This door limiter and hinge assembly is an original-fit component for the right front (passenger) door of the Peugeot 207. It secures the door in set open positions, prevents over-travel and reduces stress on the door hinges and body pillar. Ideally suited for professional workshops and competent DIYers who search by part number (9035T4) to ensure correct replacement. Constructed to match the factory mounting points and paint finish (EXL – Obsidian Black) for a precise visual and functional fit.

Features & Benefits

Provides reliable door stopping and controlled opening action to avoid damage to paintwork and bodywork. Direct-fit design simplifies replacement and restores OEM behavior. Compatible finish reduces the need for additional painting when replacing the visible hinge limiter on vehicles finished in Obsidian Black (EXL).

When To Replace

Replace the door limiter if you notice loose or sloppy door movement, the door does not hold in open positions, abnormal noises (clunking or grinding) when opening/closing, visible wear or deformation of the limiter arm, or corrosion that compromises structural integrity. Replacement is recommended after accident damage to the door or A-pillar area, or when wear starts to affect safe door operation.

Replacement Procedure (Overview)

• Prepare: Park on level ground, secure the vehicle, and have appropriate tools ready (torx/sockets, trim tools, torque wrench).
• Support Door: Open the door and support it to prevent sagging—use a padded prop or a second person if necessary.
• Remove Fasteners: Unscrew the mounting bolts that attach the limiter to the body and the inner door. Typical assemblies use two or three bolts on each side.
• Replace Assembly: Install the new limiter in the same orientation, hand-start bolts, then tighten to the manufacturer’s torque specification where available. Check alignment so the door closes and latches correctly.
• Test Operation: Operate the door through its full range, verify the limiter holds in detented positions and there is no binding. Re-check fasteners after a short test drive.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 207
• Product Codes: 9035T4
• Additional Numbers: EXL (Obsidian Black Paint)

Recommendation For Installation

Perform installation in a clean, well-lit workspace. Support the door to avoid strain on hinges and latch mechanisms during replacement. Use appropriate torque values for fasteners where available and ensure bolts are tightened evenly. Lubricate pivot points with a suitable grease after installation to prolong service life. If the door alignment changed after replacement, check hinge bolts and striker position and adjust as needed.

Why This Part Fails Most Often

Common causes of failure include metal fatigue from repeated opening/closing cycles, corrosion from road salt and moisture that weakens the housing or bolts, impact damage from accidents or door strikes, and wear of internal detent mechanisms. Lack of lubrication and heavy loads (holding the door open against strong wind) accelerate wear.

Particularly useful for mechanics and experienced DIYers searching by part number 9035T4; ensures fast identification and correct fit for Peugeot 207 right front passenger doors.

Overview

High-quality OEM door limiter / hinge assembly for the front right (passenger) door of the Peugeot 207. This used part was removed from a vehicle with 42,000 km and retains the original EWP factory paint (White Banquise). The component is ideal for mechanics and DIY enthusiasts looking for a direct-fit replacement that restores correct door positioning, prevents over-opening, and reduces rattles.

Why Choose This Part

Direct-fit unit with original manufacturer codes increases the chance of perfect compatibility and straightforward installation. Common search terms: Peugeot 207 door check, front right door limiter, door hinge 26308980, 14788980, 9035T4. Suitable for repairs after wear, minor impacts, or when the door does not hold in defined opening positions.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 207 (Front Right / Passenger Door)
• Product Codes: 26308980, 14788980, 9035T4
• Additional Numbers: EWP (Color Code: White Banquise), Removed At 42,000 Km

Function And Symptoms

The door limiter controls the door opening range and holds the door in defined positions to prevent uncontrolled swinging. Common symptoms of a failing limiter/hinge include the door not holding open, excessive play or clunking noises when opening/closing, uneven door alignment, or paint damage around the hinge area.

Most Common Failure Reasons

• Corrosion And Rust: Moisture and road salt accelerate wear on pivot points and fastening hardware.
• Mechanical Wear: Repeated cycles over years cause metal fatigue, worn bushes, or loosened bolts.
• Minor Collisions Or Door Impacts: Side impacts or heavy slams can bend or deform the limiter or its mounts.
• Poor Lubrication: Lack of maintenance can lead to stiff movement and accelerated wear.

Installation Recommendation

• Support The Door: Always support the door with a stand or helper before removing the limiter to avoid stress on hinges and wiring.
• Remove Interior Trim If Needed: Some vehicles require partial removal of the door trim to access mounting bolts and wiring grommets.
• Unbolt And Replace: Unfasten the limiter mounting bolts at the door and body pillar, remove the old unit and install the replacement in the same orientation.
• Tighten To Spec: Tighten fasteners to the Manufacturer’S Specified Torque Where Available. If Torque Values Are Unknown, Ensure Secure, Even Seating Of Bolts Without Overloading Threads.
• Lubricate Moving Points: Apply a suitable corrosion-inhibiting grease to pivot points after installation to extend service life.
• Check Door Operation: Verify smooth opening/closing, proper detents, and correct door alignment after installation. Adjust as required.

Compatibility Notes

Fits Peugeot 207 front right (passenger) door applications listed under the provided product codes. Buyers often search by OE numbers 26308980 / 14788980 / 9035T4 — use these codes to confirm fitment for your vehicle.

Practical Tips For Mechanics And DIY

• Work With The Door Lightly Weighted: Reducing load on the hinges during the swap prevents secondary alignment issues.
• Inspect Surrounding Components: Check door hinges, mounting points, and striker for wear or damage and replace as needed.
• Paint Touch-Up: Because this part is painted (EWP White Banquise), take care when removing old paint flakes and protect exposed metal to prevent corrosion.

If you are a mechanic or enjoy repairing your car yourself, this genuine Peugeot door stop hinge is an excellent choice for replacing the original worn or damaged part. It prevents the door from opening too far, protecting both the vehicle bodywork and the door itself from impact damage.

Although door stop hinges are durable components, exposure to extreme conditions or frequent use may cause wear or damage over time. Replacing this component is crucial maintenance to ensure your Peugeot 207’s doors function smoothly and safely every day.

Technical Information:

Manufacturer: PSA Citroen Peugeot
Model: Peugeot 207
Product Codes: 26308980, 14788980, 9035T4
Additional Numbers: Stop Hinge Right Front Door

Our used auto parts for Citroen and Peugeot vehicles provide a cost-effective alternative to new components and are perfect for mechanics and DIY enthusiasts aiming to keep their vehicles in optimal condition without investing in expensive replacements. Each item is carefully inspected to ensure full functionality.

Take advantage of our extensive range of auto parts and manage your vehicle maintenance confidently, knowing you have selected quality components that guarantee a safe and reliable operation of your Peugeot 207.