Durable Seat Belt Buckle Mount Designed For Professional Garages And DIY Enthusiasts. This replacement seat belt mount fits the Driver Side of Peugeot 308 T7 models and is commonly searched under the code 8975K9. The part secures the seat belt lock/buckle assembly to the vehicle structure, ensuring correct operation of the restraint system. Ideal For Mechanics And Hobbyists Who Need A Direct-Fit Component To Restore Safe Operation After Wear, Corrosion Or Accident Damage.

Features And Function

The mount Provides A Solid Anchor Point For The Seat Belt Buckle/Locking Mechanism. Its Primary Functions Are To Hold The Buckle In The Correct Position For Easy Use, Transmit Loads To The Vehicle Body During A Crash, And Maintain The Correct Geometry Of The Belt System. Depending On The Specific Vehicle Equipment, The Assembly May Include A Buckle Switch For Occupant Detection.

Replacement And Fitment

Replacement Typically Involves Removing Interior Trim Panels Around The Seat, Unbolting The Old Mount From The Seat Frame Or Body Anchor, Disconnecting Any Electrical Connector (If Buckle Switch Is Present), And Installing The New Unit Using The Correct Fasteners. After Fitting, Confirm The Buckle Latches And Releases Smoothly And That Any Seat Belt Indicator On The Dash Resets Correctly.

Installation Recommendations

• Disconnect The Battery Before Removal To Reduce The Risk Of Unwanted Airbag Or Electronic Signals And Wait A Few Minutes For Systems To Power Down.
• Keep Bolts And Fixings Clean; Replace Damaged Or Stretched Fasteners With New Items To Maintain Crash Integrity.
• Observe Manufacturer Torque Settings For Mounting Bolts; If Unsure, Use A Torque Wrench And Refer To Factory Manuals.
• Handle Any Buckle Switch Connector Carefully; Ensure Secure Seat-Back And Trim Reassembly To Avoid Noise Or Interference.
• After Installation, Perform A Functional Check: Latch/Release Operation, Seat Belt Warning Light Behavior, And Visual Inspection For Correct Alignment.

Why The Part Fails Most Often

Common Causes Of Failure Include Corrosion Of The Mounting Points, Physical Damage From Collisions, Wear And Contamination Of The Buckle Mechanism, And Plastic Fatigue In Clips Or Guides. Electrical Faults Can Occur In Buckle Switches Due To Moisture Or Connector Corrosion. Replacement Is Usually Required After A Crash Or When The Buckle Fails To Latch, Releases Unintentionally, Or Triggers A Seat Belt Warning Light.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 308 T7
• Product Codes: 8975K9, 8975.K9
• Other Numbers: No Additional Numbers Provided

Notes For Mechanics And DIYers

This Component Is Frequently Searched By Its Product Code 8975K9. When Replacing Any Seat Belt Fixing, Treat The Part As A Safety-Critical Item: Use Correct Fasteners, Follow Manufacturer Procedures, And Verify Proper Operation Before Returning The Vehicle To Service. If The Vehicle Has Been Involved In An Accident, Inspect Surrounding Structure And Replace Any Damaged Components To Ensure System Integrity.

Product Overview

This seat belt bracket / buckle holder is designed for the passenger seat of the Peugeot 308 T7. It is a direct-fit component intended to restore correct seat belt positioning and secure latching on the passenger side. Commonly searched under OE code 8975K9, this part is suitable for professional workshops and experienced DIY technicians who perform interior and safety-related repairs.

Why Choose This Part

Replacing a worn or damaged seat belt bracket ensures reliable buckle engagement and maintains occupant safety. The part fits original mounting points and is a practical choice when the original bracket is bent, corroded or the buckle receiver is loose. Keeping the original geometry and mounting integrity is essential for proper seat belt function.

How It Is Replaced

Replacement should be performed by a qualified technician or an experienced DIYer familiar with vehicle safety systems. Typical steps include:

• Remove interior trim panels around the seat and B-pillar as required to access mounting bolts.
• Unbolt the existing bracket from its mounting points. Retain or replace fasteners according to condition and manufacturer guidance.
• Transfer any sensors, wiring clips or trim guides from the old bracket to the new one.
• Install the new bracket, tighten bolts to the manufacturer’s torque specifications and verify correct alignment of the buckle receiver.
• Check seat belt latch engagement and reassemble trim. Verify that no warning lights or faults are present and confirm the belt retracts and latches smoothly.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work On Seat Belt Or Airbag-Related Components To Prevent Accidental Deployment.
• Use Correct Torque Values For Mounting Bolts; Refer To The Vehicle Service Manual For Exact Specifications.
• Inspect Fasteners And Replace Corroded Or Stretched Bolts; Do Not Reuse Damaged Fixings.
• Ensure All Wiring Clips And Trim Are Reinstalled To Avoid Rubbing Or Pinching Of Cables.
• If The Vehicle Has Been Involved In A Collision, Replace Pretensioners And Any Airbag-Related Components Following Manufacturer Guidelines.

Reasons For Failure

Seat belt brackets typically fail or require replacement for the following reasons:

• Accident Damage Or Impact Leading To Bent Or Cracked Bracket Geometry.
• Corrosion From Moisture, Road Salt Or Long-Term Exposure, Weakening The Mounting Points.
• Wear Or Damage To The Buckle Receiver Causing Poor Latching Or Intermittent Release.
• Loose Or Missing Mounting Bolts Causing Movement And Incorrect Belt Positioning.
• Incorrect Previous Repairs Or Improper Installation.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: 308 T7 (Passenger Seat)
• Product Codes: 8975K9
• Other Numbers: 8975.K9

Compatibility And Notes

Intended For: Passenger Side Of Peugeot 308 T7. Verify Visual Match With Existing Part Before Installation. This component is focused on mechanical mounting and buckle reception; if the vehicle reports belt-system faults after replacement, further diagnosis of pretensioners, sensors and control modules may be required.

Final Advice

Keep Safety A Priority: Work Carefully Around Seat Belt And Airbag Systems. If You Are Unsure About Any Step, Consult A Professional Workshop Or The Vehicle Service Manual To Ensure Correct And Safe Installation.