reduce the need for repainting.
• Durable Construction: Built to withstand repeated use and environmental exposure common to exterior fittings.
• Part Number Search Friendly: Commonly referenced by code 9101ER and KKQD, making it easy to locate for repairs.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4, Citroën C6, Peugeot 407
• Product Codes: 9101ER, KKQD
• Additional Numbers: Color KKQ – Paint Red Profond

Function

The external door handle provides the mechanical interface to unlatch the door from outside. It transfers motion via linkages or cables to the door latch mechanism and in some versions works together with the locking cylinder or electronic locking components to secure the door.

Installation Recommendations

• Prepare Tools: Remove inner door trim using appropriate trim tools to avoid damage to clips and panels.
• Disconnect Battery: For vehicles with electrical locking or sensors, disconnect the battery before starting to prevent short circuits.
• Access Latch Area: Peel back vapor barrier carefully to access handle fixings, linkage rods or cables, and any electrical connectors.
• Remove Fixings: Unscrew retaining bolts/screws and unclip linkage/cable from the old handle. Keep track of small clips and washers.
• Fit New Handle: Install the new handle, reconnect linkage and any electrical connectors, and secure all fasteners to the original torque where applicable.
• Function Check: Before reassembling the door trim, test opening/locking from outside and inside to ensure smooth operation and correct alignment.
• Reassembly: Refit vapor barrier and inner trim, ensuring all clips are engaged and seals are intact to prevent water ingress.

Most Common Reasons For Failure

• Mechanical Wear: Repeated use leads to wear of pivot points, plastic tabs or metal linkages, eventually causing play or breakage.
• Corrosion: Moisture ingress and salt exposure can corrode metal parts or seize moving joints, especially in older vehicles.
• Impact Damage: Door impacts or attempts to force the door open can crack or deform the handle housing.
• Broken Clips Or Linkages: Plastic retaining clips and connectors can become brittle over time and fail during normal operation or removal.
• Paint Damage: Fading or chipping of the painted surface (KKQ) from environmental exposure or abrasion.

Compatibility And Search Tips

This part is frequently searched by product codes 9101ER and KKQD/KKQ. Verify vehicle model and door side (right front, right rear, left rear) when ordering to ensure correct fit. It is intended as a direct replacement for the listed Citroën and Peugeot models and is ideal for professional technicians and DIY enthusiasts carrying out bodywork or latch repairs.

Premium replacement exterior door handle designed for direct fit on selected Citroën and Peugeot models. This unit matches the EZQ Manitoba Grey paint finish and is intended for the right front, right rear and left rear positions depending on vehicle application. It is aimed at professional mechanics and experienced DIYers who require a reliable, visually matched handle for body repairs or wear-related replacements. Product codes such as 9101ER and EZQC are commonly used when searching for this part.

Features And Benefits

– Direct-fit replacement for factory exterior door handle positions where specified.
– Factory color-matched finish (EZQ — Manitoba Grey) for a seamless appearance after installation.
– Suitable for repairs following wear, breakage or minor collision damage where the handle itself must be replaced.

Compatible Models

Citroën C4
Citroën C6
Peugeot 407

How To Replace

Replacement requires removing the interior door trim to access the handle linkage and fasteners. Typical steps:

• Carefully remove the door card and set aside any clips or fasteners.
• Disconnect the interior release rod/clips from the handle mechanism.
• Unscrew the retaining bolts or nuts that secure the exterior handle to the door shell.
• Withdraw the old handle and install the new handle, ensuring correct orientation and engagement of the lock/linkage rods.
• Tighten fasteners to secure the handle, reconnect linkage, test operation of locking and opening functions, then reassemble the door trim.

Follow manufacturer guidance for any model-specific steps and check for hidden clips or electrical connectors on models with integrated locking sensors.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4; Citroën C6; Peugeot 407
• Product Codes: 9101ER; EZQC
• Additional Numbers: Paint EZQ — Manitoba Grey

Installation Recommendations

Use correct trim tools to avoid damaging the door card and retainers. Inspect all linkage clips and replace any brittle or deformed plastic clips during installation. Lubricate moving pivots lightly with an appropriate grease to restore smooth operation. After fitting, verify central locking and mechanical release operate smoothly from both inside and outside. If the handle includes integrated electronic sensors (on some variants), ensure connectors are properly seated before reassembling the door panel. Always follow safe working practices and vehicle manufacturer instructions.

Most Common Failure Reasons

Exterior door handles commonly fail due to mechanical wear and plastic fatigue of internal levers and clips, repeated forceful operation, corrosion of metal retaining elements, or impact damage from minor collisions. Paint wear and chipping from frequent use or environmental exposure can also cause aesthetic degradation that prompts replacement.

This part is ideal when matching exterior finish and restoring reliable door operation on the listed Citroën and Peugeot models. Use the product codes 9101ER or EZQC when searching to improve chances of finding the correct fit for your repair.

This replacement exterior door handle is designed for direct fitment on selected Citroën and Peugeot models. Ideal for professional workshops and DIY mechanics, the part restores correct door operation and appearance after damage, wear or paint deterioration. Many customers search by product code (9101ER / KNND), so use these references to find the correct item quickly.

Features And Benefits

Durable exterior handle finished in Alcyon Blue (KNN). Precision-molded mounting points ensure stable fit and correct alignment with the door latch and linkage. Suitable for vehicles with mechanical and central locking systems; preserves original look and functionality when installed correctly.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C4, Citroën C6, Peugeot 407
• Product Codes: 9101ER, KNND
• Other Numbers: Color Code KNN (Alcyon Blue)

Installation Recommendations

Recommended for installation by qualified technicians or experienced DIY mechanics. Typical replacement procedure:

1. Remove the interior door trim panel to access the handle mounting and linkage. Take care with trim clips to avoid breakage.
2. Disconnect any electrical connectors if the handle integrates switches or a central locking actuator.
3. Unfasten the bolts or nuts securing the handle from inside the door and carefully release the latch linkage and retaining clips.
4. Fit the new handle, engage the linkage and secure mounting fasteners. Check that the handle operates the latch smoothly before reassembling the door card.
5. After reassembly, test opening and locking from both outside and inside the vehicle, and verify central locking operation if applicable.

Tip: Work in a clean, well-lit area and keep removed fasteners and clips organized. If the vehicle has electric door components, disconnect the battery before starting work to avoid accidental short circuits or damage to electrical systems.

Why This Part Most Commonly Fails

• Mechanical Wear: Repeated use causes internal latch levers and pivot points to wear or develop play.
• Impact Damage: Parking scratches or collisions can crack the handle or break mounting tabs.
• Corrosion: Moisture ingress and salt exposure corrode metal fixings or cause internal components to seize.
• Plastic Fatigue: UV exposure and temperature cycling can make plastic parts brittle and prone to fracture.
• Lock Cylinder Wear: In some cases the lock mechanism or connecting rods degrade, affecting handle operation.

Practical Notes

When replacing a painted handle, verify the color code (KNN) to ensure a close match to the vehicle paint. For best results, check alignment after installation and lubricate latch linkages with appropriate grease to extend service life. Using genuine or OEM-equivalent parts helps maintain proper fit and finish.

Suitable For

Professionals and competent DIYers working on Citroën C4, Citroën C6 and Peugeot 407 who need a direct-fit exterior door handle in Alcyon Blue (KNN). Search by product codes 9101ER or KNND for quick identification.

Product Overview

This replacement exterior door handle (code 9101ER) is designed for direct fit on Citroën C4, Citroën C6 and Peugeot 407 vehicles. Finished in paint code EZWD (gray metallic), it restores appearance and function after damage or wear. The part suits professional workshops and experienced DIYers who want an OEM‑style match for body color and reliable mechanical operation.

Key Benefits

• Direct Fit Replacement: Engineered to match factory mounting points and linkages for straightforward installation.
• Color Matched: Painted to EZWD gray metallic to blend with original exterior finish and reduce repainting work.
• Durable Construction: Designed to withstand regular use and environmental exposure when installed correctly.
• Ideal For Mechanics And DIYers: Clear fitment to common Citroën/Peugeot models reduces diagnosis time and returns the vehicle to service quickly.

Function And Application

The exterior door handle provides the mechanical interface to operate the door latch, transferring user input through rods or cables to the latch mechanism. Depending on vehicle specification, the handle may house the lock cylinder or interface with remote/central locking linkages. It is a cosmetic and functional component that must align precisely with the door latch and internal linkages for reliable opening and secure closure.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4, Citroën C6, Peugeot 407
• Product Codes: 9101ER
• Other Numbers: EZWD (Paint Code: Gray Metallic)

Installation Recommendation

Recommended for fitment by a trained mechanic or experienced DIYer. Typical installation steps:

• Remove the inner door trim panel to access the handle mounting area and linkages.
• Disconnect any rods, cables or electrical connectors linked to the handle (note how each linkage is routed).
• Unscrew or unclip the old handle from the door shell; transfer the lock cylinder or gaskets if required by the vehicle.
• Fit the new handle, secure fasteners to factory torque where specified, reconnect linkages and check free movement.
• Test door operation, central locking function (if applicable) and alignment before refitting the door panel.

Use corrosion‑resistant fasteners where possible and ensure paint edges are protected during installation. Follow door panel removal procedures in the vehicle repair manual to avoid breaking clips.

Most Common Cause Of Failure

Exterior door handles most often fail from mechanical wear, plastic fatigue or breakage of internal levers and mounting clips—especially on high‑use doors. Impact damage (parking knocks or attempted break‑ins), corrosion of mounting points or seized linkages can also render the handle inoperative. Paint damage is typically cosmetic but can indicate prior impacts that may have stressed the mounting area.

Practical Tips Before Purchase

• Confirm the required handle side (right front, right rear, left rear) and paint code EZWD to ensure the best visual match.
• If the old handle contains a lock cylinder or specific clips, be prepared to transfer those components or order them separately if needed.
• Keep a small supply of replacement clips and fasteners; broken interior clips are a common issue during door trim removal.

Warranty And Quality

Offers like this typically represent a direct replacement part intended to restore original function and appearance. For long‑term performance, ensure proper fitting and avoid forcing misaligned linkages.

Door Handle Suitable For Citroën And Peugeot Models. This exterior door handle is designed as a direct-fit replacement for the right front, right rear and left rear doors on Citroën C4, Citroën C6 and Peugeot 407 models. Finished in KTV Black Pearl Nera paint, it restores the original appearance while maintaining factory mounting points and linkage geometry. Ideal for professional garages and DIY mechanics looking for a high-quality body replacement part identified commonly by product code 9101ER.

Key Benefits

– Direct Fit For Vehicle Models Listed, No Modifications Required
– Factory-Style Finish In Black Pearl Nera (KTV) To Match Exterior Trim
– Simple Replacement Procedure Designed For Standard Garage Tools
– Commonly Searched By Code 9101ER, Improving Findability In Catalogs And Search Engines

Technical Information

• Manufacturer: Stellantis (Citroén, Peugeot)
• Model: Citroën C4; Citroën C6; Peugeot 407
• Product Codes: 9101ER, KTV
• Other Numbers: No additional OEM numbers provided

Function And Application

The Door Handle Operates The Exterior Latch Mechanism, Providing Manual Access To The Cabin. It Transfers Motion Via Internal Rods Or Cables To The Door Latch And Houses The External Grasping Surface And Mounting Tabs. This part Replaces Damaged Or Worn Handles That Affect Door Operation, Weather Sealing, Or Exterior Appearance.

Replacement Procedure (Summary)

• Remove Interior Door Trim Panel To Access Handle Fasteners And Linkages.
• Disconnect Linkage Rods Or Cables From The Handle; Note Clip Orientation For Reassembly.
• Unscrew Mounting Bolts/Nuts Securing The Exterior Handle From Inside The Door.
• Remove Old Handle, Transfer Any Required Trim Pieces Or Gaskets, And Fit The New Handle Into Position.
• Reconnect Linkages, Secure Fasteners, Refit Door Trim And Test Door Operation Several Times To Confirm Smooth Latching And Locking.

Installation Recommendations

– Use Proper Trim Tools To Avoid Damaging Door Panels And Clips.
– Replace Any Broken Plastic Retainers Or Corroded Fasteners During Installation.
– Lubricate Linkage Clips And Locking Points With Suitable Grease To Prevent Squeaks And Reduce Wear.
– Verify Alignment And Smooth Operation Before Final Assembly.

Most Common Failure Causes

Exterior Door Handles Often Fail Due To Mechanical Wear, Impact Damage, Or Degraded Plastic Components. Common Issues Include Broken Retaining Tabs, Worn Pivot Points, Corroded Fasteners, And Snapped Linkage Clips. In Regions With Harsh Weather, Corrosion Or Freeze-Related Damage Can Accelerate Failure. Cosmetic Damage Such As Paint Chipping Or Fading Also Drives Replacement.

Durability And Maintenance

With Normal Use, A Door Handle Typically Lasts Many Years But Lifetime Depends On Usage Frequency, Environmental Exposure, And Occasional Impacts. Regular Inspection Of Mounting Hardware And Linkages During Routine Service Can Prevent Sudden Failures. Touch-Up Paint For Minor Scratches Helps Preserve Appearance.

Add This Door Handle To Your Parts List If You Need A Reliable, Direct-Fit Replacement For Citroën C4, Citroën C6 Or Peugeot 407 Doors. Search Keywords: Door Handle, 9101ER, KTV, Citroën C4 Door Handle, Peugeot 407 Door Handle, Black Pearl.

High-quality exterior door handle designed for the right front, right rear and left rear doors of Citroën C4, Citroën C6 and Peugeot 407. This unit offers an OEM-fit replacement with a factory-style EZRC gray aluminium finish that preserves the vehicle’s original appearance. Ideal for professional mechanics and experienced DIY enthusiasts, the handle is commonly searched by product code 9101ER and engineered to match original mounting points and linkage interfaces for straightforward installation.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4, Citroën C6, Peugeot 407
• Product Codes: 9101ER
• Additional Numbers: Color Code EZRC (Gray Aluminium)

Function And Application

The exterior door handle transfers user input to the internal latch and locking mechanism. It Provides Mechanical Leverage To Release The Door Latch When Pulled And Houses Mounting Points For Linkages And Retaining Clips. This Handle Is Suitable For Passenger Doors Specified Above And Replaces Worn, Damaged Or Cosmetic-Damaged Original Units.

Installation And Recommendations

Installation Should Be Performed By A Trained Mechanic Or A Competent DIYer With Basic Door Trim Experience. Typical Steps:

• Remove Inner Door Trim Panel Carefully To Access The Handle Fasteners And Linkages.
• Disconnect Linkage Rods And Any Electrical Connectors (If Present) While Noting Their Orientation.
• Unscrew The Mounting Bolts/Screws And Remove The Old Handle, Taking Care Not To Damage Door Paint Or Lock Cylinder.
• Fit The New Handle Into Place, Reattach Linkage Rods And Fasten Mounting Hardware To Specified Torque.
• Test The Handle Operation And Door Lock Function Several Times Before Reassembling The Door Trim.

Additional Recommendations:

• Protect Paint Around The Mounting Area During Work To Avoid Scratches.
• Replace Any Broken Clips Or Fasteners To Ensure Secure Fitment.
• Lightly Lubricate Moving Linkage Points With Dry Lubricant Or Silicone Spray To Improve Long-Term Operation.
• Allow Approximately 30–60 Minutes Per Door For Replacement In A Typical Workshop Setting.

Common Failure Causes

Exterior Door Handles Typically Fail Due To Mechanical Wear Of Plastic Tabs And Pivot Points, Impact Damage From Accidents Or Forced Entry, Corrosion Of Internal Metal Parts, Or Degraded Finish From Environmental Exposure. Repeated Heavy Use Can Cause Linkage Separation Or Broken Mounting Clips, Leading To Loose Or Non-Functional Handles. Cosmetic Damage Such As Paint Peeling Or Scratches Is Also Common Over Time.

Compatibility And Notes

This Handle Is Identified By The Product Code 9101ER And The EZRC Gray Aluminium Finish. Compatibility Is Primarily With The Listed Citroën C4, Citroën C6 And Peugeot 407 Models; Buyers Often Search By The Product Code 9101ER To Find The Correct Replacement Part. Ensure Correct Side And Door Position When Ordering (Right Front / Right Rear / Left Rear).

This door handle is manufactured with precision to meet the high standards required by Citroën and Peugeot vehicles. It features a sleek design in EYP Grey Fulminator / Oruro finish, which not only complements the vehicle’s look but also resists wear and tear over time.

Over time, door handles may experience wear due to frequent use or exposure to harsh weather conditions, leading to the need for replacement. Regularly inspecting and replacing worn-out door handles can prevent further damage to the vehicle’s locking mechanism and enhance security.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: C4, C6, 407
• Product Codes: 9101ER
• Other Numbers: EYPC