High-quality exterior left rear door handle designed for Citroën C1 and Peugeot 107 owners and professional technicians. This replacement part is paint-matched in KTA Carlinite Grey and is commonly searched under part code 9101AQ. Ideal for garage repairs, bodyshop refits and DIY maintenance—restores proper door operation and factory appearance.

Key Features

• Direct-fit replacement for Left Rear Door (Driver/Nearside Rear) on Citroën C1 and Peugeot 107.
• Painted Finish: KTA — Carlinite Grey, ready to install without additional painting in most cases.
• OEM-compatible fitment to maintain correct clearance and latch interaction.
• Designed for mechanics and experienced DIYers looking for a reliable, like-for-like spare.

Technical Information

• Manufacturer: Citroën / Peugeot (Stellantis)
• Model: Citroën C1, Peugeot 107 (First Generation, approx. 2005–2014)
• Product Codes: 9101AQ
• Additional Numbers: Color Code KTA — Carlinite Grey

Installation

Replacement requires removal of the interior door panel to access the handle mounting points and linkage. Typical procedure:

1. Remove the plastic trim and screws securing the inner door card. Carefully unclip the door card to avoid breaking retaining clips.
2. Peel back the vapour barrier to expose the inner door cavity and handle mounting screws/bolts.
3. Disconnect the mechanical linkage (rods) and any retaining clips from the old handle. Note the orientation of the rods for correct reassembly.
4. Unscrew and remove the old handle, then fit the new handle in position, securing all fasteners to the original torque where specified by the manufacturer.
5. Reconnect linkage, check smooth operation of latch and lock, reattach vapour barrier and reinstall the door card.
6. Verify door opens/closes and locks correctly before finishing.

Installation Recommendations

• Use suitable trim tools to avoid damaging door card clips and upholstery.
• Inspect the linkage and clips when removing the old handle; replace any worn or broken clips to ensure long-term reliability.
• Lubricate pivot points lightly with a suitable grease to prevent binding and squeaks.
• Work in a dry, well-lit area and keep small fasteners and clips organized during disassembly.

Common Reasons For Failure

• Plastic Fatigue: External handles and internal pivot components are often plastic and can crack or wear with repeated use, especially on older vehicles.
• Impact Damage: Minor collisions or door strikes can distort mounting tabs or break the handle body.
• Corrosion And Seizing: Moisture ingress can corrode metal linkages and fasteners, causing stiff or non-functioning operation.
• Broken Clips Or Linkage: Retaining clips and rods can detach or bend, disrupting the connection between handle and latch.

This replacement handle is an efficient way to restore door functionality and appearance for Citroën C1 and Peugeot 107 owners. Search by part code 9101AQ for fastest identification and ordering.

This left rear exterior door handle is an OEM-fit replacement designed for Citroën C1 and Peugeot 107 models. Painted in Lipizan White (KWD), it restores original appearance after damage or wear and ensures correct alignment and smooth operation with the factory latch and locking linkage. Ideal for professional workshops and DIY mechanics who need a direct-fit part that is easy to install and matches the vehicle finish.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 9101AQ
• Other Numbers: KWD (Paint Code), Lipizan White

How It Works

The exterior door handle transmits driver input to the internal latch assembly via a mechanical rod or cable and associated clips. When pulled, the handle moves the linkage to release the latch, allowing the door to open. Proper fit and alignment are essential to avoid excessive wear on clips or binding of the mechanism.

Installation Recommendations

• Prepare Tools: Panel trim tools, screwdriver set, pliers and a flashlight. Keep replacement clips ready in case originals break.
• Removal Steps: Remove the interior door trim panel to access the handle mounting points and linkage. Disconnect any electrical connectors for central locking if present. Unfasten the retaining screws/bolts and carefully detach the linkage from the handle (note clip orientation).
• Fitment: Position the new handle, secure the fasteners and reconnect the linkage. Ensure clips are fully engaged and the handle operates smoothly before reassembling the door trim.
• Final Check: Test door opening and locking functions several times and check for proper paint alignment and gaps.
• Safety: Work with the ignition off and the key removed. Support the door panel to avoid damaging trim clips during removal and reinstallation.

How To Replace (Step‑by‑Step)

1. Open the door and remove the trim panel using trim removal tools to avoid damage.
2. Locate and disconnect the handle linkage and any central locking connector.
3. Remove mounting fasteners securing the exterior handle to the door shell.
4. Extract the old handle, fit the new handle into position and secure with fasteners.
5. Reattach the linkage and connectors, ensuring clips are correctly seated.
6. Refit the door trim panel and perform functional checks of latch and lock.

Why This Part Most Often Fails

Exterior door handles commonly fail due to mechanical wear and fatigue of internal plastic components and mounting tabs, impact damage (parking accidents or slamming), and corrosion or seizing of metal linkage in older vehicles. Small plastic clips that secure the linkage are frequent weak points and are often the first items to break, causing the handle to actuate without opening the door.

Notes

This handle is frequently searched by part number 9101AQ and by color code KWD (Lipizan White). Suitable for both professional technicians and experienced DIYers looking for an exact-fit, painted replacement.

Order now to restore function and appearance to the left rear door of your Citroën C1 or Peugeot 107.

The outer door handle of the left rear doors for the Citroën C1 and the Peugeot 107 in the original Blue Electra (blue metallic). Thanks to the same color with the ELX varnish code, it is not necessary to paint the paint, which saves time and costs. It is the original part of the dog with precise attachment and geometry for 5 -door versions – ideal replacement for rupture, breaking of pin or paint damage.

The handle (outer door handle) ensures mechanical opening of the door through the lock. In these models, plastic fatigue, frost cracks or wear of hinge/spring are a common problem. The original handle returns the original function and appearance and maintains the exact operation of the lock and the seal around the handles.

Installation is usually straightforward: after removing the internal upholstery of the rear door, disconnect the pull from the handle, release a pair of screws (often torx) from the inside of the door, remove the old handle and put on this one. Then connect the pull again, check the lock and the door to the door and set the tapec back. It is recommended to compare the shape and position of the handles before assembly and verify the conformity of the Part and Color code.

technical information

• Manufacturer: PSA (Citroën / Peugeot)
• Model: Citroën C1 (I, 5D, approx. 2005–2014), Peugeot 107 (I, 5D, about 2005–2014); Location: left rear door, outer handle
• Product codes: 9101AQ; 9101 AQ; 9101.aq
• Other numbers: ELX paint code – blue Electra (blue metallic)

Suitable for all who are looking for an accurate replacement according to Part 9101AQ code and require preservation of the original appearance of the car. If you have the same lacquer on the car (EXL/ELX – blue Electra), you will save your painting work and achieve invisible repairs. Search keywords: rear door handle, outer handle, left rear, Citroën C1, Peugeot 107, 9101Aq, EXL, ELX, Blue Electra.

external door handle for the Citroën C1 and Peugeot 107 in color light blue metallic. Original part of the dog suitable for 5 -door design (location: rear left door – driver side of cars with steering wheel left). Ideal solution when rupture of the holder, breaking the pin or damage to the paint. Thanks to the same shade you save time and painting costs.

The handle is used for mechanical control of the lock through the rod inside the door. In these city cars, plastic handles over time can get tired and burst, especially in frequent use or frost. The replacement is usually simple: after removing the internal upholstery of the door, the drain is pulled out, the fastening screws (Torx) are released and the handle is removed from the outside. Installation does not require coding or intervention in electronics.

For the right compatibility, we recommend comparing the OE code and shape of the handles according to photos with your original handle. This piece is colored (light blue metallic), but the shade may vary according to the age of the paint – if necessary can be painted. Designed for cars with a pair of rear doors; does not fit on 3 -door variants.

technical information
Manufacturer: PSA (Citroën/Peugeot) – Original part
model: Citroën C1 (2005–2014) 5D; Peugeot 107 (2005–2014) 5D

Product codes: 9101Aq
additional numbers: 9101 AQ; 9101.aq

Status: Used original part of disassembly, fully functional. Can carry small operating tracks and hair abrasions in the paint corresponding to the age of the part.

Description

Used left rear exterior door handle suitable for Citroën C1 and Peugeot 107. This unit is offered with paint code KBL (Citrus Yellow) and corresponds to part code 9101AQ. Ideal for mechanics and DIY enthusiasts searching by product number (9101AQ) or by model name. The handle restores correct door opening function and maintains the exterior appearance when replacing a faded, damaged or broken original handle.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 9101AQ
• Additional Numbers: KBL (Paint Code) – Citrus Yellow

Fitment And Function

This exterior left rear door handle replaces the factory unit and connects to the door latch mechanism via standard linkages and retaining clips. It performs the mechanical function of actuating the latch to open the rear left door from the outside. Fitment is specific to the Citroën C1 and Peugeot 107 body style and paint code KBL for matching exterior color.

Installation Recommendations

Recommended For Professionals And Experienced DIYers. Typical replacement steps:

• Disconnect negative battery terminal before starting work to avoid electrical issues with door modules and switches.
• Remove inner door trim panel carefully (release clips and screws) to access the handle spindle and linkage.
• Disconnect the exterior handle linkage and any locking cylinder rods or clips.
• Unscrew or unclip the handle fastening points from inside the door shell and remove the old handle.
• Fit the replacement handle, secure fasteners, reconnect linkages and check movement for smooth operation before reinstalling the door card.
• Check lock operation and door latch function after reassembly. Make final adjustments to linkage if necessary.

Use proper trim tools to avoid damaging door panels. If the door has central locking, verify electrical lock/unlock operation after reassembly.

Why The Part Fails

Common reasons for door handle failure:

• Mechanical Wear: Pivot points and plastic bushings can wear over time, causing looseness or breakage.
• Impact Damage: Parking lot knocks or attempts to force the door can crack the handle or deform mounting tabs.
• Corrosion And Environmental Exposure: Salt, moisture and temperature cycles can accelerate deterioration, especially on mounting hardware and clips.
• Lock Cylinder Issues Or Forcing Attempts: Forced entry or vandalism can damage the handle assembly or associated linkages.

Failure typically appears as a loose or non-functional handle, inability to open the door from the outside, or visible cracks/scratches in the painted surface.

Practical Tips

• Match paint code KBL when replacing a painted exterior handle to maintain a factory appearance.
• Inspect linkages, clips and the door latch when replacing the handle; replacing worn clips at the same time prevents repeat failures.
• Keep fasteners and clips organized during disassembly to ensure correct reinstallation.

Are you looking for a reliable way to repair or replace a damaged handle on the left rear door of your Citroën C1 or Peugeot 107? This part is the perfect choice for you, whether you are a mechanic or an experienced DIY enthusiast handling your own repairs. We offer a quality used left rear door handle suitable for Citroën C1 and Peugeot 107 models, fully compatible and ready for easy installation.

The left rear door handle is not only functional but also aesthetically pleasing with its original red color that perfectly matches your vehicle, giving your car a factory-original look without the need for additional painting. It is an ideal solution for those looking for a quick and efficient repair without compromising on quality or appearance.

Technical Information:
Manufacturer: PSA Citroen Peugeot
Model: Citroën C1, Peugeot 107
Product Codes: 9101AQ
Other Numbers: This part is specific to the above models and corresponds to the original code 9101AQ.

Our products are carefully inspected to meet high-quality standards. Shop with confidence from our selection of quality used auto parts that ensure satisfaction in your daily vehicle use. This door handle is a popular replacement for commonly worn-out parts, ensuring that you won’t have to frequently purchase new ones. The actual replacement is intuitive and can be easily completed in just a few minutes.

By ordering the left rear door handle for Citroën C1 or Peugeot 107, you not only save on the costs of buying new parts but also support sustainability by giving a second chance to used parts. Shop with us and gain quality, reliability, and sustainability in one.